Ready Or Not
This combination provides smooth gameplay with an average of 118 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 58 | 65 | 71 |
| 1440p QHD | 77 | 112 | 126 | 141 |
| 1080p Full HD | 127 | 177 | 197 | 227 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i7-13700K + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 3060 Ti produces a distinctive performance curve in Ready Or Not, one that clearly separates the capabilities of the processor from the graphics card across the three tested resolutions. The data shows a system that can deliver very high frame rates at 1080p but begins to exhibit the expected constraints of the GPU as pixel count increases.
Resolution Scaling
The measured frame rates reveal a predictable but steep drop as resolution climbs from 1920x1080 to 3840x2160. At the High preset, the average frame rate falls from 177.0 FPS at 1080p to 112.1 FPS at 1440p, then down to 58.2 FPS at 4K. This represents a reduction of roughly 37% when moving from 1080p to 1440p, and a further 48% drop when stepping up to 4K. The scaling pattern indicates that the RTX 3060 Ti is the primary limiting factor at higher resolutions, as the workload becomes increasingly pixel-bound rather than geometry-bound.
The Low preset shows the most dramatic scaling behavior. At 1080p, the combo achieves 227.2 FPS, which drops to 140.8 FPS at 1440p and 71.4 FPS at 4K. The delta between Low and High settings at 4K is substantial — 71.4 FPS versus 58.2 FPS — suggesting that even at the lowest settings, the GPU cannot maintain the frame rates seen at lower resolutions. This is consistent with a GPU that is being pushed to its memory bandwidth and shader limits, as the 8 GB of GDDR6 memory and 448.0 GB/s bandwidth handle the 4K framebuffer with less headroom.
Ultra settings amplify the resolution scaling effect. The 4K Ultra average of 38.6 FPS is nearly half the 1440p Ultra result of 76.9 FPS, which itself is well below the 126.8 FPS seen at 1080p Ultra. The gap between Medium and Ultra at 4K is notable: 64.6 FPS versus 38.6 FPS, a difference of 26.0 FPS. This suggests that Ultra settings introduce effects that are particularly expensive at high resolution, likely related to shadow quality and post-processing that scale with pixel count.
The overall pattern indicates that the CPU has ample headroom at 1080p, as evidenced by the high frame rates across all settings, but the GPU becomes the bottleneck as resolution increases. The data shows that 1440p is the sweet spot for this pair, with High settings delivering 112.1 FPS and even Ultra remaining playable at 76.9 FPS.
CPU Role
The Intel Core i7-13700K brings substantial compute resources to this pairing. With 16 cores and 24 threads, it provides the parallel throughput that tactical shooters like Ready Or Not can utilize for AI, physics, and world simulation. The processor's boost clock of 5.40 GHz is particularly relevant for the single-threaded workload that often dominates game logic, and its benchmark scores support this: the 3dmark single-thread score is 1136, while the passmark single-thread score reaches 4333.
The CPU's performance in multithreaded benchmarks suggests it is far from being a limiting factor in this game. The cinebench r23 multicore score of 39000 and the passmark multithread score of 45887 indicate that the processor can handle far more parallel work than Ready Or Not likely demands. The 3dmark 16-thread score of 10717 and the max-thread score of 12412 further confirm that the CPU has reserve capacity even under heavy load.
The 30 MB of shared L3 cache and 2 MB per-core L2 cache help reduce memory latency, which can matter in a tactical shooter where frame pacing and consistency are important. The fact that 1080p Low achieves 227.2 FPS and 1080p High reaches 177.0 FPS suggests that the CPU is not holding back the GPU at these lower resolutions. If the processor were a bottleneck, we would expect the frame rates to plateau regardless of settings, which is not what the data shows.
The processor's 93rd percentile ranking among all CPUs places it well above the median, and its average benchmark score of 47282 is competitive with its nearest rivals. The deltaPct values against the Intel Core i7-13700KF (-0.1%), AMD EPYC 4364P (+0.3%), Intel Core i9-12900F (+0.4%), and AMD Ryzen 9 PRO 5945 (-0.5%) all fall within a narrow band, indicating that the i7-13700K is performing essentially at parity with similar high-end parts.
How This Combo Ranks
Among all tested combinations in Ready Or Not, this pairing of the Core i7-13700K and RTX 3060 Ti ranks 1287 out of 1748 combos. This places it in the lower third of tested systems, which is somewhat surprising given the strong individual component benchmarks. The rank suggests that while the CPU is a high-performer, the GPU's 69th percentile ranking among all GPUs pulls the overall combo down relative to systems with more powerful graphics cards.
The GPU's average benchmark score of 25120 is close to its nearest rivals, with deltaPct values of -0.2% against the AMD Radeon RX 6700M, -0.5% against the RX 6600, -0.5% against the AMD Radeon 890M, and -0.7% against the RX 580 2048SP. This clustering indicates that the RTX 3060 Ti is a mid-range performer, and in a game like Ready Or Not, which appears to be reasonably well-optimized, the GPU's absolute performance ceiling determines the combo's ranking more than the CPU's capabilities.
The 1080p results show that this combo can exceed 100 FPS at High and Medium settings, which would place it ahead of many lower-end pairings. However, the 4K Ultra result of 38.6 FPS drags the overall ranking down, as the combo struggles to maintain playable frame rates at the highest settings and resolution. The rank of 1287 out of 1748 represents a system that is capable but not exceptional, suitable for 1080p and 1440p gaming but not for 4K Ultra.
FAQ
Q: What is the best resolution for this CPU-GPU combo in Ready Or Not?
