Palworld

Palworld

AVERAGE FPS
112
good

This combination provides smooth gameplay with an average of 112 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 51 69 82
1440p QHD 70 96 121 153
1080p Full HD 107 145 187 230

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 82
3840x2160 Medium 69
3840x2160 High 51
3840x2160 Ultra 39
2560x1440 Low 153
2560x1440 Medium 121
2560x1440 High 96
2560x1440 Ultra 70
1920x1080 Low 230
1920x1080 Medium 187
1920x1080 High 145
1920x1080 Ultra 107

Palworld with AMD Ryzen 5 8400F + AMD Radeon RX 6800 XT, In-Depth Analysis

Resolution Scaling

The measured FPS data for Palworld with the AMD Ryzen 5 8400F and AMD Radeon RX 6800 XT reveals a clear pattern: the game scales heavily with resolution, and the GPU becomes the dominant limiting factor as pixel count rises. At 1080p with Low settings, the combo delivers 230 FPS, but at 4K Ultra, that figure collapses to 38.5 FPS — a drop of roughly 83% from the lowest-stress scenario to the highest.

Looking at the progression across resolutions at High settings, the frame rate moves from 144.6 FPS at 1080p to 95.6 FPS at 1440p, then down to 50.6 FPS at 4K. The step from 1080p to 1440p costs about 34% of performance, while the move from 1440p to 4K costs another 47%. This steepening decline is typical of a GPU-bound workload at higher resolutions, where the RX 6800 XT's raw throughput is stretched thinner.

The Low preset tells a similar story but with higher absolute numbers: 230 FPS at 1080p, 152.7 FPS at 1440p, and 81.6 FPS at 4K. The fact that 4K Low still produces over 80 FPS indicates that the GPU has substantial headroom when graphical effects are minimized, but the resolution scaling remains steep regardless of settings.

At 4K, the gap between Low and High is 31 FPS (81.6 to 50.6), while at 1080p that same settings gap is 85.4 FPS (230 to 144.6). This compression at higher resolutions suggests that at 4K, the GPU is so heavily loaded that even lowering settings cannot fully compensate for the pixel count. The data points to the RX 6800 XT being the primary constraint at 4K Ultra, where the 38.5 FPS result falls below the 50.6 FPS High preset, showing that Ultra's additional effects exact a heavy toll.

CPU Role

The Ryzen 5 8400F is a 6-core, 12-thread processor based on Zen 4 architecture, with a base clock of 4.20 GHz and a boost clock of 4.70 GHz. Its 16 MB of shared L3 cache and dual-channel DDR5 memory support position it as a modern mid-range CPU, but in Palworld, the benchmark results indicate that its role is secondary to the GPU at most settings.

The CPU's benchmark scores show solid multi-threaded capacity: Cinebench R23 multicore reaches 20,851 points, and single-core scores 2,943. These numbers put the 8400F in the 82nd percentile among all CPUs, with an average benchmark score of 25,064. Compared to its nearest rivals, it trades blows with the AMD Ryzen 7 2700X (0% delta), comes within 0.1% of the AMD Ryzen AI 5 PRO 340, and trails the AMD EPYC 9474F by 0.2% while edging out the AMD Ryzen 5 7500F by 0.3%.

The 3DMark thread scaling is telling: 2-thread score of 1,874, 4-thread of 3,563, 8-thread of 5,275, and max-thread of 6,165. The jump from 8 to max threads is modest (about 17%), suggesting that Palworld is not heavily utilizing beyond 8 threads. This means that the CPU's 12 threads are not a bottleneck in this title — the game appears to be GPU-bound in most measured scenarios.

