Palworld
This combination provides smooth gameplay with an average of 75 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 33 | 43 | 54 |
| 1440p QHD | 50 | 63 | 82 | 101 |
| 1080p Full HD | 71 | 96 | 128 | 152 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 7 5800X + AMD Radeon RX 7600, In-Depth Analysis
Palworld on the AMD Ryzen 7 5800X and AMD Radeon RX 7600 combination shows a clear pattern of scaling that places the burden of performance squarely on the graphics card. The data indicates that as resolution increases, the frame rate drop is significant, which is typical for a system where the GPU is the primary bottleneck. This pairing delivers playable results at 1080p and 1440p but struggles to maintain smooth performance at 4K, particularly at higher graphical presets.
Resolution Scaling
The measured FPS data reveals a steep performance curve as resolution climbs from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 96.2 FPS at 1080p to 62.8 FPS at 1440p, a reduction of roughly 35%. Pushing further to 4K drops the average to 32.9 FPS, which is a 66% decrease from the 1080p baseline. This steep decline indicates that the rendering load is scaling heavily with pixel count, a hallmark of GPU-bound performance.
The pattern holds across all settings presets. At Low settings, the system achieves 151.7 FPS at 1080p, but this falls to 100.8 FPS at 1440p and 54.1 FPS at 4K. The fact that even the lowest settings cannot maintain high frame rates at 4K confirms that the RX 7600's compute and memory capabilities are the limiting factor. The scaling between resolutions is not linear, suggesting that the GPU's 8 GB VRAM and 128-bit memory bus are saturated when addressing the higher pixel counts.
The difference between 1080p and 1440p is less punishing than the jump to 4K. For instance, at Medium settings, the drop from 127.6 FPS at 1080p to 82 FPS at 1440p represents a 36% loss, while moving from 1440p to 4K at the same settings (42.9 FPS) represents a 48% loss. This non-linear degradation points to the GPU hitting a hard resource ceiling at 4K, likely related to memory bandwidth and fill rate.
GPU Role
The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with a Navi 33 chip, and its specifications directly explain the observed frame rates. The GPU has a base clock of 1720 MHz and a boost clock of 2655 MHz, with a game clock of 2250 MHz. These clocks allow for solid 1080p performance, but the 8 GB of GDDR6 memory on a 128-bit bus providing 288.0 GB/s bandwidth becomes a constraint at higher resolutions.
The GPU's raw compute figures—21.75 TFLOPS FP32 and a pixel rate of 169.9 GPixel/s—are adequate for 1080p gaming but insufficient for 4K at high settings. The measured data shows that at 4K Ultra, the average FPS falls to 28.8, which is below playable thresholds. This aligns with the GPU's 63rd percentile ranking among all GPUs, indicating it is a mid-range part not designed for extreme resolutions.
The VRAM capacity is particularly relevant in Palworld, a survival game with large open environments. The 8 GB buffer is likely filled quickly at 4K with High or Ultra textures, causing the frame rate to plummet. The 128-bit memory bus further limits the data transfer rate, making the card more suited to 1080p where the bandwidth demands are lower. The GPU's nearest rivals, such as the AMD Radeon RX 7600 XT with a deltaPct of 0.6, show that the RX 7600 is closely matched with its immediate successor in synthetic benchmarks, but the real-world scaling here shows its limits.
CPU Role
The AMD Ryzen 7 5800X provides a robust foundation for this gaming configuration. With 8 cores and 16 threads running on the Zen 3 architecture (Vermeer), the CPU has a base clock of 3.80 GHz and a boost clock of 4.70 GHz. This processing power is more than sufficient to feed the RX 7600 at 1080p, as evidenced by the high frame rates at lower resolutions.
The CPU's benchmark scores reinforce its capability. In Cinebench R23, it scores 23571 in multi-core and 3327 in single-core, placing it in the 84th percentile among all CPUs. The 3DMark 16-thread score of 7586 shows strong multi-threaded performance, which is beneficial for Palworld's simulation and world-building mechanics. However, the data suggests the CPU is not the bottleneck in this pairing. The frame rate drops from 1080p to 4K are almost entirely driven by GPU limitations, not CPU processing.
At 1080p Low, the system reaches 151.7 FPS, which is likely near the CPU's practical limit for this game's engine. The fact that the same settings at 1440p produce 100.8 FPS and 4K produces 54.1 FPS indicates that the CPU is not holding back performance; otherwise, the frame rates would plateau rather than drop. The 5800X's nearest rivals, including the AMD Ryzen 7 5800 (deltaPct 0.3) and the AMD Ryzen 5 8500GE (deltaPct -0.4), show that this chip is well-positioned in the market, but its role here is to enable the GPU to work to its full potential.
