Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
152
excellent

This combination delivers exceptional performance with an average of 152 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 57 81 114
1440p QHD 104 109 155 219
1080p Full HD 165 173 245 346

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 114
3840x2160 Medium 81
3840x2160 High 57
3840x2160 Ultra 54
2560x1440 Low 219
2560x1440 Medium 155
2560x1440 High 109
2560x1440 Ultra 104
1920x1080 Low 346
1920x1080 Medium 245
1920x1080 High 173
1920x1080 Ultra 165

Pc Building Simulator with AMD Ryzen 7 9850X3D + AMD Radeon RX 9070, In-Depth Analysis

Pc Building Simulator is a simulation title that tasks the CPU with heavy logic and the GPU with rendering a 3D workshop environment. The benchmark data for the AMD Ryzen 7 9850X3D paired with the AMD Radeon RX 9070 shows a system that scales predictably with resolution, but with a notable shift in the bottleneck between 1440p and 4K. The numbers indicate a strong pairing for high-refresh-rate 1440p gaming, while 4K performance remains playable but demands settings adjustments to maintain smooth frame rates.

Resolution Scaling

The measured average FPS for this combo shows a clear and significant drop as resolution increases, which is typical for a system where the GPU becomes the primary limiting factor at higher pixel counts. At 1080p with Low settings, the system achieves an average of 346 FPS, which is an exceptionally high ceiling for a simulation game. Moving to 1440p Low, the average drops to 219 FPS, a reduction of approximately 37% from the 1080p figure. This indicates that the GPU is still managing the load comfortably, and the CPU is likely keeping pace without becoming a hard bottleneck.

The scaling from 1440p to 4K is where the GPU strain becomes most apparent. At 4K Low, the average FPS is 114, which is a 48% drop from the 1440p Low result of 219 FPS. This steep decline confirms that the Radeon RX 9070 is being pushed much harder at 4K, and the workload is shifting decisively to the graphics card. The trend continues across all settings presets; for instance, at High settings, the average FPS goes from 173 at 1080p to 109 at 1440p and then to 57 at 4K. The scaling is not linear, with the largest relative hit occurring between 1440p and 4K, suggesting that 4K is the threshold where the GPU's pixel-pushing capabilities are saturated.

The data suggests that at 1080p and 1440p, the system is likely CPU-bound or at least balanced, as the frame rates are exceptionally high and the GPU has headroom. However, at 4K, the GPU becomes the definitive limiting component. The fact that 4K Low (114 FPS) is nearly double the 4K High (57 FPS) reinforces this; the GPU is sensitive to the increased shading and texture work at higher presets. For a builder targeting 4K, this combo will deliver playable frame rates but will require careful preset selection to avoid dropping below the 60 FPS threshold, as the Ultra preset at 4K yields an average of only 54 FPS.

How This Combo Ranks

In the specific context of Pc Building Simulator, this combination of the AMD Ryzen 7 9850X3D and AMD Radeon RX 9070 holds a rank of 830 out of 3002 tested combos. This places the setup in the top 28% of all configurations tested for this game. The percentile is a strong indicator that this is a high-performing pairing, as it outperforms a significant majority of other CPU and GPU combinations.

The CPU itself, the Ryzen 7 9850X3D, has a percentile ranking of 92 when compared to all CPUs in the database. This is a very high score, indicating that the processor is in the top 8% of all CPUs, which aligns with its strong benchmark results like a Cinebench R23 multi-core score of 22807. Its nearest rivals in the CPU benchmark list include the Intel Core i9-14900, which has a deltaPct of 0.5, meaning the Ryzen 7 9850X3D scores a mere 0.5% higher on average. This shows that in pure CPU compute, the 9850X3D is essentially neck-and-neck with one of Intel's best mainstream desktop chips.