At 1080p Low, the combo hits 230 FPS, which is high enough that the CPU's single-thread performance (PassMark single-thread score of 3,684) is sufficient to feed the GPU. However, the data does not show a scenario where CPU limitation produces a plateau across resolutions — instead, FPS scales inversely with resolution, confirming the GPU as the limiting factor. The 4.70 GHz boost clock helps maintain consistent frame delivery, but Palworld's performance ceiling here is set by the RX 6800 XT, not the 8400F.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows 1440p High delivers 95.6 FPS, which is well above the 60 FPS threshold, while 4K High drops to 50.6 FPS. For 4K gaming, Low settings at 81.6 FPS is the only viable option above 60 FPS.

Q: Does the Ryzen 5 8400F bottleneck the RX 6800 XT?

A: Benchmark results indicate no significant CPU bottleneck. At 1080p Low, the combo reaches 230 FPS, and the CPU's 3DMark max-thread score of 6,165 shows adequate headroom. The FPS drops consistently as resolution increases, pointing to GPU limitation.

Q: How much performance is lost going from 1080p to 4K at High settings?

A: The measured FPS falls from 144.6 at 1080p to 95.6 at 1440p, then to 50.6 at 4K. This represents a 65% reduction from 1080p to 4K at High settings.

Q: What FPS can I expect at Ultra settings?

A: Ultra is demanding: 107.4 FPS at 1080p, 70.4 FPS at 1440p, and 38.5 FPS at 4K. Only 1080p Ultra exceeds 60 FPS comfortably.

Q: How does this combo rank among tested systems?

A: It ranks 609th out of 1,718 tested combos for Palworld, placing it in the upper third of all configurations.

Q: Is the RX 6800 XT's 16 GB VRAM sufficient for Palworld?

A: The measured results show no VRAM-related performance collapse at any resolution, as even 4K Ultra produces playable (if low) frame rates of 38.5 FPS. The 16 GB GDDR6 memory with 512.0 GB/s bandwidth supports the high-resolution data.

Measured FPS Breakdown

At 1920x1080, the combo produces a wide range of results depending on settings. Low settings hit 230 FPS, Medium reaches 186.7 FPS, High delivers 144.6 FPS, and Ultra drops to 107.4 FPS. The step from Medium to High costs about 22% performance, while the jump from High to Ultra costs another 26%.

Moving to 2560x1440, the same settings hierarchy holds with lower absolute numbers. Low achieves 152.7 FPS, Medium hits 120.7 FPS, High produces 95.6 FPS, and Ultra falls to 70.4 FPS. At this resolution, even Ultra remains above 60 FPS, making 1440p the sweet spot for high-quality play.

At 3840x2160, the GPU's limits become apparent. Low delivers 81.6 FPS, Medium drops to 69.4 FPS, High falls to 50.6 FPS, and Ultra bottoms out at 38.5 FPS. The gap between Low and Medium at 4K is 12.2 FPS, while the gap between Medium and High is 18.8 FPS — showing that the step to High is disproportionately costly at this resolution.

The settings scaling is consistent: Medium is always roughly 25-30% faster than High at the same resolution, while Low is another 25-30% faster than Medium. Ultra is consistently the slowest preset, with the largest relative penalty appearing at 4K where it is 24% slower than High.

How This Combo Ranks

The Ryzen 5 8400F paired with the RX 6800 XT holds the 609th position out of 1,718 tested combos in Palworld. This places the configuration in the 64th percentile — meaning roughly two-thirds of tested systems rank below it. Given the measured FPS data, this ranking reflects a GPU that is strong but not top-tier, coupled with a CPU that does not impede performance in this title.

The GPU's standalone percentile of 87 versus all GPUs is notably higher than its combo ranking, suggesting that Palworld's demands favor other GPU architectures or that the specific pairing does not fully exploit the RX 6800 XT's capabilities. The GPU's nearest rivals — the Intel Arc A550M (0.5% ahead), NVIDIA RTX A1000 (1.7% behind), NVIDIA CMP 50HX (1.9% ahead), and NVIDIA GeForce RTX 4070 Ti SUPER (2.6% behind) — show that the RX 6800 XT sits in a competitive mid-high tier.

