Pc Building Simulator

Pc Building Simulator is a simulation title that places unusual demands on a system, and the measured data for the AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 5090 D reveals a fascinating performance profile. This combination, ranked 6th out of 3723 tested combos, demonstrates that the game's engine scales in unexpected ways, often favoring CPU throughput over raw GPU muscle. The benchmark results show a system that can deliver extraordinarily high frame rates at 1080p, but the pattern of performance degradation across resolutions and settings tells a story about where the true bottleneck lies in this particular title.

Resolution Scaling

The measured FPS data from 1080p to 4K reveals a performance curve that is far from linear, indicating a complex interplay between the CPU and GPU. At 1080p with Low settings, the combo achieves a staggering 474 FPS, which drops to 358 FPS at 1440p and further to 187 FPS at 4K. This represents a 60% reduction in frame rate from 1080p to 4K at Low settings, suggesting that while the GPU is being pushed harder at higher resolutions, the CPU is still capable of feeding it enough data to maintain high performance.

However, the scaling pattern changes dramatically when looking at Ultra settings. At 1080p Ultra, the system produces 270 FPS, which falls to 171 FPS at 1440p and 89 FPS at 4K. The percentage drop from 1080p to 4K at Ultra is 67%, which is steeper than the 60% drop seen at Low settings. This indicates that at higher quality presets, the additional shading and texture work creates a more significant GPU load, though the absolute frame rates remain exceptionally high even at 4K Ultra.

The most revealing data point comes from the Medium preset, which is the only one with recorded min and max FPS values. At 1080p Medium, the average is 402 FPS with a minimum of 342 FPS and maximum of 462 FPS. At 1440p Medium, the average drops to 254 FPS with min/max of 216/292 FPS, and at 4K Medium, the average is 133 FPS with min/max of 113/153 FPS. The consistency of the frame times, as evidenced by the relatively narrow gap between min and max at each resolution, suggests that the game is not experiencing severe stuttering or frame pacing issues, even when the GPU is heavily loaded.

The resolution scaling analysis points to a system that is primarily CPU-limited at 1080p, where the RTX 5090 D has ample headroom to render frames as fast as the Ryzen 7 9700F can issue draw calls. As resolution increases, the GPU becomes more of a limiting factor, but even at 4K Ultra, the 89 FPS average indicates that this combination is more than capable of delivering a smooth experience on high-refresh-rate 4K displays. The data suggests that the game engine's simulation logic, which relies heavily on CPU single-thread performance, creates a ceiling that prevents the GPU from being fully utilized at lower resolutions.

CPU Role

The AMD Ryzen 7 9700F is an 8-core, 16-thread processor built on the Zen 5 architecture with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. Its PassMark single-thread score of 4691 and multithread score of 36470 place it in the 94th percentile of all CPUs, with an average benchmark score of 69996. The CPU's nearest rival, the AMD Ryzen 9 7940HX, scores 69875, which is a negligible 0.2% difference, while the Intel Core i7-14700KF trails by 0.2% with a score of 70163.

In the context of Pc Building Simulator, the CPU's role appears to be paramount. The game's simulation-heavy nature means that each frame requires significant processing to calculate component compatibility, thermal dynamics, and system performance metrics. The 5.50 GHz boost clock is particularly relevant here, as the game's logic likely benefits from high single-thread performance to process these calculations quickly. The fact that the combo achieves 474 FPS at 1080p Low, where GPU load is minimal, suggests that the CPU is the primary driver of frame rate at lower resolutions.

The L3 cache of 32 MB shared across all cores provides a substantial pool of fast memory for the game's frequently accessed data structures, while the dual-channel DDR5 memory support with 89.6 GB/s bandwidth ensures that the CPU can quickly retrieve and process information. The 4 nm process node from TSMC, with 8,315 million transistors on a 70.6 mm² die, contributes to the CPU's efficiency, though the 65W TDP is remarkably low for a processor with this level of performance. This efficiency may explain why the CPU can sustain high boost clocks without thermal throttling, which is critical for maintaining consistent frame rates in a simulation game that demands continuous processing.

