Pc Building Simulator
This combination delivers exceptional performance with an average of 241 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 89 | 93 | 131 | 185 |
| 1440p QHD | 168 | 178 | 251 | 348 |
| 1080p Full HD | 267 | 278 | 386 | 520 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with Intel Core Ultra X7 368H + NVIDIA GeForce RTX 5070, In-Depth Analysis
Pc Building Simulator presents an interesting benchmark scenario for the Intel Core Ultra X7 368H paired with the NVIDIA GeForce RTX 5070. The game is a simulation title that often behaves differently than traditional first-person shooters, with performance scaling that highlights the balance between CPU and GPU capabilities. The measured data provides clear guidance on how to configure this system for the best experience, with the sweet spot being the Medium preset, which offers a substantial improvement over Low while maintaining high frame rates across all resolutions.
Settings Recommendations
The benchmark results for this specific combination of Intel Core Ultra X7 368H and NVIDIA GeForce RTX 5070 indicate that the Medium preset delivers the most balanced experience across all tested resolutions. At 1920x1080, Medium yields an average of 186 FPS, which is a massive 71 FPS jump over High (131 FPS) and 61 FPS higher than Ultra (125 FPS). The Low preset does reach 262 FPS at 1080p, but this comes at a significant visual fidelity cost that is unnecessary for a simulation game where detail matters for the experience.
Moving to 2560x1440, the Medium preset maintains an average of 117 FPS, which is still well above the threshold for smooth gameplay. This represents a 34 FPS improvement over High (83 FPS) and a 38 FPS advantage over Ultra (79 FPS). The Low setting at 1440p reaches 165 FPS, but again, the visual trade-off is not justified when Medium provides such strong performance. The data shows that Medium is the recommended preset for the best experience, as it consistently outperforms High and Ultra by a wide margin while still looking significantly better than Low.
At 3840x2160, the Medium preset produces an average of 61 FPS with a minimum of 52 FPS and a maximum of 70 FPS. This is the only 4K setting that provides a playable experience, as High drops to 43 FPS, Low sits at 86 FPS, and Ultra falls to 41 FPS. While Low at 4K achieves higher frame rates, the visual quality would be severely compromised for a game centered on component aesthetics and system building. The Medium preset strikes the best balance between visual quality and performance, making it the clear choice for this hardware combination.
GPU Role
The NVIDIA GeForce RTX 5070 plays a central role in determining Pc Building Simulator's frame rates, particularly at higher resolutions. The GPU features 12 GB of GDDR7 memory on a 192-bit bus, providing 672.0 GB/s of bandwidth. With a base clock of 2325 MHz and a boost clock of 2512 MHz, the card is well-equipped to handle the graphical demands of a simulation game that renders detailed PC components and environments. The GPU's 6144 shading units and 80 ROPs contribute to its pixel rate of 201.0 GPixel/s, which is directly relevant to how many pixels the game can process each second.
The benchmark data clearly shows the GPU's influence when examining the scaling from Low to Ultra settings. At 1080p, the difference between Low (262 FPS) and Ultra (125 FPS) is 137 FPS, indicating that higher settings place progressively more load on the graphics card. The RTX 5070's 30.87 TFLOPS of FP32 compute power allows it to handle these increasing demands, but the gap between settings narrows as resolution increases. At 4K, the spread from Low (86 FPS) to Ultra (41 FPS) is 45 FPS, which suggests that at higher resolutions, the GPU is becoming the primary bottleneck.
The GPU's performance percentile of 82 places it above most graphics cards, and its average benchmark score of 40377 is competitive with rivals such as the AMD Radeon Pro 580 (40318, deltaPct 0.1) and AMD Radeon Pro 5300 (40870, deltaPct -1.2). The 12 GB memory capacity is sufficient for Pc Building Simulator, as the game does not appear to exceed this limit based on the measured performance. The data indicates that the RTX 5070 is well-suited for this title, providing strong performance at 1080p and 1440p, with playable results at 4K on Medium settings.
FAQ
Q: What is the best resolution and settings combination for this system in Pc Building Simulator?
A: The data shows that 2560x1440 on Medium settings provides the best overall experience, delivering 117 FPS average. This combines strong visual quality with frame rates that are high enough for smooth gameplay, and it avoids the performance drop seen at 4K.
Q: How does the RTX 5070's performance compare to its nearest rivals in this game?
