Pc Building Simulator

FAQ

Q: What is the average frame rate for this CPU/GPU combo in Pc Building Simulator at 1080p Ultra settings?

A: The measured average frame rate at 1920x1080 with Ultra settings is 109.5 FPS, which is slightly below the 110.7 FPS recorded at High settings.

Q: How does the Ryzen 5 2600 compare to its closest rival in overall CPU performance?

A: The AMD Ryzen 5 2600 has an average benchmark score of 19616, placing it 0.6% ahead of the AMD Ryzen 5 7530U (19508) and 0.7% ahead of the Intel Core i7-10700F (19485). It also outperforms the Intel Core i5-1345U by 0.4% (19691) and the Intel Core i5-11600KF by 0.6% (19740).

Q: What is the GPU's performance percentile among all tested graphics cards?

A: The NVIDIA GeForce RTX 3060 Ti sits in the 69th percentile of all GPUs, with an average benchmark score of 25120. Its closest rival, the AMD Radeon RX 6700M, scores 25180, a difference of only 0.2%.

Q: At which resolution does this combo achieve its highest frame rate?

A: The highest average frame rate is 227.8 FPS, achieved at 1920x1080 with Low settings. At 2560x1440 Low settings, the average drops to 140.6 FPS, and at 3840x2160 Low settings, it falls to 73.5 FPS.

Q: How does the combo rank among all tested combinations in this game?

A: The combination of AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3060 Ti ranks 1223 out of 1769 tested combos in Pc Building Simulator, placing it in the lower-middle portion of the field.

Q: What is the memory configuration of the RTX 3060 Ti?

A: The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of memory bandwidth. The memory clock is 1750 MHz, with 14 Gbps effective data rate.

Settings Recommendations

The measured frame rate data in Pc Building Simulator reveals a consistent pattern across resolutions: the gap between Low and Ultra settings is substantial, but the step from High to Ultra yields diminishing returns. At 1920x1080, Low settings produce 227.8 FPS, while Medium drops to 160.9 FPS, High to 110.7 FPS, and Ultra to 109.5 FPS. The difference between High and Ultra is only 1.2 FPS, making Ultra the clear choice for 1080p displays without any meaningful performance penalty.

At 2560x1440, the picture shifts slightly. Low settings deliver 140.6 FPS, Medium 98.6 FPS, High 71.7 FPS, and Ultra 70.1 FPS. Again, the High-to-Ultra delta is minimal at just 1.6 FPS, so Ultra remains the optimal preset here for users with 1440p monitors. The 60 FPS threshold is comfortably exceeded at Ultra, providing a smooth experience.

The 3840x2160 row changes the calculus. Low settings yield 73.5 FPS, Medium 50.9 FPS, High 37.5 FPS, and Ultra 38.1 FPS. Notably, the High and Ultra results are nearly identical, differing by only 0.6 FPS, but both sit below the 40 FPS mark. Medium is the only preset that approaches playable territory at this resolution, though it still falls short of 60 FPS. For 4K gaming, the data suggests Medium is the highest viable preset, with Low being necessary for a more fluid experience above 70 FPS.

Across all resolutions, the data indicates that the most efficient choice is Ultra at 1080p or 1440p, since the performance cost over High is negligible. For 4K, users must accept either the 73.5 FPS of Low or the 50.9 FPS of Medium, as the higher presets do not provide a playable frame rate.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the dominant component in this pairing for Pc Building Simulator, as evidenced by the frame rate scaling across resolutions. The GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth allow it to handle the simulation's asset streaming at 1080p and 1440p without bottlenecking, but the 4K results show where memory capacity becomes a limiting factor.

The GPU's boost clock of 1665 MHz, combined with 4864 shading units, delivers 16.20 TFLOPS of FP32 compute. This raw throughput translates directly into the large frame rate deltas observed when lowering settings. At 1080p, dropping from Ultra to Low more than doubles the average frame rate, from 109.5 FPS to 227.8 FPS. This 118.3 FPS increase suggests the GPU is heavily utilized and benefits significantly from reduced shading complexity.

