Pc Building Simulator
This combination delivers exceptional performance with an average of 169 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 66 | 92 | 130 |
| 1440p QHD | 117 | 123 | 175 | 249 |
| 1080p Full HD | 189 | 198 | 281 | 344 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with Intel Core i3-12100F + NVIDIA GeForce RTX 5070, In-Depth Analysis
Pc Building Simulator is a simulation title that stresses system component selection and configuration, and the benchmark results for the Intel Core i3-12100F paired with the NVIDIA GeForce RTX 5070 reveal a combination that is heavily influenced by the graphics card. The data shows a clear pattern: this combo delivers extremely high frame rates at lower resolutions, while performance scales down predictably as resolution increases, with the GPU becoming the primary bottleneck at 4K. This page breaks down the measured performance, ranking, and the specific roles of the CPU and GPU in this particular game.
Resolution Scaling
The measured FPS data shows a classic resolution scaling curve, with the most dramatic drops occurring between 1080p and 4K. At 1080p with Low settings, the combo achieves an average of 344.2 FPS. Moving to 1440p Low drops that to 249.4 FPS, a substantial decrease, and then at 4K Low it falls to 130.2 FPS. This pattern indicates that at lower resolutions, the system is likely not fully GPU-bound, but the gap between 1440p and 4K is still significant, showing the GPU’s workload increasing.
The scaling is less severe when moving from High to Ultra settings. At 1080p High, the average is 198.3 FPS, and at 1440p High it is 122.7 FPS. At 4K High, the average is 65.6 FPS. The drop from 1440p to 4K at High settings represents a roughly 46% reduction in frame rate, which is a larger percentage drop than the 1080p to 1440p transition. This suggests that at 4K, the RTX 5070 is working much harder, and the CPU’s role diminishes.
The most telling data point for understanding the limiting component is the difference between Low and Ultra settings at the same resolution. At 1080p, the difference between Low (344.2 FPS) and Ultra (189.4 FPS) is 154.8 FPS. At 4K, the same comparison shows a difference of only 68.2 FPS (130.2 vs 62). This narrowing gap at higher resolutions is a strong indicator that the GPU becomes the limiting factor, as the performance ceiling is reached regardless of settings. The data suggests that at 4K, the RTX 5070 is the primary constraint, while at 1080p, the CPU and other system components have more headroom to push frame rates higher.
How This Combo Ranks
The Intel Core i3-12100F and NVIDIA GeForce RTX 5070 combination ranks 368 out of 1769 tested combos in Pc Building Simulator. This places it in the top 20.8% of all configurations tested, which is a solid position for a mid-range CPU paired with a high-end GPU. The ranking indicates that this combo outperforms the majority of other tested systems, but it is not at the very top tier.
The combo’s ranking is likely held back by the CPU’s relative weakness compared to the GPU’s strength. The RTX 5070 is a powerful card, but the Core i3-12100F is a budget-oriented processor. In a game like Pc Building Simulator, which is not typically a demanding title, the CPU can still keep up, but the overall combo rank reflects that there are many other pairings with more balanced or higher-end CPUs that achieve better overall performance. The data shows this is a strong performer, but not a top-tier contender.
GPU Role
The NVIDIA GeForce RTX 5070 is the dominant component in this pairing, and its specifications explain the high frame rates observed. It features 12 GB of GDDR7 memory on a 192-bit bus, providing a memory bandwidth of 672.0 GB/s. This is ample memory capacity and bandwidth for Pc Building Simulator, which is not a title known for requiring excessive VRAM. The GPU’s boost clock is 2512 MHz, and it has a base clock of 2325 MHz.
The GPU’s benchmark scores reinforce its capability. It has a Passmark G3D score of 29137 and a 3DMark Steel Nomad DX12 score of 5077. These scores place the RTX 5070 in the 83rd percentile of all GPUs, indicating it is a high-performance part. Its nearest rival, the NVIDIA GeForce RTX 3090, has an average benchmark score that is 0.6% lower, showing that the 5070 is competitive with a previous generation’s flagship. In Pc Building Simulator, the GPU’s power is evident in the 4K Ultra result of 62 FPS, which is playable but shows the card’s limits at the highest settings and resolution.
Measured FPS Breakdown
The measured FPS data provides a comprehensive look at how this combo performs across different settings and resolutions. The results are as follows:
- 1920x1080 (1080p): At Low settings, the average FPS is 344.2. Medium settings yield 280.6 FPS, High settings produce 198.3 FPS, and Ultra settings drop to 189.4 FPS.
