Archeage

Archeage, a 2014 MMORPG, presents an interesting scaling challenge for the Intel Core i7-14700KF and NVIDIA GeForce RTX 4070 Ti SUPER combination. The data shows a clear progression of performance costs as resolution increases, but the pattern is not uniform across all settings presets. This analysis breaks down the measured FPS to understand where the bottleneck lies and what the optimal experience is for this specific hardware pairing.

Resolution Scaling

The measured FPS shows that this combo is heavily influenced by the graphics settings chosen, with resolution acting as a secondary multiplier on that load. At 1080p with Low settings, the system achieves 251 FPS. Moving to 1440p Low drops this to 164.8 FPS, a 34% reduction. At 4K Low, the average falls to 96.9 FPS, which is another 41% drop from the 1440p figure. This steep decline indicates that even at the lowest visual quality, the GPU is becoming the primary limiting factor as pixel count increases.

The scaling pattern changes dramatically when looking at the Ultra preset. At 1080p Ultra, the combo produces 103.7 FPS. At 1440p Ultra, this falls to 69.4 FPS. The 4K Ultra result is 37.3 FPS. The relative drop from 1080p to 4K at Ultra is steeper than at Low, suggesting that the combination of high resolution and high graphical fidelity places an exponential load on the RTX 4070 Ti SUPER. The data indicates that the CPU is more than capable of feeding frames at lower resolutions, but the GPU's rendering workload dominates the equation once resolution and settings are maxed out.

For the High preset, the scaling is more moderate. 1080p High yields 150.3 FPS, 1440p High yields 99.5 FPS, and 4K High yields 60.6 FPS. The drop from 1440p to 4K is a 39% reduction, which is consistent with the idea that the GPU is the limiting component in this scenario. The fact that 4K High is just above the 60 FPS threshold, while 4K Ultra falls well below it, highlights that the Ultra preset's additional effects are disproportionately expensive at higher resolutions.

How This Combo Ranks

The Intel Core i7-14700KF and NVIDIA GeForce RTX 4070 Ti SUPER combination ranks 178th out of 1727 tested combos for Archeage. This places the setup in the top 10.3% of all configurations tested for this game. The rank suggests that while this is a high-end pairing, it is not at the absolute top tier for Archeage, which likely favors other hardware combinations with different characteristics.

The CPU itself sits in the 96th percentile when compared against all processors, and its average benchmark score is 70104. Its nearest rival is the Intel Core i7-14700K with an average score of 70074 and a deltaPct of 0, indicating they are effectively performance equals. The AMD Ryzen 9 9950X scores 70420, which is a -0.4% delta, meaning the i7-14700KF is slightly behind it. The Intel Xeon Platinum 8270 scores 71056, a -1.3% delta, showing that the consumer i7 is slightly behind this server-class chip in synthetic benchmarks, though real-world gaming performance often differs.

The GPU's percentile is 86 when compared against all GPUs, with an average benchmark score of 48704. Its nearest rival, the NVIDIA CMP 50HX, scores 49071, a -0.7% delta, meaning the RTX 4070 Ti SUPER is marginally behind it. The NVIDIA RTX A2000 scores 47915, a +1.6% delta in favor of the 4070 Ti SUPER. These synthetic benchmarks provide context for the GPU's compute potential, but the Archeage-specific ranking is what matters for this analysis.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. At 1080p, all presets are playable, but the High preset at 150.3 FPS offers a good balance between visual quality and headroom. The Ultra preset at 103.7 FPS is also viable if maximum fidelity is desired, as it remains well above the 60 FPS threshold.

At 1440p, the High preset at 99.5 FPS is the sweet spot. The Medium preset at 147.4 FPS offers higher performance but with a visible reduction in visual quality. The Ultra preset at 69.4 FPS is still technically playable, but the drop below 70 FPS may introduce noticeable stutter in a fast-paced MMORPG. The Low preset at 164.8 FPS is only recommended for competitive play where frame rate is paramount over visuals.

