Red Dead Redemption 2
This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 9 | 13 | 14 | 20 |
| 1440p QHD | 15 | 23 | 23 | 32 |
| 1080p Full HD | 23 | 29 | 31 | 42 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-9400 + NVIDIA GeForce GTX 1650, In-Depth Analysis
Red Dead Redemption 2 is a demanding title, and the combination of the Intel Core i5-9400 with the NVIDIA GeForce GTX 1650 places this system firmly in entry-level territory for this specific game. The benchmark data shows a configuration that is heavily constrained by the graphics card, struggling to maintain playable frame rates at higher resolutions. This analysis breaks down the measured performance across various settings, offering a clear picture of what to expect from this hardware pairing.
Resolution Scaling
The frame rate data reveals a predictable but steep decline as resolution increases, confirming that the GTX 1650 is the primary bottleneck in this system. At 1080p with Low settings, the combo achieves an average of 41.6 FPS. Moving to 1440p at the same Low settings drops the average to 31.8 FPS, a reduction of roughly 24%. Pushing further to 4K at Low settings yields just 20.4 FPS, which is less than half the 1080p performance. This scaling pattern is characteristic of a GPU that is running out of pixel throughput and memory bandwidth at higher resolutions.
The situation becomes more severe with increased graphical fidelity. At 1080p High settings, the system manages 29.3 FPS, but this falls to 22.7 FPS at 1440p and plummets to 13.1 FPS at 4K. The gap between Low and High settings at the same resolution is also significant, highlighting that the GPU is not just limited by resolution but also by the complexity of the shaders and effects. For instance, at 4K, the difference between Low (20.4 FPS) and Ultra (8.7 FPS) is a stark 11.7 FPS, underscoring that the graphics card cannot handle the load of high-fidelity rendering at this pixel count. The data indicates that the CPU is not the limiting factor in these scenarios; the consistent frame rate drops with each resolution increase point squarely at the GPU as the component being overwhelmed.
Settings Recommendations
Given the measured results, achieving a smooth experience in Red Dead Redemption 2 with this hardware requires a pragmatic approach to settings. The data shows that the Low preset is the only one that comes close to providing a consistently playable frame rate, and even then, only at 1080p. The 41.6 FPS average at 1080p Low is the highest score in the entire dataset, making it the baseline for acceptable performance. While not hitting a solid 60 FPS, it is the most responsive configuration available.
For those who prioritize visual quality over frame rate, the Medium preset at 1080p offers a compromise, yielding an average of 30.6 FPS. This is a marginal 1.3 FPS improvement over the High preset (29.3 FPS) and suggests that the step from Medium to High offers little performance benefit for the potential increase in visual fidelity. However, it is still a playable, albeit not smooth, experience. The High and Ultra presets should be avoided at any resolution above 1080p, as the frame rates drop into the low 20s and teens. The Ultra preset is effectively unplayable, with scores ranging from 22.5 FPS at 1080p down to a dismal 8.7 FPS at 4K. The practical advice is to stick with 1080p and Low settings for the best balance, or 1080p Medium if you can tolerate lower frame rates for better visuals. Higher resolutions are simply not viable for this combination.
FAQ
Q: Can this system run Red Dead Redemption 2 at 4K resolution?
A: Technically yes, but the experience will be extremely poor. The data shows the highest average frame rate at 4K is just 20.4 FPS with Low settings, which drops to 8.7 FPS on Ultra. This is far below what is considered playable for a smooth experience.
Q: What is the best settings preset for this hardware?
A: Based on the measured FPS, the Low preset at 1920x1080 gives the highest average frame rate at 41.6 FPS. If you prefer better visuals, the Medium preset at 1080p offers a 30.6 FPS average, but High and Ultra presets will push the system into the 20s or lower.
Q: How does the GTX 1650's performance compare to its nearest rivals?
A: The GPU's benchmark data shows it is very closely matched with its nearest rivals. It scores within 0.5% of the AMD Radeon Pro WX 5100 and is 0.4% behind both the NVIDIA GeForce RTX 3050 A Mobile and the AMD Radeon 550X. Its average benchmark score is 8713, placing it in the 43rd percentile of all GPUs.
Q: Is the Intel Core i5-9400 a bottleneck for the GTX 1650 in this game?
A: The benchmark results indicate that the GPU is the primary bottleneck. The frame rates drop dramatically as resolution and settings increase, which is a classic sign of GPU limitation. The CPU has 6 cores and 6 threads with a boost clock of 4.10 GHz, which is sufficient to feed the GTX 1650 in most scenarios.
Q: What is the overall ranking of this CPU and GPU combo for this game?