- 2560x1440 (1440p): Low settings average 249.4 FPS, Medium settings average 175.3 FPS, High settings average 122.7 FPS, and Ultra settings average 116.7 FPS.
- 3840x2160 (4K): Low settings average 130.2 FPS, Medium settings average 92 FPS, High settings average 65.6 FPS, and Ultra settings average 62 FPS.
These numbers show that at 1080p, the combo is capable of delivering extremely high frame rates, even at Ultra settings, which is ideal for high-refresh-rate monitors. At 1440p, performance remains very strong, with all settings above the 116 FPS mark. The 4K results are the most telling; while Low settings are playable at over 130 FPS, Ultra settings fall to 62 FPS, which is still playable but not as smooth. The data shows a consistent pattern: performance drops as resolution and settings increase, but the system remains viable for gaming at all tested configurations.
FAQ
Q: What is the best resolution and settings combination for this CPU and GPU?
A: Based on the measured data, 1440p with Ultra settings is a strong choice, delivering an average of 116.7 FPS. For the highest frame rates, 1080p with Low settings achieves 344.2 FPS, but 1080p Ultra still provides a smooth 189.4 FPS.
Q: Is this combo capable of 4K gaming?
A: Yes, it is. At 4K with High settings, it averages 65.6 FPS, and at Ultra settings, it averages 62 FPS. This is playable, though not as fluid as lower resolutions.
Q: How does the RTX 5070 compare to the RTX 3090 in this game?
A: The RTX 5070’s average benchmark score is 41687, which is 0.6% higher than the RTX 3090’s average score of 41441. The measured FPS data suggests this small benchmark lead translates to similar or slightly better performance in Pc Building Simulator.
Q: Does the CPU bottleneck the GPU at 1080p?
A: The data suggests the CPU has more influence at 1080p, as the frame rates are extremely high. The drop from 344.2 FPS at Low to 189.4 FPS at Ultra implies the GPU is doing more work, but the CPU is not preventing high frame rates.
Q: What is the performance difference between High and Ultra settings at 1440p?
A: At 1440p, High settings average 122.7 FPS, while Ultra settings average 116.7 FPS. This is a difference of 6 FPS, indicating that the visual upgrade to Ultra comes at a small performance cost.
Q: How much faster is 1080p compared to 4K at High settings?
A: At High settings, 1080p delivers an average of 198.3 FPS, while 4K delivers 65.6 FPS. This means 1080p is roughly three times faster than 4K in this configuration.
CPU Role
The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture. It has a base clock of 3.30 GHz and a boost clock of 4.30 GHz. With 12 MB of shared L3 cache, it is a capable budget CPU. Its benchmark results show a Cinebench R23 multicore score of 11912 and a single-core score of 1681. The CPU’s Passmark single-thread score is 3444, and its multithread score is 14015.
In Pc Building Simulator, the CPU’s role is less critical than the GPU’s, as indicated by the resolution scaling. The CPU’s nearest rival, the AMD Ryzen Threadripper PRO 3975WX, has an average score that is 0.1% lower, showing that the i3-12100F is competitive in synthetic benchmarks despite having far fewer cores. The CPU’s percentile rank is 72, meaning it performs better than 72% of all CPUs in the database. This is a solid score for a budget chip.
The data shows that at 1080p, the CPU is able to feed the GPU enough data to achieve frame rates above 300 FPS on Low settings. However, the CPU’s 4 cores are a limiting factor when compared to more powerful processors. In a simulation game like Pc Building Simulator, which may have complex logic, the CPU’s performance is adequate but not exceptional. The combo’s overall ranking of 368 out of 1769 is likely influenced by the CPU, as pairing this i3 with a higher-end GPU like the RTX 5070 creates a slight imbalance, but the CPU does not prevent the system from achieving playable frame rates at any tested setting.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce RTX 5070
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 5070 in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 130.2 |
| 3840x2160 | Medium | 92.0 |
| 3840x2160 | High | 65.6 |
| 3840x2160 | Ultra | 62.0 |
| 2560x1440 | Low | 249.4 |
| 2560x1440 | Medium | 175.3 |
| 2560x1440 | High | 122.7 |
| 2560x1440 | Ultra | 116.7 |
| 1920x1080 | Low | 344.2 |
| 1920x1080 | Medium | 280.6 |
| 1920x1080 | High | 198.3 |
| 1920x1080 | Ultra | 189.4 |
Pc Building Simulator with ii3-12100F + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RTX 5070 + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with ii3-12100F + RTX 5070
Explore FPS benchmarks for other games using this same hardware combination.