Ready Or Not

Ready Or Not on the AMD Ryzen 5 7600X + NVIDIA GeForce RTX 5060 combo shows a system that is heavily optimized for high-refresh-rate 1080p and 1440p play, but the Ultra preset proves to be a significant bottleneck even at lower resolutions. The data shows a clear hierarchy where the GPU is the primary limiting factor, with performance scaling that reveals the game’s sensitivity to both resolution and the demanding Ultra settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating a GPU-bound workload. At High settings, the average frame rate falls from 223.4 FPS at 1920x1080 to 141.8 FPS at 2560x1440, a 36.5% reduction, and then further down to 77.1 FPS at 3840x2160, a 45.6% reduction from 1440p. This pronounced scaling pattern is typical for a game where pixel throughput dominates, and the RTX 5060’s 8 GB VRAM and 128-bit memory bus become increasingly stressed as resolution climbs.

The Low preset shows a similar trend, with 280.6 FPS at 1080p dropping to 179.6 FPS at 1440p and 94.8 FPS at 4K. The percentage drops are almost identical to High, confirming that the scaling is resolution-driven rather than settings-driven. However, the gap between Low and High at the same resolution is relatively modest, for instance 280.6 vs 223.4 FPS at 1080p, suggesting that even lower graphical loads cannot fully mask the GPU’s limitations at higher pixel counts.

The most dramatic scaling occurs when moving from Medium to Ultra. At 4K, the Ultra preset delivers 54.2 FPS versus 80 FPS on Medium, a 32% performance penalty. This indicates that Ultra introduces effects that disproportionately tax the GPU, making 4K Ultra essentially unplayable for smooth gameplay. The data suggests that for consistent 60+ FPS at 4K, the user must stick to Low or Medium settings, while High at 4K falls just short of a locked 60 FPS target.

GPU Role

The NVIDIA GeForce RTX 5060, built on the Blackwell 2.0 architecture with a 5 nm process, is the clear performance ceiling in this combo. Its boost clock of 2497 MHz and base of 2280 MHz, combined with 8 GB of GDDR7 memory on a 128-bit bus, delivers a bandwidth of 448.0 GB/s. This memory configuration is the likely culprit for the steep 4K drop-off, as the frame buffer demand of Ready Or Not at 3840x2160 quickly approaches the VRAM capacity.

Benchmark results place the RTX 5060 in the 73rd percentile of all GPUs, with an average score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, scores 30097 with a deltaPct of 0, meaning the two are statistically tied. The data shows the RTX 5060’s FP32 performance of 19.18 TFLOPS and pixel rate of 119.9 GPixel/s, while texture rate stands at 299.6 GTexel/s. These figures explain why the card excels at 1080p, where it can leverage its compute power without hitting memory bandwidth walls.

The GPU’s role becomes more nuanced at 1440p. At High settings, the combo hits 141.8 FPS, which is well above the 60 FPS threshold for smooth play. Even Ultra at 1440p manages 97.7 FPS, showing that the card can handle higher presets when resolution is moderate. The measured results indicate that the RTX 5060 is not a 4K-capable card for this title, but it is exceptionally strong for 1080p and capable at 1440p, provided the user avoids the Ultra preset.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest measured average is 280.6 FPS, achieved at 1920x1080 resolution with Low settings.

Q: Can this combo run Ready Or Not at 4K with playable frame rates?

A: At 4K, only Low (94.8 FPS) and Medium (80 FPS) presets exceed 60 FPS. High settings drop to 77.1 FPS, and Ultra falls to 54.2 FPS, which is below the smoothness threshold.

Q: How does the RTX 5060 compare to its closest rival in synthetic benchmarks?

A: The RTX 5060 scores 30109 on average, while the AMD Radeon RX 7700 XT scores 30097, a deltaPct of 0, indicating they are effectively performance equals in general GPU benchmarks.

Q: What is the performance difference between 1080p and 1440p at High settings?

A: At High settings, the average FPS drops from 223.4 at 1920x1080 to 141.8 at 2560x1440, a reduction of 81.6 FPS or 36.5%.

Q: Is the Ultra preset viable at 1440p?

A: Yes, the average FPS at 2560x1440 with Ultra settings is 97.7 FPS, which provides a smooth experience, though it is significantly lower than the 153 FPS seen on Medium.

Q: Does the CPU or GPU limit performance more at 1080p?

A: The data shows the GPU is the limiting factor. At Low settings, the 1080p result of 280.6 FPS is far beyond typical CPU bottlenecks, but the frame rate still scales down as resolution increases, indicating GPU dependency.