Measured FPS Breakdown
At 1920x1080, the system performs admirably across all settings. Low settings yield an average of 151.7 FPS, Medium produces 127.6 FPS, High delivers 96.2 FPS, and Ultra drops to 70.7 FPS. These numbers indicate that 1080p gaming is smooth even at the highest preset, with the frame rate staying well above 60 FPS.
Moving to 2560x1440, the frame rates remain respectable but show the GPU's strain. Low settings average 100.8 FPS, Medium drops to 82 FPS, High falls to 62.8 FPS, and Ultra averages 49.9 FPS. The Ultra preset at 1440p is borderline playable, but the drop below 50 FPS suggests that users may need to adjust settings for a consistent experience.
At 3840x2160, the performance is challenging. Low settings average 54.1 FPS, which is technically playable but not ideal. Medium drops to 42.9 FPS, High falls to 32.9 FPS, and Ultra averages just 28.8 FPS. These numbers clearly show that 4K gaming is not viable at higher settings with this combination, and even Low settings hover near the edge of acceptable smoothness. The data across all resolutions shows a consistent pattern: the RX 7600 is a 1080p-class card that can handle 1440p with compromises, but 4K is out of reach for demanding settings.
How This Combo Ranks
In the database of tested combinations, this setup ranks 1180 out of 1718 combos, placing it in the lower third of all configurations. This ranking reflects the mid-range nature of both components. The CPU's 84th percentile ranking is high, but the GPU's 63rd percentile pulls the overall combo down. The rank suggests that while this pairing is competent for mainstream gaming, it is not competitive with higher-end configurations that pair stronger GPUs with this CPU.
The combo's ranking is influenced by the GPU's limitations at higher resolutions. Since Palworld is a demanding title, the 1180th position out of 1718 indicates that many other tested systems outperform this one in this specific game. However, the ranking does not account for cost or power efficiency, and the 5800X's strong CPU performance means that users could upgrade the GPU later without changing the processor.
FAQ
Q: What is the best resolution for this combo in Palworld?
A: The data shows that 1920x1080 is the optimal resolution, with all settings presets achieving over 70 FPS. At 2560x1440, only Low and Medium settings stay above 80 FPS, while 3840x2160 struggles to reach 55 FPS even at Low.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 7 5800X has an average benchmark score of 27606, which is 0.3% higher than the AMD Ryzen 7 5800 (27535) and 0.4% higher than the AMD Ryzen 5 8500GE (27708). It is 0.8% ahead of the Intel Core i5-12600KF (27827) in average score.
Q: Is 8 GB of VRAM sufficient for Palworld?
A: Based on the measured FPS, 8 GB is adequate for 1080p and 1440p at most settings, but the steep drop at 4K suggests VRAM capacity or bandwidth becomes a limiting factor at that resolution.
Q: What is the GPU's performance percentile?
A: The AMD Radeon RX 7600 ranks in the 63rd percentile among all GPUs, indicating it is a mid-range part that outperforms a majority of cards but lags behind higher-tier options.
Q: Does the CPU bottleneck the GPU at 1080p?
A: No, the data shows that frame rates scale down consistently from 1080p to 4K, which indicates the GPU is the limiting component. The CPU's high single-thread score of 3327 in Cinebench R23 suggests it can keep up with the GPU's demands.
Q: What is the combo's overall ranking?
A: This combination ranks 1180 out of 1718 tested combos for Palworld, placing it in the lower third of all configurations tested for this game.
Hardware Specifications
AMD Ryzen 7 5800X
AMD Radeon RX 7600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X + AMD Radeon RX 7600 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 54.1 |
| 3840x2160 | Medium | 42.9 |
| 3840x2160 | High | 32.9 |
| 3840x2160 | Ultra | 28.8 |
| 2560x1440 | Low | 100.8 |
| 2560x1440 | Medium | 82.0 |
| 2560x1440 | High | 62.8 |
| 2560x1440 | Ultra | 49.9 |
| 1920x1080 | Low | 151.7 |
| 1920x1080 | Medium | 127.6 |
| 1920x1080 | High | 96.2 |
| 1920x1080 | Ultra | 70.7 |
Palworld with Ryzen 7 5800X + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 7600 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X + RX 7600
Explore FPS benchmarks for other games using this same hardware combination.