Roblox

FAQ

Q: What is the combo rank of the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 3070 in Roblox?

A: This combination ranks 1596 out of 3711 tested combos in the database, placing it in the upper-middle portion of all tested systems for this game.

Q: What is the highest average FPS recorded for this combo?

A: The highest recorded average is 413 FPS, achieved at 1920x1080 resolution with Low settings.

Q: What is the lowest average FPS recorded for this combo?

A: The lowest recorded average is 102 FPS, achieved at 3840x2160 resolution with Ultra settings.

Q: Does the RTX 3070 outperform the AMD Radeon RX 7600 XT in average benchmark score?

A: Yes, the RTX 3070's average benchmark score of 17208 is 0.7% higher than the RX 7600 XT's score of 17083.

Q: How does the Ryzen 5 2600 compare to the Intel Core Ultra 5 228V in average benchmark score?

A: The Ryzen 5 2600 scores 21484 on average, which is 0.2% higher than the Intel Core Ultra 5 228V's score of 21440.

Q: What is the launch MSRP of the RTX 3070?

A: The launch MSRP is 499 USD.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip, manufactured on an 8 nm process at Samsung. It carries 5888 shading units, 184 texture mapping units, and 96 raster output units, along with 46 ray tracing cores and 184 tensor cores. The GPU operates with a base clock of 1500 MHz and a boost clock of 1725 MHz, while the memory clock runs at 1750 MHz with 14 Gbps effective speed.

The 8 GB of GDDR6 memory sits on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. This memory configuration matters for Roblox because the game's blocky geometry and texture streaming can be demanding at high resolutions, though the RTX 3070's bandwidth is more than sufficient here. The GPU's pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s help explain why frame rates remain high even when settings are pushed to Ultra.

In benchmark results, the RTX 3070 scores 22214 in Passmark G3D, 112821 in Geekbench OpenCL, and 21022 in Geekbench Vulkan. Its percentile ranking against all GPUs is 61, meaning it sits above the majority of tested graphics cards. The average benchmark score of 17208 places it close to the AMD Radeon RX 7600 XT (0.7% higher), the NVIDIA GeForce GTX 690 (1% higher), and the AMD Radeon HD 7970M (1.1% higher). It trails the NVIDIA Tesla K40c by 1.5%.

The GPU's role in Roblox becomes evident when looking at the measured FPS data. At 1080p, the RTX 3070 pushes average frame rates from 270 FPS on Ultra up to 413 FPS on Low, indicating that the GPU is rarely the bottleneck at this resolution. Even at 4K, the card maintains 102 FPS on Ultra and 156 FPS on Low, showing that it has ample headroom for this game's rendering demands. The 8 GB VRAM is never a limiting factor in these results, as the game's textures do not appear to exceed that capacity even at 3840x2160.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen architecture (specifically Zen+ Pinnacle Ridge), manufactured on a 12 nm process at GlobalFoundries. It runs at a base clock of 3.40 GHz with a boost clock of 3.90 GHz, and its 65 W TDP reflects the efficiency of this 2000-series chip. The CPU supports DDR4 memory in a dual-channel configuration with a bandwidth of 46.9 GB/s, and it connects via PCIe Gen 3 with 16 lanes.

The cache hierarchy includes 96 KB of L1 per core, 512 KB of L2 per core, and 16 MB of shared L3 cache. This configuration supports the CPU's benchmark results, which include a Cinebench R15 multicore score of 1248 and a single-core score of 157.3. The Geekbench multicore score is 5648, while the single-core score is 1154. Passmark results show a multithread score of 13160, a single-thread score of 2239, and a physics score of 673.

The Ryzen 5 2600 ranks in the 75th percentile against all CPUs, with an average benchmark score of 21484. Its nearest rivals include the Intel Core Ultra 5 228V (0.2% higher score), the Intel Core i9-11900H (0.5% lower), the Intel Xeon D-1746TER (0.7% lower), and the AMD EPYC 9454 (1.2% higher). This places the CPU in a competitive position for a 6-core part from 2018.

In Roblox, the CPU's role is significant because the game is known for its physics simulation and scripting logic, which rely heavily on single-threaded performance. The Ryzen 5 2600's boost clock of 3.90 GHz and its single-core Passmark score of 2239 suggest it can handle the game's logic, but the data indicates that at lower resolutions, the CPU becomes the limiting factor. At 1080p Low, the average FPS is 413, while at 1080p Ultra it is 270 — this gap is smaller than what the GPU alone would suggest, implying the CPU is capping performance in some scenarios. The 6 cores and 12 threads provide enough parallelism for background tasks, but Roblox's main thread likely holds the system back from reaching even higher frame rates at 1080p.

How This Combo Ranks

The combination of the AMD Ryzen 5 2600 and the NVIDIA GeForce RTX 3070 ranks 1596 out of 3711 tested combos in Roblox, which places it in the 43rd percentile of all tested systems. This rank reflects a pairing where the GPU is substantially more capable than the CPU for this game's workload.

To contextualize this rank, consider the individual components' positions. The RTX 3070 sits in the 61st percentile among all GPUs, while the Ryzen 5 2600 sits in the 75th percentile among all CPUs. If both components performed at their relative strengths, one might expect a higher combo rank. However, Roblox's performance profile appears to be influenced by factors beyond raw compute, such as game engine bottlenecks and single-threaded logic.

The combo rank of 1596 out of 3711 means there are 2115 other combinations that perform better in this game. This is not a poor showing — the system still achieves triple-digit frame rates at all tested resolutions and settings — but it indicates that the Ryzen 5 2600 is holding back the RTX 3070 from its full potential in Roblox. The GPU's high benchmark scores relative to its rivals do not translate into top-tier combo rankings because the CPU cannot feed frames fast enough at lower resolutions.

