Pc Building Simulator

Pc Building Simulator, with its focus on component selection and assembly, presents a unique benchmarking scenario. The measured data for the Intel Core i7-14700F and NVIDIA GeForce RTX 3080 Ti combination reveals a system that is overwhelmingly capable, with performance scaling that clearly defines the GPU as the primary bottleneck at higher resolutions. The data indicates a strong pairing, placing in the top percentile of tested configurations for this simulation title.

Resolution Scaling

The frame rate data across the three tested resolutions shows a classic performance curve, with the most significant drop occurring between 1080p and 1440p. At Low settings, the average frame rate falls from 363.5 FPS at 1920x1080 to 229.9 FPS at 2560x1440, a reduction of 133.6 FPS. The drop from 1440p to 4K is less severe in absolute terms, going from 229.9 FPS to 122.3 FPS, but the relative impact is substantial. This pattern strongly indicates that the CPU is not the limiting factor at lower resolutions; the GPU is being fed frames as fast as it can render them.

At Ultra settings, the scaling is tighter. The average frame rate at 1080p is 172.4 FPS, which drops to 109.3 FPS at 1440p and then to 55.5 FPS at 4K. The gap between 1080p and 4K performance narrows as the settings increase, which is a hallmark of a GPU-bound scenario. The workload becomes more demanding on the graphics card, and the CPU's headroom becomes less relevant. The 4K Ultra result of 55.5 FPS is just below the 60 FPS target, while the 4K High setting achieves 59.1 FPS, showing how close the system is to that threshold.

The data suggests that the RTX 3080 Ti's 12 GB of GDDR6X memory and 912.4 GB/s of bandwidth are sufficient for the game's demands, as the frame rate drops are consistent with increasing pixel count and shader complexity rather than a memory capacity limitation. The CPU, with its 20 cores and 28 threads, appears to be supplying data efficiently, as evidenced by the high frame rates at 1080p, where a slower processor would likely bottleneck the GPU. The system is well-balanced, with the GPU being the defining factor in performance scaling from 1440p upwards.

Settings Recommendations

Based on the measured average FPS, the optimal experience depends heavily on the target resolution and refresh rate. For 4K displays, the High preset, at 59.1 FPS, is the only viable option for a smooth experience, as Ultra drops to 55.5 FPS. The Medium preset at 84.6 FPS provides a significant performance buffer, making it the recommended choice for maintaining a consistent frame rate above 60 FPS on a 4K panel. The Low preset at 122.3 FPS is an option for players prioritizing maximum frame rates over fidelity, but the jump from Low to Medium is a modest 37.7 FPS decrease for a likely large visual improvement.

At 2560x1440, the system has more headroom. The Ultra preset, at 109.3 FPS, is fully playable and should be the default choice for most users with high-refresh-rate monitors. The High preset at 114.5 FPS offers a marginal gain and could be used if a higher, more stable frame rate is desired. The Medium preset at 164.4 FPS is an excellent choice for competitive play or for users with 165Hz displays, as it provides a substantial frame rate increase with a reduction in visual quality. The Low preset at 229.9 FPS is unnecessary for this resolution.

For 1920x1080, the system is so powerful that the choice of preset is purely a matter of preference. The Ultra preset at 172.4 FPS will easily drive a 144Hz or 165Hz monitor, and the High preset at 184.6 FPS offers a small boost. The Medium preset at 257.5 FPS is for users with very high refresh rate displays, but even the Ultra setting provides a fluid and responsive experience. The data shows that the RTX 3080 Ti is never the limiting factor at this resolution, and users should select settings based on visual quality preferences without concern for playability.

FAQ

Q: Can this system run Pc Building Simulator at 4K with maximum settings?

A: No, not at a consistent 60 FPS. The measured average at 3840x2160 with the Ultra preset is 55.5 FPS. The High preset achieves 59.1 FPS, which is closer to the 60 FPS target.

Q: What is the best setting to use for a 1440p monitor?

A: The Ultra preset is recommended, as it delivers an average of 109.3 FPS at 2560x1440, which is well-suited for high-refresh-rate displays. If a higher frame rate is prioritized, the Medium preset provides 164.4 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: At 1080p, the GPU is the limiting factor, as frame rates are very high. At 4K, the GPU is clearly the bottleneck, with the performance drop from lower resolutions being significant. The CPU does not appear to limit performance.

Q: How does the RTX 3080 Ti compare to its nearest rival in this context?