At 4K, the options become more constrained. The High preset at 60.6 FPS is the only preset that delivers a playable experience near the standard 60 FPS target. The Medium preset at 83.5 FPS is also solid, offering a slight performance boost over High. The Low preset at 96.9 FPS is surprisingly playable and might be the best choice for consistent high frame rates at 4K. The Ultra preset at 37.3 FPS is not recommended for general play, as it falls below the playability threshold and will likely feel sluggish.

Measured FPS Breakdown

The complete measured FPS table for this combo is as follows. At 3840x2160, the average FPS is 60.6 on High, 96.9 on Low, 83.5 on Medium, and 37.3 on Ultra. At 2560x1440, the average FPS is 99.5 on High, 164.8 on Low, 147.4 on Medium, and 69.4 on Ultra. At 1920x1080, the average FPS is 150.3 on High, 251 on Low, 220.2 on Medium, and 103.7 on Ultra.

The data reveals a consistent pattern where the Low preset provides the highest frame rate at every resolution, followed by Medium, then High, with Ultra being the most demanding. The gap between Medium and High is notable, but the gap between High and Ultra is even larger. For instance, at 1440p, the drop from High (99.5 FPS) to Ultra (69.4 FPS) is a 30% reduction, while the drop from Medium (147.4 FPS) to High (99.5 FPS) is a 32% reduction. This suggests that the Ultra preset includes a significant number of computationally expensive effects.

GPU Role

The NVIDIA GeForce RTX 4070 Ti SUPER has 16 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 672.3 GB/s. This memory configuration is substantial for a modern game, and the data suggests that it is sufficient for Archeage even at 4K, as the frame rate drops are more attributable to raw compute than memory capacity limits. The GPU's base clock is 2340 MHz, with a boost clock of 2610 MHz.

The GPU's compute capabilities are defined by its 8448 shading units, 264 TMUs, and 96 ROPs. It has 66 RT cores and 264 tensor cores, which are features of the Ada Lovelace architecture. The FP32 performance is 44.10 TFLOPS. These specifications contribute to the GPU's ability to handle the various rendering tasks in Archeage, from geometry to post-processing effects.

The measured FPS data shows that the GPU is the limiting factor at higher resolutions, particularly with the Ultra preset. The fact that the 4K Ultra result is 37.3 FPS, while 1080p Ultra is 103.7 FPS, indicates that the GPU's rendering pipeline is saturated by the combination of high resolution and maximum settings. The GPU's role is therefore critical in determining the overall experience, and users should consider its performance characteristics when selecting settings.

FAQ

Q: What is the best resolution for this combo to maintain a high frame rate?

A: At 1080p, the combo can achieve 251 FPS on Low and 150.3 FPS on High, making it an excellent choice for high-refresh-rate monitors. At 1440p, the High preset at 99.5 FPS is also strong.

Q: Can this combo handle 4K gaming in Archeage?

A: Yes, but with caveats. The High preset at 3840x2160 delivers an average of 60.6 FPS, which is playable. The Ultra preset at 4K drops to 37.3 FPS, which is not recommended.

Q: How does the Ultra preset compare to High in terms of performance?

A: The Ultra preset is significantly more demanding. At 1440p, High yields 99.5 FPS while Ultra yields 69.4 FPS, a 30% reduction. At 4K, the drop is from 60.6 FPS to 37.3 FPS.

Q: What is the performance difference between Low and Medium settings?

A: The Low preset provides the highest frame rates. At 1080p, Low is 251 FPS while Medium is 220.2 FPS. At 1440p, Low is 164.8 FPS and Medium is 147.4 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data indicates that the GPU is the limiting factor at higher resolutions and settings. The CPU's strong performance is evident at 1080p Low (251 FPS), but the GPU's load becomes dominant as resolution increases.

Q: How does this combo rank compared to other tested systems?

A: The combo ranks 178th out of 1727 tested combinations for Archeage, placing it in the top 10.3% of all tested configurations.