The CPU's ranking of 82nd percentile among all CPUs is similarly strong, but its nearest rivals (Ryzen 7 2700X, Ryzen AI 5 PRO 340, EPYC 9474F, Ryzen 5 7500F) all cluster within 0.3% of its average score, indicating that this processor is not a differentiator in game performance. The combo's 609th rank out of 1,718 is therefore driven primarily by GPU performance, which at 4K Ultra struggles to maintain playable frame rates in this survival title.

Settings Recommendations

For 1080p displays, the data supports using High settings as the default: 144.6 FPS is well above any refresh rate threshold, and the step to Medium (186.7 FPS) only matters for 200Hz+ monitors. Ultra at 107.4 FPS remains playable but offers diminishing returns over High.

At 1440p, High settings at 95.6 FPS is the recommended balance, as it stays above 60 FPS with room to spare. Medium at 120.7 FPS is the choice for high-refresh 1440p panels, while Ultra at 70.4 FPS is acceptable for those prioritizing visual fidelity over frame rate headroom.

For 4K, the data presents a clear trade-off. Low settings at 81.6 FPS is the only preset that clears 60 FPS, making it the recommended option for smooth gameplay. Medium at 69.4 FPS is also viable above 60 FPS, but High at 50.6 FPS and Ultra at 38.5 FPS fall short of the 60 FPS target. The measured data indicates that 4K gaming on this combo requires accepting either Low or Medium settings to maintain fluid motion.

The overall recommendation across all resolutions: Medium or High at 1080p and 1440p, and Medium at 4K for the best balance of visual quality and frame rate. Ultra is only advisable for 1080p users with 120Hz displays who prioritize image quality over responsiveness.

GPU Role

The AMD Radeon RX 6800 XT serves as the primary performance driver in this Palworld configuration, and the data confirms its central role. The GPU features 16 GB of GDDR6 memory on a 256-bit bus, delivering 512.0 GB/s of bandwidth. Its 4,608 shading units, 288 TMUs, and 128 ROPs are paired with clocks of 1825 MHz base, 2015 MHz game, and 2250 MHz boost.

The GPU's benchmark profile shows strong compute capabilities: a PassMark G3D score of 24,980 and a GPU Compute score of 13,245. Its 87th percentile ranking among all GPUs, with an average benchmark score of 49,982, places it above the RTX 4070 Ti SUPER by 2.6% in average score, while slightly trailing the RTX A1000 by 1.7%. This competitive positioning explains why the combo achieves solid frame rates at lower resolutions but struggles at 4K Ultra.

The VRAM capacity of 16 GB does not appear to be a limiting factor in the measured results, as even at 4K Ultra the GPU produces 38.5 FPS without evidence of memory-related stutter or collapse. The 512.0 GB/s bandwidth supports the high-resolution textures Palworld demands, but the compute throughput becomes the bottleneck at 4K Ultra where the game's effects push the GPU to its limits.

The GPU's FP32 performance of 20.74 TFLOPS and pixel rate of 288.0 GPixel/s are substantial, yet the 4K Ultra result of 38.5 FPS shows that Palworld's Ultra preset imposes a heavy load. The RX 6800 XT's end-of-life production status and 300 W TDP indicate it is a previous-generation high-end card that remains competitive, but the data shows it is not sufficient for maxed-out 4K play in this title. The GPU's role is decisive: it sets the ceiling at every resolution, with the CPU providing ample headroom to avoid interference.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6800 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2250 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + AMD Radeon RX 6800 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 81.6
3840x2160 Medium 69.4
3840x2160 High 50.6
3840x2160 Ultra 38.5
2560x1440 Low 152.7
2560x1440 Medium 120.7
2560x1440 High 95.6
2560x1440 Ultra 70.4
1920x1080 Low 230.0
1920x1080 Medium 186.7
1920x1080 High 144.6
1920x1080 Ultra 107.4

Palworld with Ryzen 5 8400F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6800 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + RX 6800 XT

Explore FPS benchmarks for other games using this same hardware combination.