Settings Recommendations

The measured data provides clear guidance on which preset offers the best balance of visual quality and performance for this combo. At 4K, the Medium preset delivers an average of 133 FPS with a minimum of 113 FPS, which is significantly smoother than the High preset's 94 FPS or the Ultra preset's 89 FPS. The jump from Medium to High at 4K costs 39 FPS (from 133 to 94), representing a 29% performance penalty for what is likely a modest visual improvement in a simulation game where textures and effects are not the primary focus.

At 1440p, the Medium preset's 254 FPS average with a 216 FPS minimum is more than sufficient for any high-refresh-rate monitor, and it provides 75 FPS more than the High preset's 179 FPS. The Ultra preset at 1440p still delivers a very playable 171 FPS, but the extra 83 FPS from Medium (254 vs 171) makes the lower preset the more sensible choice for competitive or fast-paced play. For 1080p, even the Ultra preset's 270 FPS is far beyond what any display can show, so the choice of preset there is purely about visual preference rather than performance necessity.

The data strongly suggests that Medium is the sweet spot for this game and this hardware combination. It maintains frame rates that are 41% higher than High at 4K (133 vs 94) and 42% higher at 1440p (254 vs 179), while the min FPS values indicate that the frame pacing remains consistent. The Low preset does offer even higher frame rates, but the visual compromise is likely not worth the additional performance, especially since the game's simulation nature means that the interface and system monitoring tools are more important than graphical fidelity.

How This Combo Ranks

The combination of AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5090 D achieves a rank of 6 out of 3723 tested combos in Pc Building Simulator, placing it in the top 0.16% of all configurations. This exceptional ranking is notable because the GPU's average benchmark score of 77712 places it in the 92nd percentile of all GPUs, while the CPU's 69996 average score is in the 94th percentile. The fact that this combo ranks higher than either component's individual percentile suggests that the synergy between the 8-core Zen 5 processor and the Blackwell 2.0 GPU is particularly well-suited to this game's workload.

The ranking becomes more impressive when considering the GPU's nearest rivals. The RTX 5090 D's average score of 77712 is just 1.1% ahead of the AMD Radeon RX 6650M XT (76904) and 1.6% behind the AMD Radeon RX 6850M XT (78940). Despite these relatively close benchmark scores, the combo's rank of 6 suggests that the RTX 5090 D's specific architectural features, such as its 104.8 TFLOPS FP32 performance and 1.79 TB/s memory bandwidth, are leveraged more effectively in this game than in synthetic benchmarks. The 32 GB of GDDR7 memory on a 512-bit bus may also play a role, as Pc Building Simulator likely loads many texture and model assets for the various PC components that can be placed in the build.

GPU Role

The NVIDIA GeForce RTX 5090 D is a massive GPU with 21,760 shading units, 680 TMUs, and 176 ROPs, built on the Blackwell 2.0 architecture using a 5 nm process from TSMC. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, while the base clock of 2017 MHz and boost clock of 2407 MHz deliver 104.8 TFLOPS of FP32 compute. The GPU's PassMark G3D score of 44065 and DirectX 12 score of 219 indicate strong raw performance, though its percentile ranking of 92nd among all GPUs is slightly lower than the CPU's 94th percentile.

In Pc Building Simulator, the GPU's role is somewhat unusual compared to typical games. The measured FPS data shows that at 1080p Low, the combo achieves 474 FPS, which is 2.5 times the 4K Low result of 187 FPS. This massive scaling difference indicates that the GPU is not the primary bottleneck at lower resolutions, as the CPU is capable of driving frame rates well beyond what most displays can show. However, at 4K Ultra, the 89 FPS average suggests that the GPU's pixel fill rate and memory bandwidth become more significant constraints, though the 423.6 GPixel/s pixel rate and 1,636.8 GTexel/s texture rate are still substantial.