A: The RTX 5070's average benchmark score of 40377 is nearly identical to the AMD Radeon Pro 580 (40318, deltaPct 0.1) and slightly higher than the AMD Radeon Pro WX 7100 (40063, deltaPct 0.8). It trails the AMD Radeon Pro 5300 (40870, deltaPct -1.2) by a small margin.
Q: Is the Ultra preset worth using over High settings?
A: No, the benchmark data shows that Ultra provides almost no benefit over High. At 1080p, Ultra produces 125 FPS versus 131 FPS for High, and at 1440p, Ultra gives 79 FPS versus 83 FPS for High. The 4K results show Ultra at 41 FPS versus 43 FPS for High, making High the better choice if visual fidelity is a priority.
Q: Can this system maintain 60 FPS at 4K in Pc Building Simulator?
A: Yes, but only on Medium settings, which achieves 61 FPS average with a minimum of 52 FPS. The High and Ultra presets both fall below 60 FPS at 4K, with averages of 43 FPS and 41 FPS respectively, while Low reaches 86 FPS but with significantly reduced visual quality.
Q: How does the CPU's performance compare to its rivals?
A: The Intel Core Ultra X7 368H has an average benchmark score of 40518, which is nearly identical to the Intel Core 7 253PE (40557, deltaPct -0.1) and Intel Core 5 223PE (40585, deltaPct -0.2). It slightly outperforms the AMD Ryzen 9 7940H (40431, deltaPct 0.2) and Intel Xeon 6507P (40426, deltaPct 0.2).
Q: What frame rates can be expected at 1080p with Low settings?
A: The data shows that Low settings at 1920x1080 produce an average of 262 FPS, which is the highest frame rate recorded for this combination. This suggests that the CPU is capable of feeding the GPU very quickly when graphical load is low.
How This Combo Ranks
The combination of the Intel Core Ultra X7 368H and NVIDIA GeForce RTX 5070 places at rank 1612 out of 3002 tested combos in Pc Building Simulator. This puts the system in the middle of the field, which is somewhat surprising given the individual performance of both components. The CPU sits at the 87th percentile compared to all CPUs, and the GPU is at the 82nd percentile, yet their combined ranking is only in the 54th percentile of all combos tested.
This ranking discrepancy suggests that Pc Building Simulator may not fully utilize the capabilities of this hardware. The game's simulation nature likely means that it has specific bottlenecks that prevent the CPU and GPU from working at their full potential together. The measured frame rates, however, tell a more nuanced story. At 1080p Medium, the system achieves 186 FPS, which is excellent for any game, and even at 4K Medium, it maintains 61 FPS. These results indicate that while the combo's rank is mid-pack, the actual gaming experience is quite good.
The rank of 1612 out of 3002 combos means that there are 1390 other combinations that perform better in this specific game. This could be due to other systems having CPUs or GPUs that are better suited to Pc Building Simulator's particular workload. The data shows that the system is not underperforming; rather, the game likely does not scale perfectly with this hardware configuration. Users should focus on the measured FPS numbers rather than the rank, as the actual gameplay experience is smooth and responsive across most settings and resolutions.
CPU Role
The Intel Core Ultra X7 368H features 16 cores and 16 threads, with a base clock of 2.00 GHz and a boost clock of 5.00 GHz. This Panther Lake architecture processor is built on Intel's 3 nm process and supports LPDDR5X memory with a dual-channel bus delivering 153.6 GB/s of bandwidth. The CPU's 18 MB of shared L3 cache provides ample storage for frequently accessed data, which is important for a simulation game that may need to track numerous system components and their states.
The CPU's benchmark results show strong multi-threaded performance, with a Cinebench R23 multi-core score of 28221 and a single-core score of 3984. The Passmark multi-thread score of 32956 and single-thread score of 4005 further demonstrate its capabilities. In Pc Building Simulator, the CPU's role is significant at lower resolutions where the GPU is not fully saturated. This is evident in the 1080p Low setting, which achieves 262 FPS, indicating that the CPU can handle the game's logic and physics at very high frame rates.
However, the CPU's impact diminishes at higher resolutions. The difference between 1080p and 1440p on Low settings is 97 FPS (262 vs 165), and the gap grows to 176 FPS when moving from 1080p to 4K Low (262 vs 86). This pattern shows that as resolution increases, the GPU becomes the limiting factor, and the CPU's 16 cores are sufficient to feed the RTX 5070 without becoming a bottleneck. The CPU's average benchmark score of 40518 places it nearly even with its nearest rivals, including the Intel Core 7 253PE (40557, deltaPct -0.1) and AMD Ryzen 9 7940H (40431, deltaPct 0.2).