The GPU, the Radeon RX 9070, has a lower percentile ranking of 69 when compared to all GPUs. This indicates that while it is a solid performer, it is not as dominant in the GPU hierarchy as the CPU is in its own hierarchy. Its nearest rival is the NVIDIA GeForce RTX 2080 SUPER, which has a deltaPct of -1.2, meaning the RX 9070 scores 1.2% lower on average. This context is important for the combo rank; the system's overall position in the top 28% is likely pulled up by the exceptionally strong CPU. In a simulation game like Pc Building Simulator, which is known for complex logic and physics calculations, the CPU's performance is critical, so the high CPU percentile is a major reason the combo ranks as well as it does.

FAQ

Q: What is the best resolution for this combo to achieve a high refresh rate?

A: The data shows that 1440p is the sweet spot. At 1440p High, the combo produces an average of 109 FPS, and at 1440p Low it reaches 219 FPS. This is well above the 60 FPS standard and allows for high refresh rate monitors to be utilized effectively.

Q: Can this system handle 4K gaming in Pc Building Simulator?

A: Yes, but with caveats. At 4K High, the average FPS is 57, which is just shy of a smooth 60 FPS experience. At 4K Medium, it improves to 81 FPS, making it the recommended 4K preset for a fluid experience. The Ultra preset at 4K drops to 54 FPS, which is not ideal.

Q: How does the CPU performance compare to its closest rivals?

A: The Ryzen 7 9850X3D has an average benchmark score of 58386. It is 0.1% faster than the Intel Xeon Platinum 8260M and 0.5% faster than the Intel Core i9-14900. It is slightly slower than the Intel Xeon w5-2545 by 0.2% and the AMD Ryzen AI 9 HX 470 by 0.7%.

Q: Is the GPU a bottleneck at 1080p?

A: The data suggests it is not a bottleneck. At 1080p Low, the system achieves 346 FPS, and at 1080p Ultra, it still manages 165 FPS. These high figures indicate the GPU is able to handle the load at 1080p, and the performance is likely limited by the CPU or game engine's frame rate ceiling at this resolution.

Q: What is the difference in performance between Low and Ultra settings at 1440p?

A: The difference is substantial. At 1440p Low, the average FPS is 219, while at 1440p Ultra, the average drops to 104 FPS. This is a reduction of over 50%, showing that the Ultra preset significantly increases the graphical workload on the GPU.

Q: Does the system maintain consistent frame times?

A: For the Medium preset, the data provides min and max FPS figures. At 1080p Medium, the average is 245 FPS, with a minimum of 209 and a maximum of 282. At 1440p Medium, the average is 155 FPS, with a minimum of 132 and a maximum of 178. These ranges indicate reasonably stable performance, with the minimum FPS staying within a safe margin of the average.

Settings Recommendations

For a balance of visual fidelity and performance, the Medium preset appears to be the most efficient choice across all resolutions. The measured data shows that at 1080p Medium, the average FPS is 245, which is a massive frame rate that is far beyond what a standard monitor can display. The jump from Low to Medium yields a significant visual improvement, while the performance cost is acceptable. Moving to High or Ultra at 1080p does not provide practical benefits for most displays, as the frame rate is already high, but it does reduce headroom.

At 1440p, the Medium preset is the clear recommendation. It provides an average of 155 FPS, which is excellent for high refresh rate gaming and is nearly 50% higher than the High preset's 109 FPS. The visual difference between Medium and High is often less noticeable in a simulation game like this, so the performance gain is worth the slight reduction in texture quality. The Ultra preset at 1440p yields 104 FPS, which is still good, but it is a significant drop from Medium, making it less favorable for competitive or smooth gameplay.

For 4K resolution, the Medium preset is the only sensible choice for a consistently smooth experience. The data shows 4K Medium achieves an average of 81 FPS, which is well above the 60 FPS target. The High preset at 4K drops to 57 FPS, which is borderline, and the Ultra preset at 54 FPS is too low for a comfortable experience. Therefore, if a user is targeting 4K, they should use the Medium preset to ensure the frame rate stays fluid. The Low preset at 4K provides 114 FPS, but the visual quality is substantially reduced, so it is only recommended for users who prioritize frame rate over everything else.

