Ready Or Not

Ready Or Not is a tactical shooter that stresses both CPU and GPU, and the Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 4070 delivers a performance profile that shifts dramatically across settings and resolutions. The data shows a combo that is exceptionally strong at 1080p, where it can push well past 200 FPS even at Ultra settings, but which becomes increasingly GPU-bound as resolution climbs to 4K. This analysis breaks down the measured results, contextualizes them against rival hardware, and explains what the numbers reveal about the limiting component at each stage.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-14600KF is a 14-core, 20-thread processor from the Core 14th Gen series, built on Intel’s Raptor Lake architecture and the 10 nm process node. It operates with a base clock of 3.50 GHz and a boost clock of 5.30 GHz, with 24 MB of shared L3 cache. This configuration is central to understanding its performance in Ready Or Not, a game that benefits from strong single-thread performance for AI and physics calculations, but which also scales well with multi-core throughput during intense firefights and large map loads.

Benchmark data places the i5-14600KF in the 93rd percentile among all CPUs, with an average benchmark score of 49,367. Its nearest rivals include the Intel Core i5-14600K (scoring 49,166, a 0.4% difference) and the AMD Ryzen 9 5950X (scoring 49,062, a 0.6% difference). This shows the i5-14600KF sits in a tight performance band, marginally ahead of the i5-14600K and slightly behind the AMD EPYC 4345P (49,595, a -0.5% delta). In practical terms, this means the CPU has ample headroom to feed the RTX 4070 at lower resolutions, but its role becomes less critical at 4K where the GPU takes over as the primary bottleneck.

Looking at specific CPU benchmarks, the i5-14600KF scores 32,889 in Cinebench R23 multi-core and 4,643 in single-core. These figures indicate strong multi-threaded capability, which is relevant for Ready Or Not’s complex simulation layers. The 14 cores include both performance and efficiency cores, allowing the processor to handle background tasks without compromising game frame rates. At 1080p, where the CPU is more likely to be the limiting factor, the measured FPS of 369.1 on Low settings suggests the i5-14600KF can sustain very high frame rates, while the drop to 290.6 FPS on High shows how settings impact CPU load. The 5.30 GHz boost clock is particularly useful for maintaining consistent frame pacing in a game where sudden enemy encounters can spike CPU demand.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average FPS recorded for this combo in Ready Or Not?

A: The highest measured average FPS is 369.1, achieved at 1920x1080 resolution with Low settings. This is followed closely by 321 FPS at Medium settings and 290.6 FPS at High settings, all at the same 1080p resolution.

Q: How does the CPU compare to its closest rival in synthetic benchmarks?

A: The Intel Core i5-14600KF scores 49,367 on average, which is 0.4% higher than the Intel Core i5-14600K (49,166) and 0.6% higher than the AMD Ryzen 9 5950X (49,062). It trails the AMD EPYC 4345P by 0.5%, which scores 49,595.

Q: What is the largest FPS drop between settings at 4K resolution?

A: At 3840x2160, the largest drop occurs between Low and Ultra settings. The combo achieves 123.7 FPS on Low, but this falls to 67.6 FPS on Ultra, representing a reduction of 56.1 FPS. The gap between High and Ultra is also significant, at 28.5 FPS.

Q: How does the GPU’s benchmark score compare to its nearest rivals?

A: The NVIDIA GeForce RTX 4070 has an average benchmark score of 37,283, placing it in the 81st percentile of all GPUs. It is 0.6% ahead of the AMD Radeon RX Vega 56 (37,507) and 1.9% ahead of the NVIDIA GeForce MX570 A (38,008). However, it trails the AMD Radeon RX 5300M by 2.5%, which scores 36,371.

Q: Is the combo more CPU-bound or GPU-bound at 1440p?

A: At 2560x1440, the data suggests a transition point. With 233.9 FPS on Low and 186.1 FPS on High, the CPU still provides substantial headroom. However, the drop to 127.9 FPS on Ultra indicates the GPU is becoming more of a limiting factor, especially as settings increase. The 106.0 FPS difference between Low and Ultra at this resolution highlights the GPU’s growing influence.

Q: What is the combo’s rank among all tested configurations for Ready Or Not?

A: The combo ranks 435th out of 1,748 tested combinations, placing it in the top 25% of all configurations. This ranking reflects its strong overall performance, though it is not at the very top tier.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of resolution scaling that shifts the bottleneck from CPU to GPU. At 1920x1080, the combo achieves 369.1 FPS on Low, 321 FPS on Medium, 290.6 FPS on High, and 204.6 FPS on Ultra. These numbers indicate that at 1080p, the CPU (with its 5.30 GHz boost and 14 cores) is able to feed the GPU effectively, and the frame rates are limited more by the game’s engine and CPU processing than by the RTX 4070’s raw throughput.

Moving to 2560x1440, the FPS drops are notable but not drastic. Low settings yield 233.9 FPS, Medium 202.6 FPS, High 186.1 FPS, and Ultra 127.9 FPS. The percentage drop from 1080p to 1440p is roughly 37% on Low, 37% on Medium, 36% on High, and 37% on Ultra. This consistent scaling suggests that the GPU is beginning to take on more load, but the CPU still has enough headroom to maintain high frame rates. The fact that Ultra at 1440p still manages 127.9 FPS indicates the RTX 4070’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for this resolution.

