Pc Building Simulator
This combination delivers exceptional performance with an average of 194 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 70 | 73 | 103 | 146 |
| 1440p QHD | 133 | 140 | 198 | 279 |
| 1080p Full HD | 211 | 221 | 314 | 443 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with Intel Core Ultra 5 225 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
# How This Combo Ranks
The Intel Core Ultra 5 225 paired with the NVIDIA GeForce RTX 5070 Ti ranks 218th out of 3,002 tested combos in Pc Building Simulator. This places the combo in the top 7.3% of all configurations tested, a strong showing for a system built around a mid-range CPU and a high-end GPU. The percentile rankings support this: the CPU sits at the 85th percentile among all processors, while the GPU sits at the 86th percentile among all graphics cards. When both components are near the same percentile tier, the resulting combo performance tends to be balanced, and the data here reflects that equilibrium.
The rank of 218 out of 3,002 means there are 217 combos that outperform this pairing, but those are largely systems with top-tier flagship CPUs and GPUs. For a simulation game like Pc Building Simulator, which is not typically as demanding as AAA shooters or open-world titles, this combo sits comfortably in the upper echelon. The benchmark data shows that this pairing is not bottlenecked severely in either direction; the CPU's average benchmark score of 36,938 and the GPU's average benchmark score of 49,957 are both respectable, and their combined output lands the system in a position where it can handle the game's requirements with significant headroom.
Compared to its nearest rivals, the CPU's average score of 36,938 is nearly identical to the AMD Ryzen 5 5600F at 36,945, just 0.2% behind the AMD Ryzen 5 5500X3D at 37,018, and 0.4% behind the AMD Ryzen AI 7 PRO 450 at 37,093. The Intel Core i9-12900T sits at 37,112, a mere 0.5% ahead. This tells us the Ultra 5 225 is performing exactly where expected for its class. The GPU's average score of 49,957 is 0.1% behind the AMD Radeon RX Vega 64 at 50,001, 0.4% ahead of the Intel Arc A550M at 49,737, 2% behind the AMD Radeon RX 6900 XT at 50,951, and 3.1% ahead of the AMD Radeon RX 6800 XT at 48,477. These deltas are small, indicating the RTX 5070 Ti is in a tight competitive band with previous-generation flagship cards.
Settings Recommendations
The measured FPS data across all four settings presets provides a clear picture of how this combo handles Pc Building Simulator. At 1920x1080, the Low preset delivers an average of 443 FPS, Medium delivers 314 FPS, High delivers 221 FPS, and Ultra delivers 211 FPS. All of these are far beyond the 60 FPS threshold for smooth gameplay, and even the Ultra preset at 211 FPS leaves enormous headroom. The jump from High to Ultra at 1080p is only a 10 FPS drop, from 221 to 211, which is a negligible cost for the visual improvement.
At 2560x1440, the Low preset averages 279 FPS, Medium averages 198 FPS, High averages 140 FPS, and Ultra averages 133 FPS. Again, every preset clears 60 FPS with substantial margin. The step from Medium to High at 1440p costs 58 FPS (198 down to 140), which is a noticeable drop, but the resulting 140 FPS is still well above competitive thresholds. The step from High to Ultra costs just 7 FPS (140 to 133), making Ultra the logical choice for 1440p if visual fidelity is a priority.
At 3840x2160, the Low preset averages 146 FPS, Medium averages 103 FPS, High averages 73 FPS, and Ultra averages 70 FPS. This is where the combo starts to feel the pressure. The drop from Low to Medium is 43 FPS, and from Medium to High is 30 FPS. However, even at 4K Ultra, the system maintains 70 FPS, which is above the 60 FPS standard for most displays. The data suggests that for the best experience balancing visual quality and frame rate, the Ultra preset is viable at all three resolutions, but the measured FPS at 4K Ultra (70) is close enough to 60 that users with high-refresh 4K displays might prefer High (73) or Medium (103) for added stability.
The recommendation from the data is clear: at 1080p and 1440p, the Ultra preset is the optimal choice, as it delivers 211 FPS and 133 FPS respectively, both far above any perceptible smoothness threshold. At 4K, the Medium preset at 103 FPS offers the best combination of visual quality and frame rate headroom, though High at 73 FPS is also perfectly playable.
