Ready Or Not
This combination provides smooth gameplay with an average of 108 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 55 | 60 | 67 |
| 1440p QHD | 70 | 101 | 115 | 128 |
| 1080p Full HD | 116 | 162 | 181 | 208 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i7-14700KF + AMD Radeon RX 6600, In-Depth Analysis
Ready Or Not is a demanding tactical shooter that punishes both CPU and GPU equally, and the pairing of the Intel Core i7-14700KF with the AMD Radeon RX 6600 creates a fascinating bottleneck dynamic. The data shows that this combination delivers a playable experience at 1080p and 1440p, but struggles to maintain high frame rates at 4K, particularly when graphical presets are maxed out. This analysis breaks down the measured performance, what it means for your build, and how to optimize settings for the best experience.
Resolution Scaling
The performance drop from 1080p to 4K in Ready Or Not is steep, and the pattern of these drops reveals exactly where the system's limits lie. At 1080p with High settings, the combo produces 162.2 FPS, which drops to 101.2 FPS at 1440p, and then plummets to 55.1 FPS at 4K. That is a 37.6% reduction in frame rate from 1080p to 1440p, followed by a massive 45.6% reduction from 1440p to 4K. This scaling curve is characteristic of a GPU-bound scenario at higher resolutions, where the Radeon RX 6600's 8 GB of VRAM and 128-bit memory bus become the limiting factors.
The story changes dramatically when looking at the Low preset. At 1080p Low, the system achieves 207.8 FPS, which only drops to 127.9 FPS at 1440p and 66.7 FPS at 4K. The percentage drops are similar, but the absolute numbers indicate that even at 4K Low, the system is far more capable than at 4K High. The most telling data point is the gap between presets at the same resolution. At 4K, the difference between Low and High is 11.6 FPS, while at 1080p that same gap is 45.6 FPS. This suggests that at 4K, the GPU is so saturated that lowering settings yields diminishing returns, confirming that the RX 6600 is the primary bottleneck at high resolution. The CPU, with its 20 cores and 28 threads, is clearly not the limiting factor here, as the frame rate scales almost entirely with GPU workload.
How This Combo Ranks
In the grand scheme of tested hardware combinations, this pairing sits at rank 1417 out of 1748 combos for Ready Or Not. That places it in the bottom 19% of all tested systems, which is a sobering statistic for a CPU that is in the 96th percentile of all processors. The data indicates that the CPU's raw horsepower is being wasted in this pairing, as the GPU holds the system back from achieving higher rankings.
The CPU itself benchmarks very close to its direct rivals. The Intel Core i7-14700KF has an average benchmark score of 70104, which is essentially tied with the Intel Core i7-14700K at 70074 (a 0% delta) and the AMD Ryzen 9 9950X at 70420 (a -0.4% delta). This means that in terms of raw processing power, this CPU is among the best available. However, the GPU's average benchmark score of 25235 places it in the 69th percentile of all GPUs, and it is virtually tied with the AMD Radeon 890M (25246, 0% delta) and the AMD Radeon RX 580 2048SP (25287, -0.2% delta). This is a mid-range GPU being paired with a top-tier CPU, and the combo rank reflects this mismatch. The system is capable, but it is not competitive with high-end GPU pairings in this specific game.
CPU Role
The Intel Core i7-14700KF is a 20-core, 28-thread processor from the Raptor Lake Refresh generation, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. It has a large 33 MB shared L3 cache and supports both DDR4 and DDR5 memory. In synthetic benchmarks, it scores 44557 in Cinebench R23 multi-core and 6290 in single-core, along with a Geekbench multi-core score of 19287 and a single-core score of 2972. These are exceptional numbers, placing the chip in the 96th percentile of all CPUs.
For Ready Or Not, the CPU's role is to feed the GPU with draw calls and manage the game's AI and physics simulations. The data shows that the CPU is not the bottleneck in this system. At 1080p Low, the system hits 207.8 FPS, which is a very high frame rate that most CPUs would struggle to maintain. The fact that the CPU can push past 200 FPS in this scenario indicates that it has ample headroom. The bottleneck shifts entirely to the GPU as resolution increases, and the CPU's high core count and clock speeds ensure that it never holds back the RX 6600. The measured data shows that the CPU is more than capable of handling this tactical shooter, and any frame rate limitations are directly attributable to the GPU's performance ceiling.
