Ready Or Not

Ready Or Not is a tactical shooter where the Intel Core i5-13400F and NVIDIA GeForce RTX 4080 combination delivers exceptional frame rates, but the data reveals a clear shift in bottleneck behavior as resolution scales. At 1080p, the system is heavily CPU-limited, producing such high frame rates that the GPU is often not the primary constraint. However, as resolution increases to 4K, the load transitions decisively to the GPU, with the RTX 4080's performance ceiling becoming the defining factor for the experience.

Resolution Scaling

The measured FPS data shows a dramatic and consistent drop in performance as resolution increases from 1920x1080 to 3840x2160, indicating a well-balanced system that shifts its limiting component based on pixel count. At Low settings, the average frame rate falls from 469 FPS at 1080p to 155 FPS at 4K, a reduction of 314 FPS or roughly 67%. This steep decline is characteristic of a scenario where the CPU is the primary bottleneck at lower resolutions; the GPU is so fast that it finishes its work quickly, but the processor cannot feed it instructions fast enough to maintain the same frame rate. The 1080p Low result of 469 FPS is an extreme figure, demonstrating the i5-13400F's strength in this title but also its role as a limiter, as the RTX 4080 is likely capable of even higher output if given more data.

Moving to High settings, the trend continues. The average FPS drops from 372 at 1080p to 235 at 1440p, a 37% decrease, and then further to 123 at 4K, a cumulative 67% drop from the 1080p baseline. The scaling between 1440p and 4K is significant, with a 112 FPS difference. This suggests that at 1440p High, the system is still partially CPU-bound, but at 4K, the GPU's rendering workload becomes the dominant factor PWM. The 4K High average of 123 FPS is still very playable, but the performance ceiling is now set by the RTX 4080's raw throughput. The data indicates that for a 4K experience, the GPU is the definitive limiting component, whereas at 1080p, the CPU's instruction throughput is what caps the frame rate.

The Ultra preset provides the clearest picture of GPU scaling. At 1080p Ultra, the system achieves 261 FPS, which drops to 165 FPS at 1440p and 86 FPS at 4K. The 1440p to 4K transition alone represents a 48% performance loss, which is a more substantial relative drop than the 37% loss seen from 1080p to 1440p. This pattern confirms that the Ultra preset, with its increased visual complexity, places a heavier load on the GPU, making it the primary bottleneck even at 1440p. At 4K Ultra, the 86 FPS average is a demanding scenario, but it remains playable. The scaling pattern across all presets shows that while the CPU is a capable partner, the RTX 4080's performance at 4K is the definitive factor in determining the final frame rate.

CPU Role

The Intel Core i5-13400F is a 10-core, 16-thread processor from the Core 13th Gen series, based on the Raptor Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. Its benchmark results demonstrate strong multi-threaded performance, with a Cinebench R23 multi-core score of 22604 and a Passmark multi-thread score of 25032. This processing power is what allows the system to achieve the exceptionally high frame rates seen at 1080p, where the CPU is the limiting factor. In Ready Or Not, a tactical shooter that often involves complex AI and physics calculations for multiple enemies and civilians, the CPU's high thread count and boost clock are crucial for maintaining stable frame rates during intense firefights.

The data shows that the i5-13400F is the primary bottleneck at 1080p, as evidenced by the diminishing returns when lowering resolution. For example, at High settings, the difference between 1080p (372 FPS) and 1440p (235 FPS) is substantial, but the CPU is still able to push frame rates above 200 FPS. However, the 1080p Low result of 469 FPS suggests that the CPU is working at its limit, as the GPU is unlikely to be the constraint at such a low graphical load. This is supported by the CPU's percentile ranking of 77, meaning it performs better than 77% of all CPUs in the benchmark database, indicating it is a high-end part but not the absolute fastest available.