At 3840x2160, the bottleneck clearly shifts to the GPU. Low settings produce 123.7 FPS, Medium 106.5 FPS, High 96.1 FPS, and Ultra 67.6 FPS. The drop from 1080p to 4K is substantial: 66% on Low, 67% on Medium, 67% on High, and 67% on Ultra. This uniformity shows that the RTX 4070’s compute resources (29.15 TFLOPS FP32, 46 RT cores, 184 tensor cores) are the limiting factor at 4K, regardless of settings. The CPU’s role diminishes, as even the highest CPU load at Low settings cannot compensate for the GPU’s pixel-pushing demands. The 96.1 FPS at High 4K is still playable, but the 67.6 FPS at Ultra indicates that 4K Ultra is the edge of this combo’s capability.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo’s rank of 435 out of 1,748 tested configurations places it in the 75th percentile or better, meaning it outperforms approximately 75% of all tested combos in Ready Or Not. This is a strong result, especially considering the CPU’s 93rd percentile standing among all CPUs and the GPU’s 81st percentile among all GPUs. However, the rank also shows that there are 434 combos that perform better, likely featuring higher-end GPUs like the RTX 4080 or RTX 4090, or more powerful CPUs.

In context, the i5-14600KF’s nearest CPU rivals (i5-14600K, EPYC 4345P, Ryzen 9 5950X) all score within 1.4% of each other, suggesting that swapping the CPU would have minimal impact on the combo’s rank. The GPU, however, has more headroom for improvement. The RTX 4070’s nearest rivals include the RX Vega 56 (0.6% faster) and the MX570 A (1.9% faster), but these are lower-tier cards. The RTX 4080 Mobile, which is 2.2% faster, represents a more significant step up. This suggests that the combo’s rank is primarily GPU-limited, and upgrading to a higher-tier GPU would yield a more substantial rank improvement than upgrading the CPU.

The rank of 435 also indicates that the combo is well-suited for high-refresh-rate 1440p gaming, as the 186.1 FPS at High settings and 127.9 FPS at Ultra are both above the 120 FPS threshold that many monitors target. At 4K, the rank drops in practical terms, as the 67.6 FPS at Ultra falls below the 90 FPS threshold that some players prefer for smooth tactical gameplay.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture with a 5 nm process node and the AD104 chip. It features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. The GPU has a base clock of 1920 MHz and a boost clock of 2475 MHz, with 5,888 shading units, 184 texture mapping units, and 64 ROPs. It also includes 46 ray tracing cores and 184 tensor cores, which are relevant for Ready Or Not’s lighting and AI-based features.

In terms of raw compute, the RTX 4070 delivers 29.15 TFLOPS of FP32 performance and a pixel rate of 158.4 GPixel/s. These specs drive the measured FPS results. At 1080p, the GPU is not the primary bottleneck, as evidenced by the 369.1 FPS on Low settings. However, at 4K, the GPU’s 12 GB VRAM and 504.2 GB/s bandwidth become critical. Ready Or Not’s textures and lighting effects at Ultra settings likely consume significant VRAM, and the 67.6 FPS at 4K Ultra indicates the GPU is hitting its limits.

The GPU’s benchmark scores confirm its position: 26,927 in Passmark G3D and 14,720 in Passmark GPU Compute, with a 3DMark Steel Nomad score of 3,854. These place it in the 81st percentile, just ahead of the RX Vega 56 (0.6% faster) but behind the MX570 A (1.9% faster). The GPU’s boost clock of 2475 MHz is well-utilized in Ready Or Not, as the game’s dynamic lighting and particle effects benefit from higher clock speeds. The 12 GB VRAM is sufficient for 1440p Ultra (127.9 FPS) but shows signs of strain at 4K Ultra (67.6 FPS), where the GPU’s memory bandwidth and compute units are the limiting factors.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a complete picture of the combo’s performance across three resolutions and four settings levels.

At 1920x1080, the combo achieves its highest frame rates. Low settings yield 369.1 FPS, Medium 321 FPS, High 290.6 FPS, and Ultra 204.6 FPS. The drop from Low to Ultra is 164.5 FPS, indicating that Ultra settings impose a significant load on the GPU. Even at Ultra, the frame rate is well above 144 Hz, making this resolution ideal for high-refresh-rate monitors. The CPU’s 5.30 GHz boost clock and 14 cores are clearly sufficient to maintain these rates, as the game is likely CPU-bound at this resolution for the most part.

At 2560x1440, the FPS figures are: Low 233.9 FPS, Medium 202.6 FPS, High 186.1 FPS, and Ultra 127.9 FPS. The gap between Low and Ultra is 106.0 FPS, a smaller absolute drop than at 1080p, but still substantial. The High setting at 186.1 FPS is excellent for 1440p gaming, while Ultra at 127.9 FPS remains playable on high-refresh-rate panels. The data suggests that the RTX 4070 is starting to become the limiting factor, as the FPS drop from High to Ultra (58.2 FPS) is larger than the drop from Medium to High (16.5 FPS).

At 3840x2160, the combo’s performance drops significantly. Low settings produce 123.7 FPS, Medium 106.5 FPS, High 96.1 FPS, and Ultra 67.6 FPS. The difference between Low and Ultra is 56.1 FPS, with the GPU clearly being the bottleneck. High settings at 96.1 FPS are still smooth for most players, but Ultra at 67.6 FPS is below the 90 FPS threshold that many tactical shooter players prefer. The consistent 67% drop from 1080p to 4K across all settings indicates that the RTX 4070’s compute and memory resources are fully taxed at this resolution, regardless of quality presets.