Ready Or Not

Ready Or Not

AVERAGE FPS
118
good

This combination provides smooth gameplay with an average of 118 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 60 64 73
1440p QHD 80 115 125 140
1080p Full HD 128 180 194 224

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 73
3840x2160 Medium 64
3840x2160 High 60
3840x2160 Ultra 39
2560x1440 Low 140
2560x1440 Medium 125
2560x1440 High 115
2560x1440 Ultra 80
1920x1080 Low 224
1920x1080 Medium 194
1920x1080 High 180
1920x1080 Ultra 128

Ready Or Not with Intel Core i5-14600KF + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

Resolution Scaling

The measured frame rates across resolutions reveal a classic GPU-bound scaling pattern, with the Intel Core i5-14600KF + NVIDIA GeForce RTX 3060 Ti combination showing diminishing returns as pixel count rises. At 1080p High settings, the combo produces 179.9 FPS average. Moving to 1440p High drops that to 114.7 FPS, a 36.2% reduction. The jump to 4K High yields 59.7 FPS, which is 48.0% below the 1440p result and 66.8% below the 1080p figure.

This scaling curve is steep, indicating that the RTX 3060 Ti's 8 GB GDDR6 memory and 448.0 GB/s bandwidth become the limiting factor as resolution increases. The 1080p to 1440p transition shows a relatively modest absolute FPS loss of 65.2 frames, while the 1440p to 4K step loses 55.0 frames. The percentage declines are consistent with a rendering pipeline where each additional pixel demands proportionally more shading throughput.

Low settings provide the clearest view of the CPU's headroom. At 1080p Low, the combo reaches 224.1 FPS, which is 24.6% higher than 1080p High. At 1440p Low, the result is 139.5 FPS, and at 4K Low it is 72.9 FPS. The gap between Low and High settings narrows as resolution climbs. At 1080p, the difference is 44.2 FPS; at 1440p it is 24.8 FPS; at 4K it is 13.2 FPS. This pattern confirms that at lower resolutions, the CPU can feed the GPU more frames, but at 4K the GPU's compute capacity becomes the dominant constraint.

Ultra settings illustrate the cost of maximum fidelity. At 4K Ultra, the average FPS falls to 39.0, which is below the 60 FPS threshold commonly associated with smooth gameplay. The 1440p Ultra result of 80.1 FPS is playable, while 1080p Ultra delivers 127.5 FPS. The scaling from Ultra at 1080p to 4K represents a 69.4% reduction, the largest drop across all settings presets. This indicates that the combination of higher resolution and Ultra-level effects taxes the RTX 3060 Ti's 16.20 TFLOPS FP32 throughput and 133.2 GPixel/s pixel rate heavily.

FAQ

Q: What is the best resolution for this combo in Ready Or Not?

A: The data shows 1440p High as the sweet spot, delivering 114.7 FPS average. This is comfortably above 60 FPS while maintaining visual quality, and it is 92.2% higher than the 4K High result.

Q: Can this combo handle 4K gaming?

A: Only at lower settings. At 4K Low, the average FPS is 72.9, and at 4K Medium it is 63.5. At 4K High, the result drops to 59.7 FPS, and Ultra falls to 39.0 FPS, suggesting that 4K requires reducing settings to maintain smooth performance.

Q: How does the CPU compare to its closest rival in synthetic benchmarks?

A: The Core i5-14600KF has an average benchmark score of 49367, which is 0.4% below the Intel Core i5-14600K (49166) and 0.5% above the AMD EPYC 4345P (49595). It also trails the AMD Ryzen 9 5950X (49062) by 0.6% and the Intel Xeon Gold 5318H (48698) by 1.4%.

Q: What is the GPU's percentile ranking?

A: The RTX 3060 Ti sits in the 69th percentile among all GPUs, with an average benchmark score of 25120. Its nearest rival, the AMD Radeon RX 6700M, scores 25180, which is 0.2% higher.

Q: Does the 8 GB VRAM limit performance at 4K?

A: The data suggests VRAM capacity is a factor. At 4K Ultra, the frame rate collapses to 39.0 FPS, and the scaling from 4K High (59.7 FPS) to 4K Ultra represents a 34.7% drop. This is consistent with the GPU running out of memory capacity for textures and geometry at higher settings.

Q: How does the combo rank among all tested configurations?

A: In Ready Or Not, this combo ranks 1259 out of 1748 tested combinations, placing it in the bottom 28.0% of the database. This is despite the CPU's 93rd percentile ranking among all processors.

How This Combo Ranks

The comboRankInGame field places this pairing at position 1259 out of 1748 tested combinations in Ready Or Not. This ranking is notable because the individual components hold disparate standings. The CPU, Intel Core i5-14600KF, ranks in the 93rd percentile among all CPUs, with an average benchmark score of 49367. The GPU, NVIDIA GeForce RTX 3060 Ti, sits in the 69th percentile among all GPUs, with an average score of 25120.

The gap between component percentiles and the final combo rank indicates that the GPU is the binding constraint in this game. A combo ranking at 1259 out of 1748 means that roughly 72.0% of tested configurations outperform it in Ready Or Not. This is a tactical shooter that appears to favor higher-end graphics hardware, and the RTX 3060 Ti's mid-tier positioning in the 69th percentile is not enough to push the combo higher.

The CPU's nearest rivals in synthetic testing include the Intel Core i5-14600K (0.4% faster), the AMD EPYC 4345P (0.5% faster), the AMD Ryzen 9 5950X (0.6% slower), and the Intel Xeon Gold 5318H (1.4% slower). None of these differences are large enough to materially affect the combo ranking. The GPU's nearest rivals are similarly close, with the AMD Radeon RX 6700M just 0.2% ahead and the AMD Radeon RX 6600 0.5% ahead.

