Ready Or Not

The data presents a striking picture for the Intel Core i5-13400F and NVIDIA GeForce RTX 4090 combination in Ready Or Not. This pairing produces exceptionally high frame rates across all tested resolutions, with performance that scales predictably with settings and resolution. The benchmark results reveal a system that is overwhelmingly GPU-bound at higher resolutions, while the CPU demonstrates its capability to feed the flagship GPU at lower resolutions. This analysis will break down the measured performance, contextualize the combo’s standing, and examine the roles of the processor and graphics card.

Resolution Scaling

The transition from 1080p to 4K provides a clear illustration of where the performance bottleneck lies. At 1920x1080 with Ultra settings, the combo achieves an average of 288.2 FPS. Moving to 2560x1440, that figure drops to 182.3 FPS, a significant reduction of approximately 37%. The jump to 3840x2160 further reduces the average to 94.2 FPS, which is roughly a 48% decrease from the 1440p result and a 67% decrease from the 1080p figure. This scaling pattern strongly suggests that the RTX 4090 is the limiting component as resolution increases.

The data implies that at 1080p, the system is likely constrained by the CPU, as the frame rates are exceptionally high but the GPU is not being fully utilized. The RTX 4090’s raw power, indicated by its 82.58 TFLOPS FP32 performance and 1.01 TB/s memory bandwidth, is capable of far more than what the processor can feed at this resolution. As resolution climbs to 1440p and then 4K, the GPU’s rendering workload increases, and the frame rates begin to reflect the graphics card’s limits rather than the CPU’s. The performance drop from Low to Ultra settings at 4K, from 171.6 FPS to 94.2 FPS, further confirms this, as the GPU is the primary driver of these changes.

How This Combo Ranks

The Intel Core i5-13400F and NVIDIA GeForce RTX 4090 combination holds a rank of 54 out of 1748 tested combos in Ready Or Not. This places it in the top 3.1% of all configurations tested, indicating a very high level of performance for this specific game. The combo’s rank confirms the strength of both components, as the RTX 4090 is a top-tier GPU and the i5-13400F provides sufficient single-threaded performance to avoid being a major bottleneck in most scenarios.

However, it is notable that this combination does not rank higher, given the GPU’s performance percentile of 91 among all GPUs. The CPU’s percentile of 82 among all CPUs suggests that while it is a capable partner, it is not the absolute best match for the RTX 4090. The data indicates that in Ready Or Not, the game’s engine may not fully utilize the 10 cores and 16 threads of the i5-13400F, meaning the CPU’s single-thread performance is more critical. This rank, while excellent, reflects a slight imbalance where the CPU holds back the GPU from reaching its absolute peak potential, especially at lower resolutions.

Settings Recommendations

Based on the measured FPS, the optimal settings depend on the target resolution and desired visual fidelity. At 4K, the High preset is the most balanced choice, delivering an average of 133.4 FPS. This is well above the 60 FPS threshold for smooth gameplay and provides a significant visual upgrade over the Medium preset, which achieves 148.3 FPS. The Ultra preset at 4K, while visually superior, drops to 94.2 FPS, which is still playable but sacrifices a considerable amount of performance for marginal visual gains.

For 1440p gaming, the High preset is again the strongest recommendation, with an average of 262.4 FPS. This frame rate is exceptionally high and will make full use of high-refresh-rate monitors. The Ultra preset at 182.3 FPS is also a viable option for those who prioritize image quality, as it remains well above the 144 FPS threshold. At 1080p, the data shows that the Ultra preset is the only reasonable choice for this hardware, as it achieves 288.2 FPS, which is still far beyond what most displays can show. The lower presets at 1080p, such as Low at 518.5 FPS, are purely academic, as the system is clearly CPU-limited and the extra frames are not visually discernible.

Measured FPS Breakdown

The complete set of measured average frame rates provides a detailed view of performance. At 1920x1080, the average FPS ranges from 518.5 on Low to 288.2 on Ultra, with Medium and High at 453.3 and 410 respectively. At 2560x1440, the figures are 327 for Low, 283.8 for Medium, 262.4 for High, and 182.3 for Ultra. At 3840x2160, the averages are 171.6 for Low, 148.3 for Medium, 133.4 for High, and 94.2 for Ultra.

