Red Dead Redemption 2

Red Dead Redemption 2 presents a demanding workload that scales heavily with both resolution and graphics presets, and the AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070 combination shows a clear pattern of GPU-bound performance at higher settings. The measured data indicates that this pairing is capable of delivering smooth gameplay at 1080p, but requires careful settings management to maintain playable frame rates at higher resolutions. The benchmark results show that the RTX 3070's 8 GB of GDDR6 memory and the Ryzen 5 7600X's six-core architecture interact in ways that define the overall experience across the tested matrix of resolutions and quality levels.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 reveals a steep performance curve that is characteristic of a GPU-limited scenario at higher resolutions. At the "High" preset, the average frame rate drops from 76.3 FPS at 1080p to 58.2 FPS at 1440p, representing a 23.7% decrease, and then falls further to 38.9 FPS at 4K, a 33.2% drop from the 1440p figure. This scaling pattern indicates that the rendering load at 4K is substantially heavier, and the RTX 3070 begins to struggle to maintain fluid motion. The data shows that the gap between 1080p and 1440p is less severe than the gap between 1440p and 4K, suggesting that the GPU's compute and memory bandwidth are being pushed closer to their limits as pixel count increases.

At the "Low" preset, the scaling is more linear but still shows significant degradation. The average frame rate goes from 122.6 FPS at 1080p to 91.1 FPS at 1440p, a 25.7% reduction, and then to 61.3 FPS at 4K, a 32.7% reduction. The fact that even at "Low" settings the 4K frame rate barely exceeds 60 FPS suggests that the resolution itself is a primary bottleneck, rather than the graphical features. The "Medium" preset follows a similar trajectory, with 96.6 FPS at 1080p, 68.1 FPS at 1440p, and 43.3 FPS at 4K, showing that each increase in resolution exacts a toll that is largely independent of the preset chosen. This data indicates that the 7600X is not the limiting factor in most scenarios; the RTX 3070's raw throughput is what governs the frame rate at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 3070 is the dominant component in this pairing, and its specifications directly correlate with the observed performance. With 8 GB of GDDR6 memory on a 256-bit bus, the card provides a memory bandwidth of 448.0 GB/s, which is ample for 1080p and 1440p but becomes strained at 4K with higher presets. The card's boost clock of 1725 MHz and base clock of 1500 MHz, combined with its 5888 shading units, deliver a measured FP32 performance of 20.31 TFLOPS, which explains the strong showing at lower resolutions. However, the data shows that the "Ultra" preset at 4K yields only 25.7 FPS, a figure that points to the GPU's limits in handling the combined load of high pixel count and maximum visual fidelity. The 46 RT cores and 184 tensor cores are present in the architecture but do not appear to provide any specific advantage in this non-ray-traced workload, as the frame rates are consistent with traditional rasterization performance.

The GPU's 220 W TDP and the fact that it is positioned at the 72nd percentile among all GPUs in the benchmark database indicate that it is a mid-to-high-tier card. The nearest rival data shows it is within 1% of the AMD Radeon RX 6600 XT and 1% ahead of the NVIDIA GeForce GTX 980 Ti, which helps contextualize its performance tier. The memory size of 8 GB is a notable factor in this game, as the "Ultra" preset at 4K likely exceeds the comfortable VRAM allocation, leading to the steep drop from 38.9 FPS at "High" to 25.7 FPS at "Ultra". This suggests that the card's memory capacity, rather than its compute power, is the primary constraint at the highest settings, and users should be aware of this limitation when configuring the game.

How This Combo Ranks

In the grand scheme of tested combinations, the AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 3070 achieves a rank of 790 out of 1687 combos in Red Dead Redemption 2. This places the pairing in the upper-middle tier of all tested systems, indicating that it is a competent but not top-tier configuration for this specific title. The rank reflects the balance between the CPU and GPU, where the 7600X's strong single-thread performance, as evidenced by its PassMark single-thread score of 4135, is sufficient to feed the RTX 3070 without creating a significant bottleneck. The CPU's percentile of 83 among all CPUs reinforces that it is a strong processor, but the combined rank suggests that the GPU is the more limiting factor in this game.

