Red Dead Redemption 2
This combination provides smooth gameplay with an average of 118 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 50 | 69 | 84 | 110 |
| 1440p QHD | 77 | 105 | 125 | 168 |
| 1080p Full HD | 101 | 140 | 168 | 222 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core Ultra 7 155H + NVIDIA GeForce RTX 5050, In-Depth Analysis
# Red Dead Redemption 2 — Intel Core Ultra 7 155H + NVIDIA GeForce RTX 5050
This combination of the Intel Core Ultra 7 155H mobile processor and NVIDIA GeForce RTX 5050 laptop GPU delivers a playable but constrained experience in Red Dead Redemption 2, with the measured data showing a clear pattern of GPU-bound performance that scales predictably with resolution and preset. The combo ranks 2325th out of 2902 tested combinations in this game, placing it in the lower-mid tier of the database, and the frame rates across all resolutions suggest that users will need to make deliberate settings choices to hit smooth gameplay targets.
Resolution Scaling
The measured FPS data reveals a steep and consistent drop as resolution increases, which is the classic signature of a GPU-limited scenario. At 1080p with Low settings, the combo averages 81 FPS, but that falls to 60 FPS at 1440p — a 25.9% reduction — and then to 40 FPS at 4K, another 33.3% drop from the 1440p figure. This scaling is not linear; the pixel count increases by 78% from 1080p to 1440p, yet the frame rate drops by only 25.9%, suggesting some headroom in the GPU's fill rate or bandwidth at lower resolutions. However, from 1440p to 4K, the pixel count doubles, and the FPS drops by exactly one-third, indicating that the RTX 5050's 8 GB GDDR6 memory and 128-bit bus are becoming the limiting factors.
The pattern holds across all settings presets. At High settings, the averages are 51 FPS at 1080p, 38 FPS at 1440p, and 25 FPS at 4K — a consistent 25-34% penalty per resolution step. At Ultra, the numbers are 36, 27, and 18 FPS respectively, with the 4K result being only half of the 1080p figure. The Medium preset shows the same trend: 61 FPS at 1080p, 45 FPS at 1440p, and 30 FPS at 4K. The consistency of these deltas across presets strongly indicates that resolution scaling is independent of the graphics settings — the GPU is the bottleneck in every configuration, and the CPU's 16 cores and 22 threads are not constraining the frame rate at any resolution.
The most telling data point is the 4K Ultra result of 18 FPS, which is barely a slideshow and illustrates the hard ceiling of this GPU in this game. Even at 4K Low, the 40 FPS average is below the 60 FPS target that most players would consider smooth. The data suggests that 1080p is the only resolution where this combo can approach high refresh rates, and even there, only the Low preset exceeds the 60 FPS threshold (at 81 FPS). The resolution scaling curve is steep enough that the RTX 5050's 13.17 TFLOPS FP32 compute and 320.0 GB/s bandwidth are simply insufficient for 4K gaming in Red Dead Redemption 2, regardless of the CPU's capabilities.
How This Combo Ranks
The combo's rank of 2325 out of 2902 tested combinations places it in the bottom 20% of all CPU-GPU pairings tested in this game. This is a meaningful data point because it reflects the overall gaming performance of this specific pairing, not just the individual component scores. The RTX 5050 itself holds a percentile of 66 against all GPUs, meaning it outperforms roughly two-thirds of the GPUs in the database, yet the combo rank is far lower — this discrepancy indicates that the mobile form factor and the specific demands of Red Dead Redemption 2 penalize this pairing more than average.