A: The GPU's average benchmark score is 41,224, which is 0.5% lower than the NVIDIA GeForce RTX 3090's 41,441. This indicates near-identical performance in general compute tasks, and the in-game FPS data reflects a similar standing.

Q: What kind of frame rate can I expect at 1080p with High settings?

A: The measured average FPS at 1920x1080 with the High preset is 184.6. This is more than sufficient for smooth gameplay on any standard monitor.

Q: Is the i7-14700F a strong match for the RTX 3080 Ti?

A: Yes, the benchmark data shows a well-balanced pairing. The CPU's strong multi-threaded and single-threaded scores allow it to keep up with the GPU at all tested resolutions, as indicated by the high frame rates even at 1080p.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its peak performance. The Low preset delivers an average of 363.5 FPS, which is exceptionally high and indicates a significant amount of headroom. The Medium preset reduces this to 257.5 FPS, while the High preset achieves 184.6 FPS. The most demanding Ultra preset still produces an average of 172.4 FPS, ensuring a consistently smooth experience at this resolution regardless of the visual settings chosen.

Moving to 2560x1440, the performance remains strong but begins to show the GPU's workload. The Low preset produces an average of 229.9 FPS, a drop of 133.6 FPS from 1080p. The Medium preset hits 164.4 FPS, and the High preset averages 114.5 FPS. The Ultra preset, which is the most demanding, still manages an average of 109.3 FPS, making it a very viable option for high-refresh-rate 1440p gaming.

At 3840x2160, the system's performance is more constrained. The Low preset averages 122.3 FPS, which is still very playable. The Medium preset drops to 84.6 FPS, and the High preset to 59.1 FPS. The Ultra preset produces the lowest average of 55.5 FPS. This data clearly illustrates that 4K gaming on the highest settings is the only area where the RTX 3080 Ti is pushed to its limits, falling just short of the 60 FPS mark.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is the central component in determining this game's performance. Its 12 GB of GDDR6X memory, running at 19 Gbps effective with a 384-bit bus, provides a bandwidth of 912.4 GB/s. This is a substantial amount of memory bandwidth, and the data suggests it is more than adequate for Pc Building Simulator, as frame rates scale predictably with resolution and settings without any sudden drops that would indicate a memory capacity issue.

The GPU's compute capabilities are defined by its 10,240 shading units, 320 TMUs, and 112 ROPs. It also features 80 RT cores and 320 Tensor cores, which are not heavily utilized in this simulation title. The GPU's boost clock of 1665 MHz and base clock of 1365 MHz are not the primary drivers of performance here; rather, the sheer number of processing units is. The FP32 performance of 34.10 TFLOPS indicates a massive parallel processing capability, which is the key factor in rendering the game's scenes.

The benchmark position of the RTX 3080 Ti is strong, with a percentile vs. all GPUs of 83. Its average benchmark score of 41,224 is nearly identical to the NVIDIA GeForce RTX 3090, showing a deltaPct of only -0.5%. This places it in a very high performance tier, and the measured FPS data confirms this. The GPU is the primary bottleneck at 4K resolution, but at 1080p and 1440p, it provides an exceptional level of performance that allows the CPU to operate without being a limiting factor.

CPU Role

The Intel Core i7-14700F provides the processing foundation for this system. With 20 cores and 28 threads, it offers substantial parallel processing power, which is reflected in its high multi-threaded benchmark scores. The Cinebench R23 multi-core score of 35,443 and Geekbench multi-core score of 16,571 indicate a processor capable of handling complex simulation logic, which is relevant for a game about building and managing PCs.

The CPU's single-threaded performance is also strong, as shown by its Cinebench R23 single-core score of 5,003 and Geekbench single-core score of 2,711. This is important because even in a simulation title, a significant portion of the game logic is serialized. The boost clock of 5.40 GHz and base clock of 2.10 GHz suggest a wide dynamic range, allowing it to scale performance based on workload demands.

The processor sits in the 94th percentile vs. all CPUs, with an average benchmark score of 54,097. This is very close to its nearest rivals, with a deltaPct of -0.6% compared to the AMD Ryzen 9 9900X. In the context of Pc Building Simulator, the CPU's role is to ensure that the game logic and physics calculations are not a bottleneck. The measured FPS data shows that even at 1080p with Low settings, where the CPU load is highest relative to the GPU, the system achieves 363.5 FPS, proving the i7-14700F is more than capable of feeding the RTX 3080 Ti. The CPU is not the limiting factor at any resolution or settings combination in this data set.