Measured FPS Breakdown
At 1080p, the system is highly playable across all presets. Low settings produce 207.8 FPS, Medium yields 180.9 FPS, High delivers 162.2 FPS, and even Ultra maintains a solid 115.8 FPS. This demonstrates that at 1080p, the RX 6600 has enough bandwidth and processing power to handle the game's demands, and the CPU easily keeps up.
Moving to 1440p, the frame rates drop but remain respectable. Low settings produce 127.9 FPS, Medium drops to 114.9 FPS, High falls to 101.2 FPS, and Ultra manages 70 FPS. The gap between Low and Medium is 13 FPS, while the gap between Medium and High is 13.7 FPS, and the gap between High and Ultra is a larger 31.2 FPS. This suggests that the Ultra preset introduces a significant additional GPU workload that the RX 6600 cannot handle as efficiently.
At 4K, the system struggles. Low settings yield 66.7 FPS, Medium produces 60.3 FPS, High drops to 55.1 FPS, and Ultra falls to a barely playable 36.8 FPS. The difference between each preset at this resolution is smaller, with only a 5.2 FPS gap between Low and Medium, and a 5.2 FPS gap between Medium and High. The jump to Ultra, however, is a substantial 18.3 FPS drop, indicating that the Ultra preset's additional effects and shadow detail are too much for the 8 GB frame buffer to handle without significant performance degradation.
GPU Role
The AMD Radeon RX 6600 is a RDNA 2.0 architecture GPU built on the 7 nm process, featuring 1792 shading units, 112 TMUs, and 64 ROPs. It has 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. The GPU has a base clock of 1626 MHz and a boost clock of 2491 MHz, with a game clock of 2044 MHz. It supports DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6, making it fully compatible with Ready Or Not's modern rendering requirements.
The GPU's performance in synthetic benchmarks shows a 3DMark Steel Nomad DX12 score of 1492 and a Passmark G3D score of 15096. These numbers place it in the 69th percentile of all GPUs, which is decent for 1080p gaming but insufficient for high-refresh 4K. In Ready Or Not, the GPU's role is to handle the game's lighting, shadows, and texture rendering. The data shows that the RX 6600's 8 GB of VRAM is a critical limitation at 4K Ultra, where the frame rate drops to 36.8 FPS. The 128-bit memory bus also limits the GPU's ability to handle high-resolution textures efficiently, which is why the performance gap between High and Ultra at 1440p is so pronounced. The GPU is clearly the bottleneck in this system, and its performance characteristics dictate the overall frame rates at all resolutions above 1080p.
Settings Recommendations
For the best balance of visual fidelity and performance, the data suggests that Medium settings at 1440p provide the optimal experience. At this configuration, the system achieves 114.9 FPS, which is smooth and responsive, while still maintaining a reasonable level of visual detail. The 1440p Medium preset is 13.7 FPS faster than High settings and only 13 FPS slower than Low, making it the sweet spot for this hardware.
If you are gaming at 1080p, High settings at 162.2 FPS are the recommended choice. This provides a significant visual upgrade over Medium (which runs at 180.9 FPS) while still maintaining a frame rate that is well above 144 Hz for high-refresh monitors. The Ultra preset at 1080p yields 115.8 FPS, which is playable, but the 46.4 FPS penalty compared to High is not worth the marginal visual gains.
At 4K, the system is only viable on Low settings, which produce 66.7 FPS. Medium settings drop to 60.3 FPS, which is borderline, and High settings fall to 55.1 FPS, which may feel sluggish in a tactical shooter where precision is key. The Ultra preset at 36.8 FPS should be avoided entirely, as it falls below playable thresholds. For 4K users, the recommendation is to stick with Low or Medium settings, and to accept that this GPU is not designed for high-detail 4K gaming. The data clearly indicates that the RX 6600 is best utilized at 1080p and 1440p, where it can leverage its full potential without being overwhelmed by the pixel count.
Hardware Specifications
Intel Core i7-14700KF
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700KF + AMD Radeon RX 6600 in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 66.7 |
| 3840x2160 | Medium | 60.3 |
| 3840x2160 | High | 55.1 |
| 3840x2160 | Ultra | 36.8 |
| 2560x1440 | Low | 127.9 |
| 2560x1440 | Medium | 114.9 |
| 2560x1440 | High | 101.2 |
| 2560x1440 | Ultra | 70.0 |
| 1920x1080 | Low | 207.8 |
| 1920x1080 | Medium | 180.9 |
| 1920x1080 | High | 162.2 |
| 1920x1080 | Ultra | 115.8 |
Ready Or Not with ii7-14700KF + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RX 6600 + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii7-14700KF + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.