The CPU's individual standing is solid: the Intel Core Ultra 7 155H sits at the 83rd percentile against all CPUs, with an average benchmark score of 32697, which is essentially tied with its nearest rivals — the Intel Core i5-14600T (32707, 0% delta), the AMD Ryzen AI 7 PRO 360 (32662, +0.1% delta), and the AMD Ryzen 5 7400F (32750, -0.2% delta). This near-identical performance cluster suggests that the CPU is not the differentiator here; instead, the RTX 5050's 66th percentile GPU standing is what drags the combo down to the 2325th rank. The GPU's nearest rivals include the AMD Radeon RX Vega M GL (21153, -0.6% delta) and the AMD Radeon HD 8970M (21237, -1% delta), which are older or lower-tier parts, yet the RTX 5050 only marginally outperforms them in average benchmark score (21035 versus 21153 and 21237).
This ranking context is crucial: the combo ranks poorly in this specific game because Red Dead Redemption 2 is demanding on both GPU memory and fill rate, and the RTX 5050's 8 GB VRAM and 32 ROPs are modest for a 2018 title that still scales heavily with resolution. The CPU's performance headroom is evident from its rivals' scores, but the GPU cannot translate that headroom into playable frame rates at higher resolutions.
GPU Role
The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture with a GB207 chip, fabricated on TSMC's 5 nm process with 16,900 million transistors on a 149 mm² die. Its 2560 shading units, 80 TMUs, and 32 ROPs deliver a pixel rate of 82.30 GPixel/s and a texture rate of 205.8 GTexel/s, with FP32 compute rated at 13.17 TFLOPS. The memory subsystem is 8 GB of GDDR6 on a 128-bit bus, yielding 320.0 GB/s of bandwidth — a configuration that is adequate for 1080p but becomes a bottleneck at 4K in this game.
The measured FPS data directly reflects the GPU's capabilities and limits. At 1080p Low, the 81 FPS average shows the GPU can handle the game's lighter loads, but the 4K Ultra result of 18 FPS demonstrates that the 8 GB VRAM and 128-bit bus are overwhelmed by the larger framebuffer and higher texture detail. The base clock of 2317 MHz and boost clock of 2572 MHz are respectable for a mobile part, but the 130 W TDP and dual-slot design constrain sustained performance in a laptop chassis. The GPU's benchmark scores corroborate this: the Passmark G3D score of 17326 and 3DMark Steel Nomad DX12 score of 2502 place it in the 66th percentile, but the nearest rivals' scores (within -1.6% to +1.6%) show that the RTX 5050 is not a class leader — it merely edges out older parts like the Radeon RX Vega M GL and HD 8970M.
In the context of Red Dead Redemption 2, the GPU's 8 GB memory capacity is the most likely culprit for the steep 4K performance cliff. The game's open-world environments and high-resolution textures consume significant VRAM, and the 128-bit bus cannot feed the GPU fast enough at 4K, as evidenced by the 25 FPS average at High settings — a 50% drop from the 1080p High result of 51 FPS. The GPU's 20 RT cores and 80 tensor cores are largely irrelevant for this title, which does not rely heavily on ray tracing or DLSS, so the raw rasterization throughput and memory bandwidth are the determining factors.
Measured FPS Breakdown
At 1920x1080, the combo delivers its best results across all presets. Low settings produce an average of 81 FPS, which is the only preset to exceed the 60 FPS threshold at any resolution. Medium settings yield 61 FPS with a minimum of 51 FPS and maximum of 70 FPS, providing a solidly playable experience with a 10 FPS variance. High settings drop to 51 FPS average, still playable but with less headroom. Ultra settings fall to 36 FPS, which is borderline for smooth gameplay, though it remains above the 30 FPS playability floor.
At 2560x1440, the frame rates decrease noticeably. Low settings average 60 FPS, exactly at the target, while Medium drops to 45 FPS with a range of 38 to 52 FPS. High settings average 38 FPS, and Ultra falls to 27 FPS — below the 30 FPS playability threshold. The 1440p results show that only Low and Medium presets are viable for a smooth experience, and even Medium's 45 FPS average may feel inconsistent during busy scenes given the 14 FPS variance between minimum and maximum.