Measured FPS Breakdown

The measured FPS data for this combo is comprehensive, covering three resolutions and four settings presets. At 1920x1080, the performance is exceptionally high across the board. The Low preset produces an average of 346 FPS. The Medium preset produces an average of 245 FPS, with a minimum of 209 and a maximum of 282 FPS. Moving up, the High preset averages 173 FPS, and the Ultra preset averages 165 FPS. This shows that at 1080p, the system has immense headroom, and even the most demanding preset remains well above 150 FPS.

At 2560x1440, the performance is still very strong but shows the expected scaling. The Low preset averages 219 FPS. The Medium preset averages 155 FPS, with a minimum of 132 and a maximum of 178 FPS. The High preset averages 109 FPS, and the Ultra preset averages 104 FPS. The gap between High and Ultra is only 5 FPS, suggesting that the Ultra preset is not efficiently utilizing the GPU's resources at this resolution compared to High.

At 3840x2160, the GPU workload becomes the dominant factor. The Low preset averages 114 FPS, which is still playable. The Medium preset averages 81 FPS, with a minimum of 69 and a maximum of 93 FPS. This is the minimum FPS data point for 4K, showing that the frame rate can dip below 70 FPS in demanding scenes. The High preset averages 57 FPS, and the Ultra preset averages 54 FPS. The drop from 1440p to 4K is steep, with the High preset losing nearly half its frame rate, confirming the GPU is the limiting component at this resolution.

CPU Role

The AMD Ryzen 7 9850X3D is an 8-core, 16-thread processor based on the Zen 5 architecture, built on a 4 nm process. It has a base clock of 4.70 GHz and a boost clock of 5.60 GHz. This configuration provides substantial single-thread and multi-thread performance, as evidenced by its Cinebench R23 scores of 2228 for single-core and 22807 for multi-core. In a simulation game like Pc Building Simulator, which often relies on complex calculations and AI routines, this level of CPU performance is critical.

The CPU's benchmark results show a strong balance. Its PassMark single-thread score is 4704, and its multi-thread score is 41318. The high single-thread performance is essential for game logic and physics calculations that are often single-threaded. The multi-thread score is also strong, which helps with background tasks and any parallel processing the game may use.

The CPU's cache configuration is notable, with a large 96 MB of shared L3 cache. This is a significant amount of cache, which can help in games that have large working sets. The CPU also supports DDR5 memory with a dual-channel bus and a bandwidth of 89.6 GB/s, which is ample for feeding the CPU and GPU data quickly.

The data shows that the Ryzen 7 9850X3D is a top-tier performer in its own right, with a percentile rank of 92. This suggests that in this game, the CPU is likely not the limiting factor at lower resolutions like 1080p, where the ultra-high frame rates are proof of its capability. However, the data also indicates that the system's overall performance at 4K is heavily dictated by the GPU, as the CPU's performance is sufficient to avoid bottlenecking the Radeon RX 9070, but the GPU's raw throughput is what limits the final frame rates. The CPU's role is to ensure that the high frame rates are achievable without stutter, which its strong benchmark scores support.

Hardware Specifications

AMD Ryzen 7 9850X3D

Cores / Threads 8 / 16
Base Clock 4700 MHz
Boost Clock 5600 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 9070

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2520 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9850X3D + AMD Radeon RX 9070 in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 114.0
3840x2160 Medium 81.0
3840x2160 High 57.0
3840x2160 Ultra 54.0
2560x1440 Low 219.0
2560x1440 Medium 155.0
2560x1440 High 109.0
2560x1440 Ultra 104.0
1920x1080 Low 346.0
1920x1080 Medium 245.0
1920x1080 High 173.0
1920x1080 Ultra 165.0

Pc Building Simulator with Ryzen 7 9850X3D + Other GPUs

See how Pc Building Simulator performs with the same CPU but different graphics cards.

Pc Building Simulator with RX 9070 + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with Ryzen 7 9850X3D + RX 9070

Explore FPS benchmarks for other games using this same hardware combination.