Archeage
This combination provides smooth gameplay with an average of 99 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 46 | 68 | 76 |
| 1440p QHD | 55 | 81 | 119 | 134 |
| 1080p Full HD | 82 | 120 | 177 | 198 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 9850X3D + AMD Radeon RX 9070, In-Depth Analysis
# Archeage with AMD Ryzen 7 9850X3D + AMD Radeon RX 9070
The AMD Ryzen 7 9850X3D paired with the AMD Radeon RX 9070 delivers a distinctly mixed performance profile in Archeage, a 2014 MMORPG that remains heavily dependent on single-threaded CPU throughput. Across the twelve measured configurations, frame rates swing from a minimum of 32 FPS at 4K Ultra to a maximum of 198 FPS at 1080p Low, revealing that this combination's behavior is governed by dramatically different bottlenecks depending on resolution and preset. The data shows a system that is overwhelmingly CPU-bound at lower resolutions, GPU-bound at 4K with demanding settings, and caught in a transitional zone at 1440p where neither component fully saturates. This analysis breaks down the measured results to clarify where the limiting factor lies and what users can expect from each setting tier.
Resolution Scaling
Resolution scaling in Archeage on this hardware follows a predictable but steep curve. At 1080p Low, the system achieves 198 FPS; moving to 1440p Low drops that to 134 FPS, a reduction of 32.3%; at 4K Low, the average falls to 76 FPS, another 43.3% drop from 1440p. This pattern indicates that even at Low settings, the GPU begins to exert significant influence as pixel count rises, though the absolute frame rates remain high enough to suggest the CPU still has headroom at 1080p. The scaling from 1080p to 4K at Low settings is a 61.6% overall reduction, which is substantial but not catastrophic for an MMORPG.
The High preset tells a similar story with steeper absolute declines. From 120 FPS at 1080p, the average drops to 81 FPS at 1440p (a 32.5% reduction) and then to 46 FPS at 4K (a 43.2% reduction from 1440p). The consistency of these percentage drops across Low and High presets — both hovering around 32% for the 1080p-to-1440p step and 43% for the 1440p-to-4K step — suggests that resolution scaling is relatively uniform regardless of graphical load. This uniformity points to the GPU as the primary scaling factor, since CPU load does not increase proportionally with pixel count in a 2014 title.
Ultra settings amplify the resolution penalty dramatically. At 1080p Ultra, the system manages 82 FPS; at 1440p Ultra, that falls to 55 FPS (a 32.9% drop); at 4K Ultra, the average collapses to 32 FPS (a 41.8% drop from 1440p). The 4K Ultra result of 32 FPS is the single lowest measured value across all configurations, and the scaling from 1080p to 4K at Ultra represents a 61.0% reduction. This near-linear degradation with pixel count at all presets indicates that the RX 9070's rendering pipeline is the dominant constraint at higher resolutions, while the CPU's influence is most visible at 1080p where frame rates exceed what the GPU can sustain at higher pixel densities.
CPU Role
The AMD Ryzen 7 9850X3D is an 8-core, 16-thread processor built on the Zen 5 architecture using a 4 nm process, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. Its L3 cache totals 96 MB shared across all cores, and it supports DDR5 memory with dual-channel bandwidth of 89.6 GB/s. In Archeage, a game released in 2014 with a heavily single-threaded engine, the CPU's raw clock speed matters more than its core count, and the data reflects this. The 9850X3D's single-core Cinebench R23 score of 2228 places it in the 92nd percentile among all CPUs, and its average benchmark score of 58386 is nearly identical to its nearest rival, the Intel Xeon Platinum 8260M, which scores 58323 (a 0.1% delta).
The CPU's role is most apparent when comparing 1080p results across presets. At 1080p Low, the system hits 198 FPS; at 1080p High, it reaches 120 FPS; at 1080p Ultra, it falls to 82 FPS. The gap between Low and High at the same resolution is 78 FPS, which suggests that the GPU is not the sole limiting factor at 1080p — otherwise, the difference between presets would be smaller. Instead, the CPU's strong single-thread performance (Cinebench R15 single-core score of 343) allows it to feed the GPU rapidly at Low settings, but the engine's draw call overhead and physics calculations still cap performance. The 82 FPS at 1080p Ultra versus 120 FPS at 1080p High (a 31.7% drop) demonstrates that the CPU cannot fully compensate for the increased GPU workload, even at a resolution where the GPU should theoretically be less stressed.
At 4K, the CPU's influence diminishes relative to the GPU. The 4K Low result of 76 FPS versus the 4K High result of 46 FPS (a 39.5% drop) shows that the GPU is the primary bottleneck at that resolution, since the CPU's workload does not change with resolution. The 9850X3D's multi-threaded capabilities (Cinebench R23 multi-core score of 22807) are largely underutilized in this title, as Archeage rarely scales beyond a few threads. The PassMark multithread score of 41318 and physics score of 4171 confirm that the CPU has ample headroom for modern workloads, but this MMORPG's 2014 engine cannot leverage it effectively.