At 3840x2160, the combo struggles across the board. Low settings average 40 FPS, Medium drops to 30 FPS with a minimum of 25 FPS and maximum of 34 FPS, High falls to 25 FPS, and Ultra bottoms out at 18 FPS. None of these results meet the 60 FPS target, and only Low approaches a playable 40 FPS average. The 4K data strongly suggests that this resolution is beyond the RTX 5050's intended design envelope for this game, and users should avoid it unless they prioritize visual fidelity over frame rate.
The full data table shows a clear hierarchy: 1080p Low (81 FPS) > 1080p Medium (61 FPS) > 1440p Low (60 FPS) > 1080p High (51 FPS) > 1440p Medium (45 FPS) > 4K Low (40 FPS) > 1080p Ultra (36 FPS) > 1440p High (38 FPS) > 1080p Ultra's sibling 1440p Ultra (27 FPS) > 4K Medium (30 FPS) > 4K High (25 FPS) > 4K Ultra (18 FPS). This ordering reveals that dropping resolution is more effective than dropping settings — 1440p Low achieves 60 FPS, while 1080p High only reaches 51 FPS, suggesting that the GPU's fill rate is the primary constraint, not the shading complexity.
FAQ
Q: What is the best resolution for this combo in Red Dead Redemption 2?
A: Based on the measured data, 1920x1080 is the only resolution where the combo consistently exceeds 30 FPS across all presets, with Low achieving 81 FPS and Medium at 61 FPS. 1440p is only viable at Low settings (60 FPS), while 4K results range from 18 to 40 FPS depending on preset.
Q: How does the RTX 5050 compare to its nearest GPU rivals?
A: The RTX 5050's average benchmark score is 21035, which is 0.6% below the AMD Radeon RX Vega M GL (21153), 1% below the AMD Radeon HD 8970M (21237), and 1.6% above the AMD Radeon RX 5600 XT (20713). It sits at the 66th percentile against all GPUs.
Q: Is the CPU or GPU the limiting factor in this game?
A: The data indicates the GPU is the bottleneck. The Intel Core Ultra 7 155H ranks at the 83rd percentile among CPUs with an average score of 32697, nearly identical to its nearest rivals, while the combo ranks only 2325th of 2902. The steep FPS drops with resolution scaling further confirm GPU limitation.
Q: What is the playable settings configuration for 60 FPS?
A: The only measured configuration that reaches or exceeds 60 FPS is 1080p Low at 81 FPS and 1080p Medium at 61 FPS. 1440p Low exactly hits 60 FPS, but any higher preset or resolution falls below this target.
Q: How much does the 4K Ultra preset cost in performance?
A: The 4K Ultra preset averages 18 FPS, which is a 77.8% reduction from the 1080p Low result of 81 FPS. It is also 50% lower than the 4K Low result of 40 FPS, showing the combined penalty of resolution and settings.
Q: Does the 8 GB VRAM affect performance at higher resolutions?
A: The data strongly suggests yes. The 4K results show a disproportionate drop (25 FPS at High, 18 FPS at Ultra) compared to 1080p, consistent with VRAM capacity or bandwidth saturation on the 128-bit bus with 320.0 GB/s bandwidth.
CPU Role
The Intel Core Ultra 7 155H is a 16-core, 22-thread mobile processor based on the Meteor Lake architecture, built on Intel's 7 nm process. It features a base clock of 3.80 GHz and a boost clock of 4.80 GHz, with a 28 W TDP, and its cache hierarchy includes 112 KB of L1 per core, 2 MB of L2 per core, and 24 MB of shared L3 cache. The CPU's benchmark results are strong: a Cinebench R23 multi-core score of 15028 and single-core score of 1743, with a Passmark multi-thread score of 24873 and single-thread score of 3468. These numbers place it at the 83rd percentile against all CPUs, with an average benchmark score of 32697.