Resolution Scaling
The FPS scaling from 1080p to 4K reveals a system that is primarily GPU-bound at higher resolutions, but with CPU headroom that allows for massive frame rates at lower resolutions. At the Low preset, the average FPS drops from 443 at 1080p to 279 at 1440p, a 37% reduction, and then to 146 at 4K, a 48% reduction from 1440p. This steep decline indicates that the GPU is the limiting factor at 4K Low, as the CPU is capable of far more frames but the GPU cannot keep up with the pixel count.
At the Medium preset, the scaling is similar: 314 FPS at 1080p drops to 198 at 1440p (37% reduction) and then to 103 at 4K (48% reduction). The consistent percentage drops across Low and Medium suggest that the GPU is the bottleneck from 1440p upward. At the High preset, 221 FPS at 1080p falls to 140 at 1440p (37% reduction) and then to 73 at 4K (48% reduction). The Ultra preset follows the same pattern: 211 at 1080p, 133 at 1440p (37% reduction), and 70 at 4K (47% reduction).
The uniformity of these percentage drops — roughly 37% from 1080p to 1440p and 48% from 1440p to 4K — is a strong indicator that the GPU is the limiting component across all settings. If the CPU were the bottleneck, the scaling would flatten as resolution increases, because the CPU would cap the frame rate regardless of pixel count. Instead, the FPS continues to scale down with resolution, meaning the RTX 5070 Ti is doing all the heavy lifting at higher resolutions. The CPU, with its 10 cores and 10 threads, is more than capable of feeding the GPU at 1080p, where 443 FPS is achieved, but the GPU simply cannot maintain that throughput as the pixel count quadruples from 1080p to 4K.
Measured FPS Breakdown
At 1920x1080, the measured results are as follows. The Low preset averages 443 FPS, which is an exceptional figure that indicates the CPU is not a limiting factor at this resolution. The Medium preset averages 314 FPS, with a minimum of 267 FPS and a maximum of 361 FPS, showing a frame time variance of 94 FPS that suggests some scenes are more demanding than others. The High preset averages 221 FPS, and the Ultra preset averages 211 FPS. The 10 FPS difference between High and Ultra at 1080p is small, meaning the visual gains from Ultra come at a minimal performance cost.
At 2560x1440, the Low preset averages 279 FPS, a 37% drop from 1080p Low. The Medium preset averages 198 FPS, with a minimum of 168 FPS and a maximum of 228 FPS, a 60 FPS variance that is narrower than at 1080p. The High preset averages 140 FPS, and the Ultra preset averages 133 FPS. The 7 FPS difference between High and Ultra at 1440p is even smaller than at 1080p, reinforcing that Ultra is the sensible choice at this resolution.
At 3840x2160, the Low preset averages 146 FPS, which is still above 120 FPS and suitable for high-refresh 4K displays. The Medium preset averages 103 FPS, with a minimum of 88 FPS and a maximum of 119 FPS. This 31 FPS variance is the tightest of all the Medium presets across resolutions, indicating that 4K Medium is a stable configuration. The High preset averages 73 FPS, and the Ultra preset averages 70 FPS. The 3 FPS difference between High and Ultra at 4K is marginal, meaning users can enable Ultra without fearing a significant frame rate penalty.
The data shows a consistent pattern: the gap between High and Ultra narrows as resolution increases, from 10 FPS at 1080p to 7 FPS at 1440p to 3 FPS at 4K. This suggests that at higher resolutions, the GPU is so heavily loaded that the difference between High and Ultra settings becomes less impactful on the final frame rate.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with the GB203 chip, fabricated on a 5 nm process at TSMC. It contains 45,600 million transistors on a 378 mm² die. The GPU has 8,960 shading units, 280 texture mapping units, and 96 raster output units. It also includes 70 ray tracing cores and 280 tensor cores, making it a fully featured next-generation part.
The memory subsystem is a key strength: 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of bandwidth. The base clock is 2295 MHz with a boost clock of 2452 MHz, and the memory runs at 1750 MHz (28 Gbps effective). The GPU's compute capabilities include 43.94 TFLOPS of FP32 performance and an equal 43.94 TFLOPS for FP16. The pixel rate is 235.4 GPixel/s and the texture rate is 686.6 GTexel/s.
In Pc Building Simulator, the GPU's role is dominant, as evidenced by the resolution scaling analysis. The 16 GB of GDDR7 memory is more than sufficient for a simulation game, which typically does not require large texture pools. The 896.0 GB/s of memory bandwidth ensures that the GPU is never starved for data, even at 4K Ultra settings. The boost clock of 2452 MHz, combined with the 8,960 shading units, delivers the raw compute needed to sustain 70 FPS at 4K Ultra.