The data shows that this combo outperforms many others, but it does not reach the top echelon, which is typically reserved for high-end GPUs with more VRAM and higher compute throughput. The rank of 790 indicates that there are 897 combos that perform better, likely featuring more powerful GPUs or newer architectures. The 7600X's 6 cores and 12 threads, with a boost clock of 5.30 GHz, provide ample processing power for the game's simulation and AI tasks, but the overall frame rate is dictated by the RTX 3070's ability to render frames. This positioning means that users with this combo can expect a solid experience at 1080p and 1440p, but they should temper expectations for 4K gaming, where the combo's rank falls behind many others due to the GPU's limitations.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. For 1920x1080, the "High" preset delivers a solid 76.3 FPS, which is well above the 60 FPS threshold for smooth gameplay, and the "Medium" preset at 96.6 FPS offers a smoother experience with only a modest visual compromise. The "Ultra" preset at 56.6 FPS is playable but dips below 60 FPS, so it is not recommended for competitive or fast-paced scenarios. The "Low" preset at 122.6 FPS is excellent for high-refresh-rate monitors, but the visual quality reduction may be too severe for some players. The data indicates that "High" is the best balance of visual fidelity and performance at 1080p, as it maintains a comfortable frame rate without sacrificing much detail.

At 2560x1440, the "High" preset yields 58.2 FPS, which is just below the 60 FPS target, while "Medium" at 68.1 FPS provides a safer margin. The "Low" preset at 91.1 FPS is the only option that comfortably exceeds 60 FPS, but it does so at the cost of significant visual detail. For a consistent experience, "Medium" is the recommended setting at 1440p, as it offers a playable frame rate with acceptable visual quality. At 3840x2160, the situation is more constrained. The "Low" preset at 61.3 FPS is the only playable option, while "High" at 38.9 FPS and "Medium" at 43.3 FPS are both below the 60 FPS threshold and may feel sluggish. The "Ultra" preset at 25.7 FPS is not viable for active gameplay. Therefore, for 4K, users should either select "Low" or consider lowering the resolution, as the data clearly shows that the RTX 3070 cannot handle higher presets at this resolution.

Measured FPS Breakdown

The complete set of measured results provides a detailed picture of the combo's performance across all tested configurations. At 1920x1080, the average frame rates are as follows: "Low" achieves 122.6 FPS, "Medium" achieves 96.6 FPS, "High" achieves 76.3 FPS, and "Ultra" achieves 56.6 FPS. This represents a performance spread of 66.0 FPS between the lowest and highest presets, showing the significant impact of graphical settings on frame rate at this resolution. The scaling from "Low" to "Ultra" is roughly linear, with each step up in quality costing approximately 20 FPS, which indicates that the GPU has headroom at 1080p and is not fully saturated until the "Ultra" preset is applied.

At 2560x1440, the average frame rates are 91.1 FPS for "Low", 68.1 FPS for "Medium", 58.2 FPS for "High", and 42.1 FPS for "Ultra". The drop from "Low" to "Ultra" is 49.0 FPS, and the relative performance degradation from 1080p to 1440p is consistent across presets, averaging around 25% reduction. This suggests that the GPU is still managing the load reasonably well at 1440p, but the "Ultra" preset is clearly pushing the limits, as it falls below the 45 FPS mark. At 3840x2160, the average frame rates are 61.3 FPS for "Low", 43.3 FPS for "Medium", 38.9 FPS for "High", and 25.7 FPS for "Ultra". The gap between "Low" and "Ultra" is 35.6 FPS, and the "Ultra" preset is nearly unplayable. The data shows that the jump from 1440p to 4K causes a further 30-40% reduction in performance across all presets, confirming that the RTX 3070 is the primary bottleneck at this resolution. The overall pattern is clear: this combo excels at 1080p with any preset, performs adequately at 1440p with medium-to-high settings, and is only suitable for 4K with the lowest quality settings.