The GPU's 170 ray tracing cores and 680 tensor cores are unlikely to be heavily utilized in a simulation game that focuses on system building rather than real-time 3D rendering, but the 176 ROPs ensure that final pixel output is handled efficiently. The 575W TDP and 950W suggested PSU indicate that this is a power-hungry component, but the measured frame rates show that the power is being put to good use, especially in maintaining high minimum FPS values at Medium settings across all resolutions.

Measured FPS Breakdown

At 4K resolution, the combo delivers an average of 94 FPS on High settings, 187 FPS on Low, 133 FPS on Medium (with min/max of 113/153 FPS), and 89 FPS on Ultra. The gap between High (94 FPS) and Ultra (89 FPS) is only 5 FPS, suggesting that the visual difference between these presets is minimal in terms of performance impact, while the jump from Low to Medium costs 54 FPS (from 187 to 133). The Medium preset's min FPS of 113 is particularly notable, as it ensures that even the most demanding scenes in the game do not drop below 100 FPS at 4K.

Moving to 1440p, the performance scales upward significantly. High settings produce 179 FPS, Low produces 358 FPS, Medium produces 254 FPS (with min/max of 216/292 FPS), and Ultra produces 171 FPS. The pattern here shows that the Medium preset's min FPS of 216 is higher than the Ultra preset's average of 171, meaning that choosing Medium over Ultra at 1440p results in consistently smoother gameplay with a 48% higher average frame rate (254 vs 171). The Low preset at 1440p even exceeds the 4K Low result by 91% (358 vs 187), highlighting how resolution scaling impacts GPU load.

At 1080p, the frame rates become almost absurdly high. Low settings yield 474 FPS, Medium produces 402 FPS (with min/max of 342/462 FPS), High delivers 284 FPS, and Ultra still manages 270 FPS. The min FPS of 342 at Medium is higher than the average FPS of many other systems at 1080p, demonstrating that this combo is massively overqualified for 1080p gaming. The difference between High (284 FPS) and Ultra (270 FPS) is only 14 FPS, or about 5%, indicating that the GPU has enough headroom at this resolution to handle the increased visual effects of Ultra without significant penalty.

FAQ

Q: What is the overall performance ranking of this CPU and GPU combination in Pc Building Simulator?

A: The combo ranks 6th out of 3723 tested combinations, placing it in the top 0.16% of all configurations tested for this game.

Q: How does the Ryzen 7 9700F compare to its nearest CPU rivals?

A: The Ryzen 7 9700F scores 69996 on average, which is 0.2% higher than the AMD Ryzen 9 7940HX (69875) and 0.2% lower than the Intel Core i7-14700KF (70163). It also leads the AMD Ryzen 9 7950X (69515) by 0.7% and the Intel Core i7-14700K (69355) by 0.9%.

Q: What is the best settings preset to use at 4K resolution?

A: The Medium preset offers the best experience, delivering an average of 133 FPS with a minimum of 113 FPS. This is 41% faster than High (94 FPS) and 49% faster than Ultra (89 FPS) while maintaining consistent frame pacing.

Q: Is the CPU or GPU the limiting factor at 1080p resolution?

A: The CPU is the primary limiting factor at 1080p, as evidenced by the 474 FPS on Low settings versus 270 FPS on Ultra. The GPU has significant headroom at this resolution, and frame rates are constrained by the Ryzen 7 9700F's single-thread performance and simulation calculation speed.

Q: How much VRAM does the RTX 5090 D have and what is its memory bandwidth?

A: The GPU features 32 GB of GDDR7 memory on a 512-bit bus, providing 1.79 TB/s of memory bandwidth. This is more than sufficient for Pc Building Simulator's asset loading requirements.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 1440p, Low settings produce 358 FPS while Ultra produces 171 FPS, representing a 109% performance difference. The Medium preset sits between these at 254 FPS, offering the best balance of visual quality and performance.