The GPU's percentile ranking of 86th among all GPUs places it in the upper tier of graphics cards. Its average benchmark score of 49,957 is competitive with previous-generation high-end cards, and the 3DMark Steel Nomad DX12 score of 6,604 and Geekbench Vulkan score of 225,122 confirm its DirectX 12 and Vulkan capabilities, which are relevant for a modern simulation title. The PassMark G3D score of 32,974 further substantiates its strong rasterization performance.
CPU Role
The Intel Core Ultra 5 225 is a 10-core, 10-thread processor based on the Arrow Lake architecture, built on a 3 nm process at TSMC. It has a base clock of 3.30 GHz and a boost clock of 4.90 GHz. The cache hierarchy includes 192 KB of L1 per core, 3 MB of L2 per core, and 20 MB of shared L3 cache. The CPU supports DDR5 memory on a dual-channel bus with 102.4 GB/s of bandwidth, and it uses the Intel Socket 1851.
The CPU's benchmark results show strong single-thread and multi-thread performance. The Cinebench R23 multicore score is 25,891, and the single-core score is 3,655. The PassMark single-thread score is 4,412, and the multithread score is 30,459. The CPU's average benchmark score of 36,938 places it at the 85th percentile among all CPUs, which is solid for a mid-range desktop processor.
In Pc Building Simulator, the CPU's role is to feed the GPU with draw calls and game logic. The game is a simulation title, which means it can be CPU-intensive in certain scenarios, particularly when many objects are being rendered or when complex physics calculations occur. However, the measured FPS at 1080p Low (443 FPS) demonstrates that the CPU is not a bottleneck at lower resolutions. The 10 cores and 10 threads, combined with the 4.90 GHz boost clock, provide ample single-thread performance for the game's main thread, and the 20 MB of L3 cache helps reduce memory latency.
The CPU's nearest rivals show it is performing exactly in line with expectations. The AMD Ryzen 5 5600F matches its average score at 36,945 (0% delta), while the AMD Ryzen 5 5500X3D is just 0.2% ahead at 37,018. The AMD Ryzen AI 7 PRO 450 is 0.4% ahead at 37,093, and the Intel Core i9-12900T is 0.5% ahead at 37,112. These tiny deltas indicate that the Ultra 5 225 is competitively positioned within its segment, and its 65W TDP makes it an efficient choice for a simulation-focused build.
FAQ
Q: What is the highest average FPS this combo achieves in Pc Building Simulator?
A: The highest average FPS is 443, achieved at 1920x1080 resolution with the Low settings preset.
Q: Is the Ultra settings preset playable at 4K?
A: Yes, the Ultra preset at 3840x2160 averages 70 FPS, which is above the 60 FPS standard for smooth gameplay.
Q: How much FPS is lost when going from High to Ultra at 1440p?
A: At 2560x1440, the High preset averages 140 FPS and the Ultra preset averages 133 FPS, a drop of 7 FPS.
Q: What is the minimum FPS recorded in any measured configuration?
A: The lowest minimum FPS recorded is 88, which occurred at 3840x2160 resolution with the Medium settings preset.
Q: How does the CPU's average benchmark score compare to its closest rival?
A: The Intel Core Ultra 5 225 has an average benchmark score of 36,938, which is identical to the AMD Ryzen 5 5600F at 36,945 (0% delta).
Q: What is the GPU's memory bandwidth and how does it affect performance?
A: The RTX 5070 Ti has 896.0 GB/s of memory bandwidth from its 16 GB of GDDR7 memory on a 256-bit bus, which ensures the GPU is never starved for data, even at 4K Ultra settings.
Hardware Specifications
Intel Core Ultra 5 225
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 225 + NVIDIA GeForce RTX 5070 Ti in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 146.0 |
| 3840x2160 | Medium | 103.0 |
| 3840x2160 | High | 73.0 |
| 3840x2160 | Ultra | 70.0 |
| 2560x1440 | Low | 279.0 |
| 2560x1440 | Medium | 198.0 |
| 2560x1440 | High | 140.0 |
| 2560x1440 | Ultra | 133.0 |
| 1920x1080 | Low | 443.0 |
| 1920x1080 | Medium | 314.0 |
| 1920x1080 | High | 221.0 |
| 1920x1080 | Ultra | 211.0 |
Pc Building Simulator with iUltra 5 225 + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RTX 5070 Ti + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with iUltra 5 225 + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.