The data suggests that this combo is best suited for high-resolution gaming, where the GPU's workload increases and the CPU bottleneck becomes less pronounced. At 4K Ultra, the system delivers 102 FPS, which is still well above the 60 FPS threshold for smooth gameplay. The rank of 1596 reflects a system that is capable but not optimized for maximum frame rates in Roblox, particularly at 1080p where the CPU limits performance.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing a comprehensive view of how this combo performs across the spectrum.

At 1920x1080, the system achieves its highest frame rates. Low settings produce an average of 413 FPS, Medium produces 376 FPS with a minimum of 320 and a maximum of 432, High produces 332 FPS, and Ultra produces 270 FPS. The spread from Low to Ultra is 143 FPS, indicating that the settings preset has a substantial impact on performance at this resolution. The Medium preset's minimum of 320 FPS shows that even in demanding scenes, the system stays well above 300 FPS.

At 2560x1440, the frame rates remain high but show a clearer drop. Low settings average 276 FPS, Medium averages 251 FPS with a minimum of 213 and a maximum of 289, High averages 222 FPS, and Ultra averages 180 FPS. The drop from 1080p to 1440p is consistent across settings, with an average reduction of roughly 35% in FPS.

At 3840x2160, the system still delivers playable frame rates but the GPU workload becomes more significant. Low settings average 156 FPS, Medium averages 142 FPS with a minimum of 121 and a maximum of 163, High averages 125 FPS, and Ultra averages 102 FPS. The drop from 1440p to 4K is steeper, with an average reduction of roughly 45% in FPS across settings.

The Medium preset is the only one with recorded minimum and maximum values at every resolution, providing insight into frame time consistency. At 1080p Medium, the minimum of 320 FPS and maximum of 432 FPS represent a 35% variance from the average. At 1440p Medium, the range is 213 to 289 FPS, and at 4K Medium, it is 121 to 163 FPS. This consistency suggests that the system maintains stable performance without major frame time spikes.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p Medium, the system averages 376 FPS with a minimum of 320 FPS, providing a smooth experience with headroom for any display refresh rate. At 1440p Medium, the average of 251 FPS with a minimum of 213 FPS still exceeds the requirements of high-refresh-rate monitors. Even at 4K Medium, the average of 142 FPS with a minimum of 121 FPS remains well above the 60 FPS threshold.

The High preset is also viable, particularly at 1080p where it averages 332 FPS, but it does not offer a significant visual improvement over Medium in Roblox's art style. The Ultra preset, while delivering 270 FPS at 1080p and 102 FPS at 4K, shows diminishing returns for the performance cost. The drop from Medium to Ultra at 4K is 40 FPS (from 142 to 102), which is a 28% reduction in frame rate for what is likely a marginal visual gain in this game.

For players with high-refresh-rate monitors (144 Hz or higher), Medium at 1080p or 1440p is the recommended preset, as it maintains minimum frame rates above 213 FPS. For players with 4K displays, Medium provides the best experience with a minimum of 121 FPS, ensuring smooth gameplay without sacrificing the visual fidelity that comes with the medium preset's settings. The Low preset, while offering the highest frame rates, is not recommended because the performance gain over Medium is relatively small — only 37 FPS at 1080p and 14 FPS at 4K — and the visual quality reduction is more noticeable.

Resolution Scaling

The FPS data reveals how the system's performance scales from 1080p to 4K, and this scaling pattern indicates which component is the limiting factor at each resolution.

At 1080p Low, the system averages 413 FPS. Moving to 1440p Low, the average drops to 276 FPS, a reduction of 33%. At 4K Low, the average is 156 FPS, a further reduction of 43% from 1440p. This scaling pattern shows that the GPU becomes more of a bottleneck as resolution increases, which is expected given the increasing pixel count.

The Ultra preset shows a similar but slightly different pattern. At 1080p Ultra, the average is 270 FPS. At 1440p Ultra, it drops to 180 FPS, a 33% reduction. At 4K Ultra, it drops to 102 FPS, a 43% reduction from 1440p. This consistency across settings suggests that the resolution scaling is primarily driven by the GPU's pixel throughput capabilities.

The key insight from the resolution scaling data is the relationship between CPU and GPU limits. At 1080p, the CPU is the primary limiting factor. The fact that the system achieves 413 FPS on Low but only 270 FPS on Ultra — a difference of 143 FPS — suggests that the CPU can only feed a certain number of frames per second, and the GPU's workload at Low settings is insufficient to fully utilize its capability. The Ryzen 5 2600's single-thread performance of 2239 in Passmark likely caps the frame rate in CPU-bound scenarios.

As resolution increases, the GPU becomes the limiting factor. At 4K, the GPU's workload increases significantly, and the system's frame rates drop accordingly. The RTX 3070's 8 GB of VRAM and 448.0 GB/s bandwidth are sufficient for Roblox at 4K, as evidenced by the 102 FPS average on Ultra, but the GPU's compute capability (20.31 TFLOPS FP32) begins to show its limits at this resolution.

The overall scaling pattern — roughly 33% drop from 1080p to 1440p and 43% drop from 1440p to 4K — is consistent with a system that is CPU-bound at lower resolutions and GPU-bound at higher resolutions. This means that for players using this combo, the optimal experience depends on their resolution choice. At 1080p, the system is wasting GPU potential, while at 4K, it is fully utilizing both components. The sweet spot appears to be 1440p, where the balance between CPU and GPU load produces frame rates that are high enough (180-276 FPS depending on settings) to take advantage of most high-refresh-rate displays.