The RTX 3060 Ti's 38 RT cores and 152 tensor cores are present but largely irrelevant for this simulation title, which does not leverage ray tracing or DLSS in the measured configurations. The GPU's 69th percentile ranking among all tested cards places it in the upper tier, but its nearest rivals—the AMD Radeon RX 6700M (25180), RX 6600 (25235), and Radeon 890M (25246)—are all within 0.7% of its average score, indicating a tightly packed performance cluster.

The 200 W TDP and 550 W suggested PSU are moderate for this class, but the dual-slot cooler and 242 mm length make physical installation straightforward. The 14 Gbps effective memory speed on a 256-bit bus provides the bandwidth needed for the texture-heavy scenes in a PC building simulation, where detailed component models are rendered from multiple angles.

How This Combo Ranks

The combo's rank of 1223 out of 1769 tested combinations places it in the 69th percentile of all CPU/GPU pairings tested in Pc Building Simulator. This position reflects the imbalance between the CPU and GPU components: while the RTX 3060 Ti is a capable mid-range card, the Ryzen 5 2600 is an older processor that holds the combo back from higher placements.

The CPU's average benchmark score of 19616 places it in the 77th percentile of all CPUs, but its nearest rivals—all within 0.7%—show that it is not a standout performer. The GPU's 69th percentile ranking is similarly middling, with its nearest rivals within 0.7% as well. The combination of two mid-pack components results in a lower overall rank than either component achieves individually, suggesting that Pc Building Simulator is sensitive to the weakest link in the system.

The measured frame rates support this interpretation. At 3840x2160 Ultra, the combo produces only 38.1 FPS, which is below the 40 FPS threshold that many users consider minimum for playability. Even at 1440p Ultra, the 70.1 FPS result is respectable but not outstanding, given that many modern combos achieve well over 100 FPS at this resolution. The 1080p Ultra result of 109.5 FPS is the most favorable data point, indicating that this combo is best suited for 1080p gaming or less demanding settings at higher resolutions.

The rank of 1223 out of 1769 means that roughly one-third of tested combos perform worse, but two-thirds perform better. This places the pairing in the lower-middle tier, appropriate for a CPU released in 2018 paired with a GPU released in 2020.

CPU Role

The AMD Ryzen 5 2600 provides six cores and twelve threads, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. This Zen+ architecture processor, built on GlobalFoundries' 12 nm process, has a 65 W TDP and supports DDR4 memory on the AM4 socket. Its 16 MB of shared L3 cache and 512 KB L2 per core provide adequate data locality for the simulation's workload.

In Pc Building Simulator, the CPU's role is secondary to the GPU, but its performance still matters at lower resolutions where frame rates are high. At 1080p Low settings, the combo achieves 227.8 FPS, which likely approaches the CPU's limit for physics and game logic updates. The PassMark single-thread score of 2239 and multi-thread score of 13160 indicate modest single-core performance, which is typical for a 2000-series Ryzen part. The Cinebench R23 scores of 1579 single-core and 11186 multi-core further confirm this assessment.

The CPU's 77th percentile ranking among all CPUs is respectable, but its nearest rivals show how close the competition is. The Intel Core i5-11600KF scores 19740, a 0.6% advantage, while the AMD Ryzen 5 7530U scores 19508, a 0.6% deficit. These tiny margins mean the Ryzen 5 2600 is effectively performance-equivalent to several newer processors in synthetic benchmarks, though its older architecture may show larger gaps in real-world gaming scenarios.

For this simulation game, the CPU's 12 threads are sufficient to handle the background systems, such as component pricing, thermal calculations, and customer interactions, without bottlenecking. The dual-channel memory bus with 46.9 GB/s bandwidth is adequate for the game's memory access patterns, and the 16 PCIe Gen 3 lanes provide enough bandwidth for the RTX 3060 Ti, which uses a PCIe 4.0 interface but is backward compatible. The CPU's 65 W TDP and unlocked multiplier offer headroom for overclocking, which could improve performance in CPU-limited scenarios, though the measured data does not include overclocked results.