A: The data shows 1440p as the optimal resolution, with High settings delivering 112.1 FPS and Medium reaching 126.1 FPS. At 1080p the frame rates are higher (177.0 FPS at High), but the visual fidelity gains at 1440p make it the better overall choice for this hardware.
Q: How does the RTX 3060 Ti compare to its closest competitors?
A: The GPU's average benchmark score of 25120 is within 0.7% of its nearest rivals. The AMD Radeon RX 6700M scores 25180 (deltaPct -0.2%), the RX 6600 scores 25235 (-0.5%), and the AMD Radeon 890M scores 25246 (-0.5%).
Q: Is the CPU or GPU the limiting factor at 4K?
A: The scaling from 1080p to 4K shows the GPU as the primary bottleneck. At High settings, frame rates drop from 177.0 FPS at 1080p to 58.2 FPS at 4K, a reduction of 118.8 FPS. The CPU's benchmark scores indicate it has ample headroom to feed the GPU at all resolutions.
Q: What frame rate can be expected at 1080p Ultra?
A: The measured average is 126.8 FPS at 1920x1080 with Ultra settings. This is lower than the 196.6 FPS at Medium and 227.2 FPS at Low, showing that Ultra settings impose a significant performance cost even at 1080p.
Q: How does this combo rank compared to all tested systems?
A: It ranks 1287 out of 1748 tested combos in Ready Or Not. This places it in the lower third of all tested configurations, reflecting the GPU's mid-range position despite the CPU's strong performance.
Q: What is the performance difference between Low and Ultra at 1440p?
A: At 2560x1440, Low settings achieve 140.8 FPS while Ultra drops to 76.9 FPS. This difference of 63.9 FPS represents a 45% reduction in frame rate when moving from the lowest to the highest settings.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is the decisive component in this pairing, as the resolution scaling analysis makes clear. With 8 GB of GDDR6 memory on a 256-bit bus and 448.0 GB/s of bandwidth, the card has sufficient memory throughput for 1080p and 1440p gaming but becomes strained at 4K. The 4864 shading units and 152 texture mapping units provide the raw compute power for the game's rendering, while the 80 ROPs handle pixel output.
The GPU's boost clock of 1665 MHz and base clock of 1410 MHz are modest by modern standards, and its FP32 performance of 16.20 TFLOPS places it firmly in the mid-range category. The 38 ray tracing cores are present but are unlikely to be heavily utilized in a tactical shooter that focuses on lighting and shadow fidelity rather than full ray-traced effects. The passmark g3d score of 20349 and the 3dmark steel nomad score of 2626 provide additional context for its compute capabilities.
The 4K results particularly highlight the GPU's limits. Even at Low settings, the 4K average of 71.4 FPS is below the 1080p Ultra result of 126.8 FPS, demonstrating that the card's memory bandwidth and shader throughput cannot keep pace with the fourfold increase in pixel count from 1080p. The Ultra 4K result of 38.6 FPS is below the 60 FPS threshold that most players consider smooth, indicating that this GPU is not suited for 4K gaming in this title.
At 1440p, the GPU performs more credibly. The High preset at 112.1 FPS and Medium at 126.1 FPS both exceed the 100 FPS mark, and even Ultra at 76.9 FPS remains playable. The 1080p results are strong across the board, with all settings except Ultra exceeding 177 FPS. This positions the RTX 3060 Ti as a capable 1080p and 1440p card that should not be pushed beyond those resolutions for a game like Ready Or Not.
Settings Recommendations
The measured data suggests that the High preset offers the best balance of visual quality and performance for this combo. At 1440p, High settings deliver 112.1 FPS, which is comfortably above the 60 FPS threshold and close to the 144 Hz refresh rate that many monitors support. The Medium preset at 126.1 FPS provides additional headroom for players who prioritize frame rate over visual fidelity, while the step to Ultra costs 49.2 FPS at 1440p (from 126.1 to 76.9 FPS) for marginal visual gains.
At 1080p, the High preset at 177.0 FPS is the recommended choice, as it stays well above the 144 Hz mark while offering better visual quality than Medium at 196.6 FPS. The Ultra preset at 126.8 FPS is still viable for players with 120 Hz displays, but the drop from High to Ultra represents a 50.2 FPS reduction that may not be justified by the visual improvements. The Low preset at 227.2 FPS is only recommended for competitive play where maximum frame rate is the priority.
For 4K, none of the presets deliver a fully smooth experience. Medium at 64.6 FPS and High at 58.2 FPS are borderline playable, while Ultra at 38.6 FPS is likely too choppy for a tactical shooter where precise aiming matters. Players with 4K displays should strongly consider running at 1440p instead, as the performance gain is substantial — from 58.2 FPS at 4K High to 112.1 FPS at 1440p High. The data shows that this hardware combination is best utilized at 1440p with High settings, which provides the optimal trade-off between visual quality and frame rate consistency.
Hardware Specifications
Intel Core i7-13700K
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-13700K + NVIDIA GeForce RTX 3060 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 71.4 |
| 3840x2160 | Medium | 64.6 |
| 3840x2160 | High | 58.2 |
| 3840x2160 | Ultra | 38.6 |
| 2560x1440 | Low | 140.8 |
| 2560x1440 | Medium | 126.1 |
| 2560x1440 | High | 112.1 |
| 2560x1440 | Ultra | 76.9 |
| 1920x1080 | Low | 227.2 |
| 1920x1080 | Medium | 196.6 |
| 1920x1080 | High | 177.0 |
| 1920x1080 | Ultra | 126.8 |
Ready Or Not with ii7-13700K + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 3060 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii7-13700K + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.