A: This specific combination ranks 1651 out of 1687 tested combos for Red Dead Redemption 2. This places it in the bottom 2% of systems, indicating that it is a low-performing configuration for this particular title.
Q: What is the difference in performance between Ultra and Low settings at 1080p?
A: At 1920x1080, the Ultra preset produces an average of 22.5 FPS, while the Low preset produces 41.6 FPS. This is a difference of 19.1 FPS, showing that the Ultra preset demands significantly more from the GPU, which it cannot deliver.
How This Combo Ranks
In the grand scheme of tested hardware configurations for Red Dead Redemption 2, this system performs in the bottom tier. With a combo rank of 1651 out of 1687, it sits in the 2nd percentile, meaning nearly all other tested combinations deliver higher frame rates. This low ranking is a direct result of the GTX 1650's modest performance capabilities, which are insufficient for the heavy demands of this game. The CPU, while not a high-end part, is not the primary cause of this low ranking; the GPU is the clear limiting factor.
The data suggests that any meaningful upgrade to the graphics card would yield a substantial improvement in performance, as the CPU has enough headroom to support a more powerful GPU. The 6-core, 6-thread configuration of the i5-9400 is adequate for modern gaming, but the GTX 1650's 4 GB of VRAM and limited compute power hold the system back. This pairing is at the absolute entry point for playing this game, and the ranking accurately reflects that it is not a recommended configuration for a smooth experience. For context, the GPU sits in the 43rd percentile of all GPUs, and the CPU in the 50th percentile, but their combined performance in this specific title is far below average.
CPU Role
The Intel Core i5-9400 is a 6-core, 6-thread processor based on the Coffee Lake architecture. It has a base clock of 2.90 GHz and a boost clock of 4.10 GHz, which provides adequate single-threaded performance for gaming. Its benchmark scores, such as 7969 in Cinebench R23 multi-core and 1125 in single-core, place it in the 50th percentile of all CPUs, indicating it is a solid mid-range processor. For Red Dead Redemption 2, the CPU's role is to feed the GPU with draw calls and game logic.
The performance data suggests that the CPU is not the primary bottleneck in this configuration. If the CPU were the limiting factor, we would expect to see frame rates that remain relatively constant across different resolutions, since the CPU workload doesn't change much with resolution. Instead, the data shows a clear and significant drop in FPS as resolution increases, which is the signature of a GPU bottleneck. The CPU is likely keeping up with the GTX 1650's demands, but it is also not providing enough headroom to push higher frame rates. Its nearest rivals, such as the Intel Core i3-10305 and the Intel Core i7-8809G, have nearly identical average benchmark scores, showing that the i5-9400 is an average performer in its class.
Measured FPS Breakdown
The measured frame rate data provides a detailed look at performance across all settings and resolutions. At 1920x1080, the system is most capable. The Low preset delivers the best average at 41.6 FPS. The Medium and High presets are close, with averages of 30.6 FPS and 29.3 FPS, respectively. The Ultra preset is the worst at 1080p, with an average of 22.5 FPS.
At 2560x1440, performance becomes more constrained. The Low preset is the only one to break 30 FPS, achieving an average of 31.8 FPS. The Medium and High presets are nearly identical, with averages of 22.6 FPS and 22.7 FPS. The Ultra preset drops to 14.7 FPS, making it difficult to play.
At 3840x2160, the hardware is clearly overwhelmed. The Low preset achieves an average of 20.4 FPS, which is the only playable option, albeit barely. The Medium preset drops to 14.2 FPS, while High falls to 13.1 FPS. The Ultra preset is nearly unplayable at 8.7 FPS. These numbers confirm that the GTX 1650 is not suited for 4K gaming in this title, and even 1440p requires significant compromises in visual quality.
Hardware Specifications
Intel Core i5-9400
NVIDIA GeForce GTX 1650
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-9400 + NVIDIA GeForce GTX 1650 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 20.4 |
| 3840x2160 | Medium | 14.2 |
| 3840x2160 | High | 13.1 |
| 3840x2160 | Ultra | 8.7 |
| 2560x1440 | Low | 31.8 |
| 2560x1440 | High | 22.7 |
| 2560x1440 | Medium | 22.6 |
| 2560x1440 | Ultra | 14.7 |
| 1920x1080 | Low | 41.6 |
| 1920x1080 | Medium | 30.6 |
| 1920x1080 | High | 29.3 |
| 1920x1080 | Ultra | 22.5 |
Red Dead Redemption 2 with ii5-9400 + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Other Games with ii5-9400 + GTX 1650
Explore FPS benchmarks for other games using this same hardware combination.