Roblox

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process at TSMC, featuring 18,900 million transistors on a 159 mm² die. Its boost clock reaches 2460 MHz on a base of 1830 MHz, while the memory runs at 2125 MHz with 17 Gbps effective speed. The 8 GB of GDDR6 memory sits on a 128-bit bus, delivering 272.0 GB/s of bandwidth.

In Roblox, the GPU's role is substantial across all measured resolutions. At 1920x1080 with Low settings, the RTX 4060 produces 366.4 FPS average, which drops to 236.5 FPS at Ultra. This shows that even at the highest preset, the card maintains a very high frame rate. The 3DMark Steel Nomad DX12 score of 2302 and PassMark G3D score of 19545 place this GPU at the 66th percentile among all GPUs. Its nearest rivals include the AMD Radeon RX 6600M (0.6% lower average score), the NVIDIA GeForce GTX 780 Ti (0.7% lower), the Intel Arc B580 (0.7% higher), and the AMD Radeon 760M (0.8% higher).

The memory bandwidth of 272.0 GB/s appears sufficient for Roblox's demands, as frame rates scale consistently with resolution changes. Moving from 1080p to 1440p at High settings reduces the average from 293.1 FPS to 197.1 FPS, a drop of roughly 33%. At 4K High, the average falls to 109.7 FPS. These results indicate that the GPU's 8 GB VRAM and 128-bit bus do not bottleneck gameplay, even at Ultra settings in 4K, where the average remains at 93 FPS.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate this combo achieves in Roblox?

A: The highest measured average is 366.4 FPS at 1920x1080 with Low settings. The second-highest is 328.6 FPS at the same resolution with Medium settings.

Q: How does the RTX 4060 compare to its nearest GPU rival in overall benchmark scores?

A: The RTX 4060 has an average benchmark score of 23181. The closest rival is the Intel Arc B580 with 23021, which is 0.7% higher. The AMD Radeon RX 6600M scores 23321, which is 0.6% lower than the RTX 4060.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings produce 242.4 FPS average, while Ultra produces 158 FPS. This represents a difference of 84.4 FPS, or approximately 35% lower performance at Ultra compared to Low.

Q: Does the combo maintain playable frame rates at 4K resolution?

A: Yes. At 3840x2160, the lowest measured average is 93 FPS at Ultra settings. Medium settings yield 124 FPS, High yields 109.7 FPS, and Low yields 138.1 FPS. All presets remain above 90 FPS average.

Q: How does the Ryzen 5 2600's multi-core performance compare to its nearest CPU rival?

A: The Ryzen 5 2600 has an average benchmark score of 19616. The Intel Core i5-1345U scores 19691 (0.4% lower), the AMD Ryzen 5 7530U scores 19508 (0.6% higher), the Intel Core i5-11600KF scores 19740 (0.6% lower), and the Intel Core i7-10700F scores 19485 (0.7% higher).

Q: What are the Cinebench R23 scores for the Ryzen 5 2600?

A: The Ryzen 5 2600 scores 11186 in Cinebench R23 multi-core and 1579 in single-core. These results place the CPU at the 77th percentile among all CPUs.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, based on the Zen+ (Pinnacle Ridge) architecture. It operates at a base clock of 3.40 GHz with a boost clock of 3.90 GHz, drawing 65 W TDP. The CPU features 96 KB of L1 cache per core, 512 KB of L2 cache per core, and 16 MB of shared L3 cache. Memory support is DDR4 with dual-channel configuration, providing 46.9 GB/s bandwidth.

In Cinebench R20, the processor scores 4698 multi-core and 663 single-core. The PassMark multi-thread score is 13160, while single-thread scores 2239. These benchmarks place the Ryzen 5 2600 at the 77th percentile among all CPUs, with an average benchmark score of 19616. Its nearest rivals are tightly clustered: the Intel Core i5-1345U (0.4% lower), AMD Ryzen 5 7530U (0.6% higher), Intel Core i5-11600KF (0.6% lower), and Intel Core i7-10700F (0.7% higher).

