Ready Or Not

The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 3080 delivers a strong performance profile for Ready Or Not, with measured data showing the combo ranks in the 559th position out of 1748 tested combinations. The data indicates the CPU is operating near the top of its class, sitting in the 96th percentile of all processors, which helps push frame rates to very high levels even at demanding resolutions.

FAQ

Q: What is the highest average frame rate recorded for this combination?

A: The highest recorded average FPS is 354.9, achieved at 1920x1080 resolution with Low settings.

Q: How does the RTX 3080 compare to its nearest rival, the AMD Radeon RX 7900 GRE?

A: The RTX 3080 trails the RX 7900 GRE by 0.9% in average benchmark score, placing the two cards in a near-identical performance tier.

Q: What is the lowest average frame rate experienced with this setup?

A: The lowest average is 63.8 FPS, which occurs at 3840x2160 resolution with Ultra settings.

Q: Is the Intel Core i7-14700K faster than the AMD Ryzen 9 9950X?

A: The i7-14700K posts an average benchmark score of 70074, which is 0.5% higher than the Ryzen 9 9950X's 70420 score, indicating a slight edge for the Intel chip.

Q: Does the combo rank in the top half of tested configurations?

A: Yes, the combination ranks 559th out of 1748 total combos, placing it comfortably in the upper third of all tested setups.

Q: What is the difference in FPS between Low and Ultra settings at 1440p?

A: At 2560x1440, the average FPS drops from 221.3 on Low to 124.1 on Ultra, a difference of 97.2 frames per second.

GPU Role

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture with a GA102 chip manufactured on an 8 nm process at Samsung. It carries 10 GB of GDDR6X memory across a 320-bit bus, yielding 760.3 GB/s of bandwidth. The memory clock runs at 1188 MHz, translating to 19 Gbps effective speed, which feeds the card's 8704 shading units and 68 RT cores.

In Ready Or Not, the GPU's memory capacity and bandwidth directly influence how the game handles textures and effects at higher resolutions. Benchmark results show this card holds up well: at 1080p High settings, it produces 278.3 FPS average, and even at 4K High it manages 91 FPS. The card's FP32 performance of 29.77 TFLOPS and texture rate of 465.1 GTexel/s suggest it can process the game's geometry and lighting without bottlenecking the CPU in most scenarios.

The RTX 3080's percentile ranking of 80 among all GPUs positions it as a solid mainstream-to-high-end performer. Its nearest rival, the AMD Radeon 880M, is only 0.4% behind, while the RTX 5070 Ti Mobile trails by 1%. This tight grouping indicates the 3080 remains competitive in the current landscape, though it sits behind the RX 7900 GRE by a slim 0.9% margin.

CPU Role

The Intel Core i7-14700K uses the Raptor Lake-R architecture with 20 cores and 28 threads, running at a base clock of 3.40 GHz and boosting up to 5.60 GHz. The processor includes 33 MB of shared L3 cache and 2 MB per core of L2 cache, along with 80 KB of L1 per core. Its memory support spans both DDR4 and DDR5 via a dual-channel bus, and it connects through Gen 5 PCIe with 16 CPU lanes.

Benchmark data shows the CPU excels in multi-threaded tasks, scoring 44534 in Cinebench R23 multi-core and 18704 in R20 multi-core. Single-core performance is equally strong, with a Cinebench R23 single-core score of 6287 and a Geekbench single-core score of 2932. These numbers place the i7-14700K in the 96th percentile of all CPUs, with an average benchmark score of 70074.

In gameplay, this CPU muscle prevents frame drops in CPU-bound scenarios. The data shows that at 1080p Low settings, where the GPU is less stressed, the CPU pushes the average to 354.9 FPS. The processor's nearest rival, the Intel Core i7-14700KF, scores 70104, a negligible 0% difference, while the AMD EPYC 9115 is 0.3% behind. This indicates the i7-14700K is well-matched to the RTX 3080, providing enough headroom to keep the GPU as the primary limiter in most situations.

Measured FPS Breakdown

At 1920x1080, the average frame rates are consistently high across all settings. Low settings produce 354.9 FPS, Medium yields 309.5 FPS, High drops to 278.3 FPS, and Ultra settles at 198 FPS. The scaling from Low to Ultra represents a 156.9 FPS decrease, showing that the game's ultra preset places significant load on the hardware.

Moving to 2560x1440, the averages remain strong but begin to show the GPU's influence. Low settings deliver 221.3 FPS, Medium achieves 192.5 FPS, High holds at 176 FPS, and Ultra drops to 124.1 FPS. The gap from Low to Ultra here is 97.2 FPS, proportionally smaller than at 1080p, suggesting the CPU is still providing ample support.

At 3840x2160, the RTX 3080's 10 GB VRAM and bandwidth become more critical. Low settings yield 117.3 FPS, Medium produces 99.4 FPS, High reaches 91 FPS, and Ultra falls to 63.8 FPS. The difference from Low to Ultra is 53.5 FPS, indicating that the GPU is now the dominant bottleneck, as the CPU's high single-thread performance can no longer compensate for the increased pixel workload.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals how the workload shifts between CPU and GPU. At High settings, the average drops from 278.3 FPS at 1080p to 176 FPS at 1440p, a 36.7% reduction, and then to 91 FPS at 4K, another 48.3% drop. This consistent decline points to the GPU becoming the primary limiter as resolution increases, since the CPU's performance headroom is not fully taxed at higher pixel counts.

Low settings show a similar pattern: 354.9 FPS at 1080p falls to 221.3 FPS at 1440p (37.7% decrease) and then to 117.3 FPS at 4K (47% decrease). The CPU's role is most evident at 1080p Low, where the frame rate exceeds 350 FPS, a level that only a top-tier processor like the i7-14700K can support. At 4K, however, the GPU's limits are clear, with even Low settings dropping below 120 FPS.

The scaling analysis indicates that at 1080p, the setup is balanced with the CPU able to feed the GPU efficiently. At 1440p, the balance starts to tip toward the GPU, and at 4K, the RTX 3080 is clearly the limiting component. This is typical for a high-end CPU paired with a mid-to-high-end GPU, where the GPU's pixel throughput becomes the deciding factor at higher resolutions.

Settings Recommendations

For players prioritizing maximum frame rates, Low settings at 1080p provide 354.9 FPS, which is far beyond what most displays can show, making this preset unnecessary for competitive play but useful for benchmarking. Medium settings at 1080p still deliver 309.5 FPS, offering a better balance of visual quality and speed without sacrificing much performance.

At 1440p, High settings produce 176 FPS, which is ideal for high-refresh-rate monitors (144Hz or above). This preset preserves visual fidelity while maintaining a comfortable margin above 144 FPS. Ultra settings at 1440p drop to 124.1 FPS, which is still playable but may cause noticeable stutters on 144Hz displays, so High is the recommended choice for this resolution.

For 4K gaming, the data shows that High settings yield 91 FPS, which is excellent for a 4K display with a 60Hz refresh rate. Medium settings at 99.4 FPS offer a slight performance boost, but the visual difference between Medium and High is often worth the 8.4 FPS trade-off. Ultra settings at 4K drop to 63.8 FPS, which is close to the 60 FPS threshold but leaves little headroom for demanding scenes, so High is the optimal preset for a smooth 4K experience.