When compared to its nearest rivals, the i5-13400F's average benchmark score of 25292 is nearly identical to the AMD Ryzen 9 6900HS (25284, 0% delta). It is also very close to the Intel Core 5 120 (25362, -0.3%) and the AMD Ryzen 5 5600X3D (25365, -0.3%). These negligible performance differences suggest that in CPU-bound scenarios like 1080p gaming, the i5-13400F will perform on par with these competitorsable. However, the game's results show that the CPU is not a weak link at higher resolutions; as the GPU load increases, the i5-13400F has enough headroom to keep up, ensuring that the RTX 4080 is not starved of data. The CPU's single-thread performance, with a Cinebench R23 score of 3191 and a Passmark single-thread score of 3634, is also strong, which is beneficial for a game that may have one primary simulation thread.

Settings Recommendations

Based on the measured data, the optimal settings depend heavily on the target resolution and refresh rate. For players with a 1080p display, the High preset is the recommended choice. It delivers an average of 372 FPS, which is a significant 89 FPS increase over the Ultra preset's 261 FPS. The visual difference between High and Ultra is often marginal in practice, but the performance cost of 111 FPS is not worth it for most users. The Medium preset offers 409 FPS, but the jump from Medium to High is only 37 FPS, making High the sweet spot for the best balance of visual quality and performance.

At 1440p, the High preset is again the recommended option, providing a 235 FPS average. This is an excellent result for a high-refresh-rate 1440p monitor, ensuring smooth gameplay even in chaotic situations. The Ultra preset at 165 FPS is still very playable)Skip, but the High preset offers a 70 FPS advantage while likely looking nearly identical in most scenes. The Medium preset at 258 FPS is a valid choice for those prioritizing maximum frame rates, but the High preset's visual improvements are worth the 23 FPS loss.

For 4K gaming, the High preset is the most balanced choice, delivering a 123 FPS average. This is a comfortable frame rate for a 120Hz 4K display. The Ultra preset drops to 86 FPS, which is still playable but may not be ideal for a fast-paced tactical shooter where reaction time is critical. The Medium preset offers 135 FPS, but the Low preset at 155 FPS shows that the GPU is still the limiting factor at this resolution. The data suggests that the High preset is the best experience at 4K, as it provides a substantial visual upgrade over Medium with a relatively small performance penalty (12 FPS), while avoiding the heavy cost of Ultra (49 FPS less than High). The data indicates that for this combination, High is the universally recommended preset across all resolutions.

FAQ

Q: What is the average frame rate at 1440p with Ultra settings?

A: The measured average FPS for the Intel Core i5-13400F and NVIDIA GeForce RTX 4080 combination at 2560x1440 with Ultra settings is 165 FPS.

Q: How much faster is 1080p Low compared to 4K Ultra?

A: The average frame rate at 1080p Low is 469 FPS, while the average at 4K Ultra is 86 FPS. This represents a 383 FPS difference, with the 1080p Low setting being over five times faster.

Q: Is the CPU or GPU the main bottleneck at 4K resolution?

A: The data indicates that the GPU is the primary limiting component at 3840x2160. The frame rates are significantly lower than at 1080p, and the performance drop between 1440p and 4K is substantial, which is characteristic of a GPU-bound workload.

Q: What is the performance difference between the High and Ultra presets at 1080p?

A: At 1920x1080, the High preset achieves an average of 372 FPS, while the Ultra preset achieves 261 FPS. The Ultra preset is 111 FPS slower, representing a 30% performance penalty for the increased graphical fidelity.

Q: What is the lowest average FPS recorded for this system in Ready Or Not?

A: The lowest average FPS is 86, which occurs at the 3840x2160 resolution with the Ultra settings preset. The minimum FPS for this specific configuration was not recorded, but the Medium preset at 4K shows a min FPS of 115.

Q: Does the system maintain a playable frame rate at 4K High settings?

A: Yes, the measured average FPS at 3840x2160 with High settings is 123 FPS. This indicates the system can handle 4K gaming with high visual fidelity, though it is not as fast as the 235 FPS average seen at 1440p High.