For Roblox, the CPU's role is evident in the frame rate scaling across resolutions. At 1080p Low, the combo reaches 366.4 FPS, which suggests the CPU can feed the GPU efficiently. However, at 4K Ultra, the average drops to 93 FPS, indicating that resolution and settings—not CPU throughput—become the limiting factor. The Ryzen 5 2600's 12 threads and 16 MB L3 cache provide adequate headroom for Roblox's sandbox workloads, which often involve physics calculations and world generation. The PassMark physics score of 673 and floating-point math score of 22942 support this interpretation.

Settings Recommendations — which preset gives the best experience per the measured rows

Examining the measured FPS data, the Medium preset offers the most balanced experience across all resolutions. At 1920x1080, Medium delivers 328.6 FPS average, which is only 37.8 FPS lower than Low but 92.1 FPS higher than Ultra. The visual quality improvement from Low to Medium is substantial, while the frame rate cost is modest.

At 2560x1440, Medium yields 221.8 FPS average, compared to 242.4 FPS on Low and 158 FPS on Ultra. This represents a 29% performance increase over Ultra while retaining most visual fidelity. At 3840x2160, Medium produces 124 FPS average, which is higher than High (109.7 FPS) and Ultra (93 FPS), and only 14.1 FPS below Low (138.1 FPS).

The data consistently shows Medium as the sweet spot. At 1080p, it keeps frame rates above 300 FPS; at 1440p, above 200 FPS; and at 4K, above 120 FPS. For users with high-refresh displays, Low at 1440p (242.4 FPS) or 1080p (366.4 FPS) maximizes frame rates, but the Medium preset provides a better visual-to-performance ratio without dropping below playable thresholds. Ultra settings are only recommended for 1080p displays, where 236.5 FPS average still exceeds most monitor refresh rates.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 4060 ranks 1033 out of 1800 tested combos in Roblox. This places the pairing in the upper-middle tier of all configurations measured. The rank reflects the balance between the CPU and GPU: the Ryzen 5 2600 sits at the 77th percentile among CPUs, while the RTX 4060 sits at the 66th percentile among GPUs.

Given that the combo rank is 1033 out of 1800, there are 767 tested combinations that perform better in Roblox. This is notable because the individual components are not top-tier by percentile—the CPU is above average and the GPU is slightly above average. The rank suggests that in Roblox, the CPU's single-thread performance (Cinebench R23 single-core score of 1579) may be a limiting factor for the GPU's potential, as the game often relies on single-threaded workloads.

The gap between the CPU and GPU percentiles (77 vs 66) indicates a reasonable pairing, but the combo rank of 1033 (57.4% of tested combos) suggests that users seeking higher frame rates in Roblox would benefit from a CPU with better single-core performance. Conversely, the RTX 4060's strong showing at 1080p (366.4 FPS at Low) demonstrates that the GPU is not the primary constraint at lower resolutions.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

1920x1080:

• Low: 366.4 FPS average
• Medium: 328.6 FPS average
• High: 293.1 FPS average
• Ultra: 236.5 FPS average

The progression from Low to Ultra shows a consistent decline of roughly 35-40 FPS per preset step. The largest gap is between High and Ultra (56.6 FPS), while the smallest is between Medium and High (35.5 FPS).

2560x1440:

• Low: 242.4 FPS average
• Medium: 221.8 FPS average
• High: 197.1 FPS average
• Ultra: 158 FPS average

At 1440p, the differences between presets become more pronounced. The gap from Low to Medium is 20.6 FPS, from Medium to High is 24.7 FPS, and from High to Ultra is 39.1 FPS. The Ultra preset shows the largest relative drop, at 34.8% below Low.

3840x2160:

• Low: 138.1 FPS average
• Medium: 124 FPS average
• High: 109.7 FPS average
• Ultra: 93 FPS average

At 4K, all presets remain above 90 FPS. The scaling from Low to Ultra is nearly linear: Low to Medium is 14.1 FPS, Medium to High is 14.3 FPS, and High to Ultra is 16.7 FPS. This consistency indicates that the RTX 4060's memory bandwidth of 272.0 GB/s is adequate for 4K Roblox rendering, though the absolute frame rates are lower than at 1080p or 1440p.

Comparing across resolutions at the same preset, the 1080p-to-1440p drop averages about 33-35%, while the 1440p-to-4K drop averages about 43-45%. This scaling pattern is typical for a GPU with 8 GB VRAM and a 128-bit bus, where pixel throughput becomes the limiting factor at higher resolutions.