The implication is that swapping the CPU for a slightly faster or slower model would not move the combo rank significantly. However, upgrading the GPU would have a proportionally larger impact, since the GPU performance delta is what separates this combo from higher-ranked configurations.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce 224.1 FPS average, Medium reaches 194.1 FPS, High yields 179.9 FPS, and Ultra drops to 127.5 FPS. The spread from Low to Ultra is 96.6 FPS, indicating that the GPU is the primary limiter even at 1080p, since reducing settings from Ultra to Low provides a 75.8% increase in frame rate.

At 2560x1440, the results are 139.5 FPS on Low, 125.2 FPS on Medium, 114.7 FPS on High, and 80.1 FPS on Ultra. The transition from 1080p to 1440p reduces frame rates by 37.8% on Low, 35.5% on Medium, 36.2% on High, and 37.2% on Ultra. This consistent percentage drop across settings suggests that resolution scaling is uniform and independent of quality preset.

At 3840x2160, the frame rates are 72.9 FPS on Low, 63.5 FPS on Medium, 59.7 FPS on High, and 39.0 FPS on Ultra. The 1440p to 4K transition results in 47.7% reduction on Low, 49.3% on Medium, 48.0% on High, and 51.3% on Ultra. The slightly larger reduction at Ultra settings points to additional memory pressure at 4K with maximum quality.

Comparing settings at each resolution, the gap between Low and Ultra grows as resolution increases. At 1080p, Ultra is 43.1% slower than Low. At 1440p, Ultra is 42.6% slower. At 4K, Ultra is 46.5% slower. This shows that Ultra settings become relatively more expensive at higher resolutions, likely due to texture memory requirements exceeding the 8 GB capacity.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip fabricated on Samsung's 8 nm process. It contains 17,400 million transistors on a 392 mm² die, with a transistor density of 44.4M per mm². The GPU operates at a base clock of 1410 MHz and a boost clock of 1665 MHz, with memory running at 1750 MHz (14 Gbps effective). The 8 GB of GDDR6 memory is accessed via a 256-bit bus, providing 448.0 GB/s of bandwidth.

For Ready Or Not, the GPU's 16.20 TFLOPS FP32 throughput and 253.1 GTexel/s texture rate are the key computational resources. The 80 ROPs and 133.2 GPixel/s pixel rate determine how quickly the GPU can fill framebuffers, which becomes critical at 4K. The 38 RT cores and 152 tensor cores are present but their impact on this tactical shooter's conventional rasterization workload is indirect.

The GPU's benchmark scores show a PassMark G3D score of 20349 and a PassMark GPU Compute score of 10006. In DirectX 12, the PassMark score is 78, while DirectX 11 yields 163. The GPU ranks in the 69th percentile overall, and its nearest rival is the AMD Radeon RX 6700M at 25180, which is 0.2% higher.

The measured FPS data shows that the GPU's memory bandwidth becomes a limiting factor at 4K. The 448.0 GB/s bandwidth is sufficient for 1080p and 1440p, where the combo exceeds 80 FPS on all settings. At 4K, the bandwidth is strained, particularly at Ultra settings where the frame rate drops to 39.0 FPS. This is consistent with the GPU struggling to feed the render pipeline with texture data at higher resolutions.

CPU Role

The Intel Core i5-14600KF features 14 cores and 20 threads, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. It is built on Intel's 10 nm process with a die size of 257 mm². The cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and 24 MB of shared L3 cache. The CPU supports DDR4 and DDR5 memory in a dual-channel configuration, and it includes ECC memory support.

In synthetic benchmarks, the CPU achieves a Cinebench R23 multicore score of 32889 and a single-core score of 4643. The Geekbench scores are 15636 multicore and 2778 single-core. PassMark results show a multithread score of 38697 and a single-thread score of 4273. The CPU ranks in the 93rd percentile among all processors.

The CPU's role in Ready Or Not is evident from the 1080p Low setting result of 224.1 FPS. This high frame rate indicates that the CPU can feed the GPU well beyond what the RTX 3060 Ti can render at higher settings. At 4K Ultra, the CPU is not the bottleneck, as the 39.0 FPS result is clearly GPU-limited. The CPU's 14 cores and 20 threads provide ample headroom for the game's logic and AI processing, even at high frame rates.

The nearest rival comparisons show the CPU's performance is tightly clustered. The Intel Core i5-14600K scores 49166, just 0.4% lower than the 14600KF's 49367. The AMD EPYC 4345P scores 49595, 0.5% higher. These small deltas mean the CPU choice has minimal impact on the combo's ranking. The CPU's boost clock of 5.30 GHz and 24 MB L3 cache are the specifications most relevant to gaming performance, where single-threaded responsiveness and cache hits reduce latency.

Hardware Specifications

Intel Core i5-14600KF

Cores / Threads 14 / 20
Base Clock 3500 MHz
Boost Clock 5300 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 3060 Ti in Ready Or Not

Resolution Settings Avg FPS
3840x2160 Low 72.9
3840x2160 Medium 63.5
3840x2160 High 59.7
3840x2160 Ultra 39.0
2560x1440 Low 139.5
2560x1440 Medium 125.2
2560x1440 High 114.7
2560x1440 Ultra 80.1
1920x1080 Low 224.1
1920x1080 Medium 194.1
1920x1080 High 179.9
1920x1080 Ultra 127.5

Ready Or Not with ii5-14600KF + Other GPUs

See how Ready Or Not performs with the same CPU but different graphics cards.

Ready Or Not with RTX 3060 Ti + Other CPUs

See how Ready Or Not performs with the same GPU but different processors.

Other Games with ii5-14600KF + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.