GPU Role

The NVIDIA GeForce RTX 4080 is a high-end graphics card based on the Ada Lovelace architecture, featuring 16 GB of GDDR6X memory on a 256-bit bus, providing 716.8 GB/s of memory bandwidth. Its 9728 shading units and 76 RT cores deliver immense raw compute power, with an FP32 performance of 48.74 TFLOPS. This makes it an exceptionally fast GPU, as evidenced by its 86th percentile ranking among all GPUs in the database. In Ready Or Not, the GPU's role becomes more prominent as resolution increases, and the data shows it is the primary determinant of frame rates at 4K.

The benchmark results for the RTX 4080, such as a Passmark G3D score of 34457 and a Geekbench OpenCL score of 214739, confirm its high-end positioning. However, its performance in this game is notably high, with the system achieving over 100 FPS at 4K High. The GPU is clearly not a limiting factor at 1080p, where the CPU's instruction throughput is the bottleneck. At 1440p, the GPU begins to assert its influence, but it is only at 4K that it becomes the definitive constraint. The difference between 4K High (123 FPS) and 4K Ultra (86 FPS) demonstrates the GPU's sensitivity to increased graphical loads, such as higher-quality textures and effects that utilize its 16 GB of VRAM.

The RTX 4080's nearest rival, the RTX 4080 SUPER, has a nearly identical average benchmark score (54209 vs 54247, a 0.1% delta), indicating that their performance in this game would be very similar. The AMD Radeon RX 6750 GRE 12 GB, with a score of 55698, is actually 2.6% higher in the synthetic benchmark, but this does not guarantee better performance in Ready Or Not. The data from this specific game shows that the RTX 4080 is more than capable of delivering a high-refresh-rate experience at 1440p and a smooth 4K experience, with its 16 GB VRAM being a significant asset for high-resolution textures. The GPU's high memory bandwidth of 716.8 GB/s also helps in maintaining consistent frame rates in busy scenes with many objects and effects.

Measured FPS Breakdown

The measured FPS data for the Intel Core i5-13400F and NVIDIA GeForce RTX 4080 in Ready Or Not provides a complete picture of the system's performance across different settings and resolutions.

1920x1080:

• Low: The average FPS is 469, the highest recorded for this systemhe system. This figure highlights the CPU's capability but also suggests a CPU-bound scenario where the GPU is not fully utilized.
• Medium: The average FPS is 409, with a minimum of 348 and a maximum of 471. The min FPS indicates that even in demanding moments, the system stays well above 300 FPS.
• High: The average FPS is 372. This is a 37 FPS drop from Medium, but still an outstanding result for high-refresh-rate 1080p monitors.
• Ultra: The average FPS is 261. This is the most demanding 1080p preset, but the frame rate remains very high.

2560x1440:

• Low: The average FPS is 296, showing a significant 173 FPS drop from the 1080p Low result, indicating that the GPU is starting to take on more work.
• Medium: The average FPS is 258, with a minimum of 220 and a maximum of 297. This is a more controlled range of frame rates.
• High: The average FPS is 235. This is a 137 FPS drop from the 1080p High result, demonstrating the increased pixel count's impact.
• Ultra: The average FPS is 165. This is a 96 FPS drop from the 1080p Ultra result, showing a clear GPU-bound trend.

3840x2160:

• Low: The average FPS is 155, a 141 FPS drop from the 1440p Low result. This shows the GPU is now the primary bottleneck.
• Medium: The average FPS is 135, with a minimum of 115 and a maximum of 155. The min FPS of 115 is still a playable frame rate.
• High: The average FPS is 123. This is a 112 FPS drop from the 1440p High result, confirming the GPU's role as the limiter at 4K.
• Ultra: The average FPS is 86, the lowest recorded figure. This is the most demanding configuration and shows the performance cost of maxing out the game's visuals at 4K.

This breakdown shows a clear and logical progression of performance degradation as resolution and settings increase. The system is extremely capable at 1080p and 1440p, with the RTX 4080 ensuring smooth gameplay at 4K High. The data is consistent and shows no anomalies, providing a reliable reference for this hardware combination.