FAQ
Q: What is the highest average FPS achievable with this CPU-GPU combo in Archeage?
A: The highest measured average FPS is 198, achieved at 1920x1080 with Low settings. The next highest is 177 FPS at 1080p Medium, followed by 134 FPS at 1440p Low.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 7 9850X3D has an average benchmark score of 58386. Its nearest rival, the Intel Xeon Platinum 8260M, scores 58323 (0.1% higher), while the Intel Xeon w5-2545 scores 58504 (0.2% lower). The Intel Core i9-14900 scores 58115 (0.5% lower), and the AMD Ryzen AI 9 HX 470 scores 58826 (0.7% higher).
Q: Is the GPU's performance percentile favorable for this game?
A: The RX 9070 sits in the 69th percentile among all GPUs with an average benchmark score of 23877. Its nearest rival, the NVIDIA GeForce GTX TITAN Z, scores 23736 (0.6% lower), while the AMD Radeon RX 6800S scores 24063 (0.8% higher).
Q: What is the most demanding measured configuration, and what FPS does it produce?
A: The most demanding configuration is 3840x2160 with Ultra settings, which produces an average FPS of 32. This is the lowest measured result across all resolution and preset combinations.
Q: How does the combo rank among all tested combinations in Archeage?
A: This combo ranks 801st out of 2761 tested combinations, placing it in the top 29% of all configurations tested for this game.
Q: What is the difference between Low and Ultra at 1440p?
A: At 2560x1440, Low settings produce 134 FPS while Ultra produces 55 FPS, a difference of 79 FPS. The Medium preset sits between them at 119 FPS.
How This Combo Ranks
The combination of the Ryzen 7 9850X3D and RX 9070 ranks 801st out of 2761 tested combos in Archeage, placing it in the top 29% of all configurations. This rank reflects the fact that Archeage's 2014 engine does not scale well with modern high-end hardware, particularly when compared to other games that may benefit more from the CPU's large L3 cache or the GPU's RDNA 4.0 architecture. The RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth are far more than this game requires, yet the measured frame rates at 4K Ultra (32 FPS) suggest that raw memory bandwidth does not translate directly into performance for this workload.
Compared to the GPU's nearest rivals, the RX 9070's average benchmark score of 23877 is within 1.2% of the NVIDIA GeForce RTX 2080 SUPER (which scores 24170) and within 0.8% of the AMD Radeon RX 6800S (which scores 24063). This clustering indicates that the GPU's performance tier is well-established, and the 801st rank in Archeage is consistent with a mid-upper-tier GPU paired with a top-tier CPU. The CPU's 92nd percentile ranking (average score 58386) is substantially higher than the GPU's 69th percentile, which means the processor is not the limiting factor in most configurations — except at 1080p Low where the CPU's single-thread performance (Cinebench R23 single-core score of 2228) enables 198 FPS.
The 4K Ultra result of 32 FPS is particularly telling for the combo's overall rank. At that setting, the system drops below playable thresholds for many users, and the 55 FPS at 1440p Ultra is only marginally better. These results pull the combo's rank down relative to configurations that may achieve higher frame rates in this specific game, even if those systems feature weaker CPUs or GPUs. The data suggests that Archeage's optimization favors high clock speeds over core counts, and the 9850X3D's 5.60 GHz boost clock is the primary reason the combo performs as well as it does at lower resolutions.
GPU Role
The AMD Radeon RX 9070 is built on the RDNA 4.0 architecture using a 4 nm process at TSMC, with 53,900 million transistors on a 357 mm² die. Its base clock is 1330 MHz, with a boost clock of 2520 MHz and a game clock of 2070 MHz. The GPU features 16 GB of GDDR6 memory on a 256-bit bus, yielding a memory bandwidth of 644.6 GB/s. With 3584 shading units, 224 texture mapping units, and 128 render output units, the RX 9070 delivers a pixel rate of 322.6 GPixel/s and a texture rate of 564.5 GTexel/s. Its FP32 performance is rated at 36.13 TFLOPS.
In Archeage, the GPU's role becomes increasingly dominant as resolution rises. At 1080p Low, the system achieves 198 FPS, which is likely near the engine's frame rate ceiling given the CPU's single-thread performance. However, at 4K Low, the average drops to 76 FPS — a 61.6% reduction that cannot be attributed to CPU limitations, since the CPU workload is resolution-independent. This indicates that the RX 9070's rendering pipeline, particularly its pixel throughput and memory bandwidth, becomes the binding constraint at 4K. The 16 GB VRAM capacity is more than sufficient for Archeage, as the game has no texture streaming requirements that would approach this limit, but the GPU's compute capabilities (FP32 of 36.13 TFLOPS) are only partially utilized due to the game's age.