In Red Dead Redemption 2, the CPU's role appears to be secondary to the GPU, given the resolution scaling patterns. The fact that FPS drops by roughly 25-33% per resolution step, regardless of preset, indicates the CPU is not introducing a bottleneck — if it were, the frame rates would plateau or degrade less predictably. The nearest CPU rivals (Intel Core i5-14600T at 32707, AMD Ryzen AI 7 PRO 360 at 32662, AMD Ryzen 5 7400F at 32750) all score within 0.2% of the 155H, yet the combo's rank of 2325 out of 2902 suggests that even a significantly faster CPU would not improve the frame rates meaningfully, since the GPU is already the limiting component.
The CPU's 22 threads are more than sufficient for this game's multi-threaded workload, and its 24 MB of L3 cache provides ample headroom for open-world streaming. The Passmark data compression score of 277353 and integer math score of 86870 indicate strong general-purpose performance, but these do not translate into higher FPS in this GPU-bound scenario. The 4.80 GHz boost clock ensures that single-threaded game logic is handled without stutter, and the measured FPS data shows no evidence of CPU-induced frame pacing issues — the minimum FPS values (51 FPS at 1080p Medium, 38 FPS at 1440p Medium, 25 FPS at 4K Medium) are consistent with GPU-bound behavior rather than CPU spikes.
Settings Recommendations
Based on the measured FPS data, the optimal settings configuration depends on the user's resolution and frame rate priorities. For 1080p, the Medium preset offers the best balance: 61 FPS average with a minimum of 51 FPS and maximum of 70 FPS, providing a smooth experience while retaining more visual fidelity than Low's 81 FPS. The High preset at 51 FPS is also viable for users who prioritize image quality over a 60 FPS target, but the 10 FPS penalty from Medium may not justify the visual gains. The Ultra preset at 36 FPS is only recommended for users who value maximum detail over playability, as it falls below the 60 FPS threshold.
At 1440p, the Low preset is the only configuration that achieves 60 FPS, making it the recommended choice for smooth gameplay. The Medium preset at 45 FPS (minimum 38, maximum 52) is a reasonable compromise for users who can tolerate sub-60 FPS, but the High preset at 38 FPS and Ultra at 27 FPS are not recommended for action-heavy sequences. For 4K, the data shows that no preset achieves even 45 FPS — Low is 40 FPS, Medium is 30 FPS, High is 25 FPS, and Ultra is 18 FPS — so users should either drop to 1440p or accept a significantly reduced frame rate. The 4K Medium preset's 30 FPS average with a 25 FPS minimum is the only 4K option that stays above the 24 FPS cinematic floor, but gameplay may feel sluggish.
The best overall experience per the measured rows is 1080p Medium, which delivers 61 FPS with a tight 19 FPS variance between minimum and maximum, ensuring consistent performance during intense scenes. For users with 1440p displays, the Low preset at 60 FPS is the only way to hit the 60 FPS target, while 4K should be avoided unless the user prioritizes resolution over frame rate and can tolerate the 18-40 FPS range. The data clearly shows that this combo is best suited to 1080p gaming, where it can leverage the CPU's strong single-thread performance and the GPU's 13.17 TFLOPS to deliver a playable experience across all presets.
Hardware Specifications
Intel Core Ultra 7 155H
NVIDIA GeForce RTX 5050
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 155H + NVIDIA GeForce RTX 5050 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Ultra | 50.0 |
| 3840x2160 | High | 69.0 |
| 3840x2160 | Medium | 84.0 |
| 3840x2160 | Low | 110.0 |
| 2560x1440 | Ultra | 77.0 |
| 2560x1440 | High | 105.0 |
| 2560x1440 | Medium | 125.0 |
| 2560x1440 | Low | 168.0 |
| 1920x1080 | Ultra | 101.0 |
| 1920x1080 | High | 140.0 |
| 1920x1080 | Medium | 168.0 |
| 1920x1080 | Low | 222.0 |
Red Dead Redemption 2 with iUltra 7 155H + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RTX 5050 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with iUltra 7 155H + RTX 5050
Explore FPS benchmarks for other games using this same hardware combination.