Measured FPS Breakdown
The measured frame rates for this system in Pc Building Simulator provide a comprehensive picture of performance across three resolutions and four settings presets. At 1920x1080, the Low preset achieves 262 FPS average, which is the highest recorded result. Medium produces 186 FPS with a minimum of 158 and maximum of 214, while High delivers 131 FPS and Ultra reaches 125 FPS. These results show that at 1080p, the system is capable of extremely high frame rates, with even the most demanding Ultra preset maintaining well above 100 FPS.
At 2560x1440, the frame rates drop but remain strong. Low settings produce 165 FPS, Medium achieves 117 FPS with a range of 100 to 135, High delivers 83 FPS, and Ultra reaches 79 FPS. The scaling from 1080p to 1440p shows a consistent reduction across all settings, with the largest absolute drop occurring on Low (97 FPS decrease) and the smallest on Ultra (46 FPS decrease). This indicates that at higher settings, the GPU is already working harder, so the resolution increase has a proportionally smaller impact.
At 3840x2160, the system begins to show its limits. Low settings still achieve 86 FPS, but Medium drops to 61 FPS with a minimum of 52 and maximum of 70. High produces 43 FPS, and Ultra falls to 41 FPS. The 4K results clearly show that this combination is best suited for Medium settings or lower, as the High and Ultra presets fall below the 60 FPS threshold that many users consider the minimum for smooth gameplay. The data also reveals that the gap between Medium and High at 4K is 18 FPS, while the gap between High and Ultra is only 2 FPS, suggesting diminishing returns at the highest settings.
Resolution Scaling
The performance scaling from 1080p to 4K reveals important information about where the bottleneck lies in this system. At Low settings, the frame rate drops from 262 FPS at 1080p to 165 FPS at 1440p and then to 86 FPS at 4K. This represents a 37% reduction from 1080p to 1440p and a 67% reduction from 1080p to 4K. The consistent scaling pattern suggests that even at Low settings, the GPU is becoming more of a limiting factor as resolution increases, since the CPU's workload remains relatively constant while the GPU must process more pixels.
At Medium settings, the scaling is similar but slightly less dramatic. The frame rate goes from 186 FPS at 1080p to 117 FPS at 1440p (37% reduction) and then to 61 FPS at 4K (67% reduction from 1080p). This pattern is nearly identical to Low settings, indicating that the GPU is handling the increased graphical load from Medium settings without introducing additional bottlenecks. The minimum frame rates at Medium also scale accordingly, with 158 at 1080p, 100 at 1440p, and 52 at 4K.
The High and Ultra presets show the same proportional scaling, with High dropping from 131 FPS at 1080p to 83 FPS at 1440p to 43 FPS at 4K, and Ultra going from 125 to 79 to 41. The fact that all settings produce roughly the same percentage drop when moving from 1080p to 4K suggests that the GPU is the primary limiting factor across all settings. The CPU's 16 cores and 5.00 GHz boost clock are clearly sufficient to keep up with the game's demands at any resolution, as evidenced by the high frame rates at 1080p Low (262 FPS). The data indicates that users who want to play at 4K should stick with Medium settings, while those at 1080p or 1440p have the freedom to choose any preset and still achieve excellent performance.
Hardware Specifications
Intel Core Ultra X7 368H
NVIDIA GeForce RTX 5070
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra X7 368H + NVIDIA GeForce RTX 5070 in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Ultra | 89.0 |
| 3840x2160 | High | 93.0 |
| 3840x2160 | Medium | 131.0 |
| 3840x2160 | Low | 185.0 |
| 2560x1440 | Ultra | 168.0 |
| 2560x1440 | High | 178.0 |
| 2560x1440 | Medium | 251.0 |
| 2560x1440 | Low | 348.0 |
| 1920x1080 | Ultra | 267.0 |
| 1920x1080 | High | 278.0 |
| 1920x1080 | Medium | 386.0 |
| 1920x1080 | Low | 520.0 |
Pc Building Simulator with iUltra X7 368H + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RTX 5070 + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with iUltra X7 368H + RTX 5070
Explore FPS benchmarks for other games using this same hardware combination.