The GPU's benchmark scores reflect its mid-upper-tier positioning. Its 3DMark Steel Nomad DX12 score of 6290 and PassMark G3D score of 25381 are consistent with its 69th percentile ranking. The nearest rivals — the GTX TITAN Z (0.6% lower), RX 6800S (0.8% higher), RTX 3080 Mobile (1.1% higher), and RTX 2080 SUPER (1.2% higher) — all sit within a narrow performance band, suggesting that the RX 9070 is a well-balanced card for modern titles but faces stiff competition from both older and newer architectures. In Archeage, the GPU's behavior at 4K Ultra (32 FPS) versus 4K Low (76 FPS) shows a 57.9% performance swing, which is a larger relative difference than at 1080p (198 FPS Low vs. 82 FPS Ultra, a 58.6% swing), indicating that the GPU's efficiency scales consistently across resolutions even as absolute frame rates decline.
Measured FPS Breakdown
The measured FPS data covers twelve configurations across three resolutions and four presets, with Medium settings providing the only min/max frame rate data.
At 3840x2160, the results are as follows: Low settings produce an average of 76 FPS; Medium produces 68 FPS with a minimum of 58 and maximum of 78; High produces 46 FPS; Ultra produces 32 FPS. The spread from Low to Ultra is 44 FPS, with the largest single-step drop occurring between Medium and High (22 FPS, a 32.4% reduction). The Medium preset's min/max range of 58–78 FPS indicates some frame time variance, but the average of 68 FPS is stable enough for playable performance.
At 2560x1440, Low settings achieve 134 FPS; Medium achieves 119 FPS with a minimum of 101 and maximum of 137; High achieves 81 FPS; Ultra achieves 55 FPS. The gap between Low and Medium is 15 FPS (11.2%), while the gap between Medium and High is 38 FPS (31.9%). This suggests that the Medium-to-High transition introduces a significant graphical workload increase — likely related to shadow quality or draw distance — that disproportionately impacts the GPU. The Ultra preset at 55 FPS is the second-lowest 1440p result, trailing High by 26 FPS (32.1%).
At 1920x1080, Low settings produce 198 FPS; Medium produces 177 FPS with a minimum of 150 and maximum of 203; High produces 120 FPS; Ultra produces 82 FPS. The Low-to-Medium drop is 21 FPS (10.6%), while the Medium-to-High drop is 57 FPS (32.2%), and the High-to-Ultra drop is 38 FPS (31.7%). The 1080p Medium result of 177 FPS is notable because it exceeds the 1440p Low result of 134 FPS by 43 FPS, demonstrating that resolution has a larger impact on performance than preset at lower settings. The maximum FPS of 203 at 1080p Medium is the highest single measurement recorded, though it is only 2.5% above the average of 198 FPS at 1080p Low.
Settings Recommendations
For users prioritizing high refresh rate gameplay at 1080p, the Low preset delivers the highest average FPS at 198, but the Medium preset at 177 FPS offers a better experience by providing additional graphical fidelity while only sacrificing 10.6% performance. The Medium preset also benefits from a documented min/max range of 150–203 FPS, which indicates consistent frame pacing. At 1080p High, the 120 FPS average is still smooth for most displays, but the 82 FPS at Ultra represents a significant drop that may not justify the visual improvements in a 2014 MMORPG.
At 1440p, the Medium preset at 119 FPS is the recommended choice for balanced performance, as it maintains frame rates above 100 FPS while the min/max range of 101–137 FPS confirms stability. The High preset at 81 FPS is acceptable for 60 Hz displays, but the 38 FPS drop from Medium to High suggests that the graphical changes are disproportionately expensive. The Ultra preset at 55 FPS is playable but approaches the threshold where input lag becomes noticeable in a game that requires rapid targeting and ability rotation.
At 4K, the Low preset at 76 FPS is the only configuration that consistently exceeds 60 FPS, making it the recommended choice for 4K play. The Medium preset at 68 FPS is also viable, with a min/max range of 58–78 FPS that occasionally dips below 60 FPS. The High preset at 46 FPS and Ultra at 32 FPS are not recommended for competitive play, as the frame rates fall below smooth thresholds and the game's engine does not benefit sufficiently from the higher settings to justify the performance cost. Given that Archeage is an MMORPG with large-scale battles where frame rates can fluctuate, the Medium preset at 4K provides the best compromise between visual quality and playable performance, while 1080p Medium offers the most consistent high-frame-rate experience across the board.
Hardware Specifications
AMD Ryzen 7 9850X3D
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + AMD Radeon RX 9070 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 76.0 |
| 3840x2160 | Medium | 68.0 |
| 3840x2160 | High | 46.0 |
| 3840x2160 | Ultra | 32.0 |
| 2560x1440 | Low | 134.0 |
| 2560x1440 | Medium | 119.0 |
| 2560x1440 | High | 81.0 |
| 2560x1440 | Ultra | 55.0 |
| 1920x1080 | Low | 198.0 |
| 1920x1080 | Medium | 177.0 |
| 1920x1080 | High | 120.0 |
| 1920x1080 | Ultra | 82.0 |
Archeage with Ryzen 7 9850X3D + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 9070 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.