Measured FPS Breakdown

At 1920x1080, the combo delivers outstanding results across all presets. Low settings produce 280.6 FPS, Medium yields 247.5 FPS, High reaches 223.4 FPS, and Ultra still manages 159.5 FPS. These numbers indicate that the RTX 5060 is never the limiting factor at this resolution, and even the most demanding preset remains far above the refresh rate of most monitors.

Moving to 2560x1440, the frame rates remain high but show the expected drop. Low settings average 179.6 FPS, Medium hits 153 FPS, High comes in at 141.8 FPS, and Ultra falls to 97.7 FPS. The transition from High to Ultra at 1440p is a 44.1 FPS loss, which is substantial but still leaves Ultra in playable territory.

At 3840x2160, the picture changes dramatically. Low settings average 94.8 FPS, which is the only preset that comfortably clears 60 FPS. Medium drops to 80 FPS, High further down to 77.1 FPS, and Ultra plummets to 54.2 FPS. The difference between Low and Ultra at 4K is 40.6 FPS, highlighting how the Ultra preset’s extra graphical features severely impact the GPU’s ability to maintain fluid frame rates.

CPU Role

The AMD Ryzen 5 7600X, a 6-core, 12-thread processor from the 7000 series with a base clock of 4.70 GHz and boost clock of 5.30 GHz, is not the bottleneck in this configuration. Its Zen 4 architecture, built on a 5 nm process, delivers strong single-thread performance, as evidenced by a 3dmark_single_thread score of 1060 and a cinebench_r23_singlecore score of 3406. The CPU’s 32 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide ample headroom for feeding the GPU.

The CPU’s percentile rank of 83 among all CPUs, with an average benchmark score of 26272, shows it is a solid mid-to-high-range part. Its nearest rival, the AMD Ryzen 7 PRO 6850U, scores 26262 with a deltaPct of 0, indicating they are statistically identical in average performance. However, the 7600X’s high boost clock is crucial for Ready Or Not, which appears to benefit from fast single-core throughput in CPU-bound scenarios.

The data suggests the CPU is rarely the limiting factor. At 1080p Low, the 280.6 FPS result would likely be higher if the CPU were the constraint, but the fact that resolution scaling still reduces frame rates proves the GPU is the primary bottleneck. The 7600X’s multicore performance, with a cinebench_r23_multicore score of 24128 and geekbench_multicore score of 12905, ensures that background tasks and game logic do not interfere with frame delivery.

Settings Recommendations

For an optimal experience, the benchmark data clearly favors Medium or High settings at 1080p and 1440p, while avoiding Ultra unless the user prioritizes visual fidelity over frame rate. At 1920x1080, High settings provide 223.4 FPS, which is a 24% reduction from Low’s 280.6 FPS but offers significantly better visuals for a negligible practical difference. Medium sits between them at 247.5 FPS, making it a strong choice for balanced performance.

At 2560x1440, High settings at 141.8 FPS are the best compromise, as they are well above the 100 FPS mark and look substantially better than Low’s 179.6 FPS. Ultra at 1440p yields 97.7 FPS, which is still smooth on a 60 Hz display but likely not worth the visual gain over High. For 4K, the only viable options are Low (94.8 FPS) or Medium (80 FPS), with High at 77.1 FPS being borderline and Ultra at 54.2 FPS being too slow.

The recommended preset for most users should be High at 1080p or 1440p, as it delivers a high frame rate while maintaining graphical quality. Users with high-refresh-rate monitors (144 Hz or above) at 1080p can safely use Ultra at 159.5 FPS, but at 1440p, they should stick to High to stay above 140 FPS. For 4K users, Medium is the ceiling for consistent 60+ FPS.

How This Combo Ranks

The AMD Ryzen 5 7600X + NVIDIA GeForce RTX 5060 combination ranks 857th out of 1748 tested combos in Ready Or Not, placing it in the middle of the database. This ranking reflects the system’s strong 1080p and 1440p performance but its weakness at 4K, particularly with the Ultra preset. The combo’s GPU is in the 73rd percentile, while the CPU is in the 83rd percentile, suggesting the overall rank is dragged down by the GPU’s limitations at higher resolutions.

Relative to other tested configurations, this combo is not a top-tier performer for 4K gaming, but its 1080p results are exceptional. The data indicates that the RTX 5060’s 8 GB VRAM is a limiting factor for this game’s Ultra settings, which likely require more memory or bandwidth. The combo’s rank of 857th out of 1748 means it sits above average but is outperformed by systems with higher-end GPUs, especially those with larger memory pools.

For users targeting 1080p or 1440p, this ranking understates the combo’s capability, as it excels in those resolutions. The system’s weakness is specifically the 4K Ultra scenario, where it falls below 60 FPS. Overall, the data shows a balanced mid-range setup that is ideal for competitive and high-refresh-rate play, but not for maxing out the game at 4K.