The data shows a consistent pattern where each increase in settings level reduces the average FPS. The most significant drop occurs from Medium to High, and then from High to Ultra, reflecting the computational cost of advanced visual effects. The scaling from 1080p to 1440p is roughly a 20-30% reduction in FPS across all settings, while the scaling from 1440p to 4K is a more substantial 45-65% reduction. This information is crucial for users to understand the performance trade-offs when adjusting their graphical preferences.

FAQ

*Q: What is the highest average FPS recorded for this combo in Ready Or Not?*

A: The highest average FPS recorded is 518.5, achieved at 1920x1080 with Low settings.

Q: Is this combo more CPU-bound or GPU-bound at 1080p?

A: The data suggests it is CPU-bound at 1080p. The frame rates are extremely high, but the scaling from Low to Ultra settings shows a relatively smaller performance impact than at higher resolutions, indicating the CPU is the limiting factor.

Q: What is the performance difference between the Low and Ultra presets at 4K?

A: At 3840x2160, the Low preset achieves an average of 171.6 FPS, while the Ultra preset achieves 94.2 FPS. This represents a performance drop of 77.4 FPS, or about 45%, when switching from Low to Ultra.

Q: Does the combo rank in the top 100 of all tested configurations?

A: Yes, the combo is ranked 54 out of 1748 tested combos, placing it well within the top 100 and the top 3.1% of all configurations.

Q: Which preset provides the best balance of visual quality and performance at 1440p?

A: The High preset at 2560x1440 provides the best balance, achieving an average of 262.4 FPS. This is a very high frame rate that supports smooth gameplay on high-refresh-rate displays while offering improved visuals over Medium.

Q: How does the GPU’s performance percentile compare to the combo’s rank?

A: The GPU has a performance percentile of 91 among all GPUs, while the combo ranks at 54 out of 1748. This indicates that while the GPU is a top performer, the overall system performance is slightly constrained by the CPU, preventing a higher rank.

CPU Role

The Intel Core i5-13400F is a 10-core, 16-thread processor based on the Raptor Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. It features a 20 MB shared L3 cache and supports both DDR4 and DDR5 memory. The CPU’s benchmark scores, such as a Cinebench R23 multicore score of 21279 and a single-core score of 3004, indicate strong multi-threaded and single-threaded capabilities. Its 3DMark single-thread score of 960 is particularly relevant for gaming performance.

In Ready Or Not, the CPU’s role appears to be significant, especially at lower resolutions. The high frame rates at 1080p, such as 410 FPS on High, suggest that the CPU is the primary driver of performance, as the GPU is not fully saturated. The processor’s high single-thread performance, evidenced by its Passmark single-thread score of 3634, is likely the key factor in achieving these frame rates. The CPU’s 10 cores and 16 threads may not be fully utilized by the game engine, but the strong individual core performance ensures that the system does not become a major bottleneck, allowing the RTX 4090 to operate at high capacity at 1440p and 4K. The CPU’s performance is comparable to the Intel Core i7-13620H, with a negligible 0.1% difference in average benchmark score, indicating that this desktop processor is well-matched for this workload.

GPU Role

The NVIDIA GeForce RTX 4090 is a flagship graphics card built on the Ada Lovelace architecture, featuring 16,384 shading units and 128 RT cores. It operates at a boost clock of 2520 MHz and is equipped with 24 GB of GDDR6X memory on a 384-bit bus, delivering a bandwidth of 1.01 TB/s. The GPU’s raw compute power is immense, with 82.58 TFLOPS of FP32 performance and a texture rate of 1,290.2 GTexel/s. Its Passmark G3D score of 38194 and 3DMark Steel Nomad score of 9223 place it among the fastest consumer GPUs available.

The RTX 4090’s role in Ready Or Not is to provide the massive rendering power needed for high resolutions and settings. The data shows that the GPU becomes the limiting factor at 4K, where the Ultra preset drops to 94.2 FPS. This is not a sign of weakness, but rather a reflection of the game’s demanding visual effects at this resolution. The GPU’s 24 GB of VRAM ensures that memory capacity is not a constraint, even at 4K with Ultra settings. The GPU’s performance is notably close to that of the NVIDIA Tesla T4, with a difference of only -0.4% in average benchmark score, though the RTX 4090 is clearly optimized for gaming workloads. Its high memory bandwidth and pixel rate of 443.5 GPixel/s are crucial for maintaining high frame rates in a tactical shooter like Ready Or Not, where quick reflexes and clear visuals are paramount.