Palworld

Palworld’s open-world survival sandbox stresses systems differently than typical shooters, and the measured results for the AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 5070 reveal a configuration that scales predictably with resolution and settings. The data shows a combo that remains fluid at high refresh rates for 1440p gaming but begins to show its limitations as pixel count and visual fidelity rise.

Resolution Scaling

The frame rate progression from 1080p to 4K follows a steep and consistent curve, indicating a shift in bottleneck as resolution increases. At 1080p with Low settings, the combo produces an average of 271 FPS, which drops to 220.4 FPS at Medium and 166.1 FPS at High. The Ultra preset at 1080p still manages a strong 127.7 FPS. This pattern suggests that at lower resolutions, the CPU and GPU have ample headroom, with the frame rate primarily driven by the graphics card’s ability to push frames quickly.

Moving to 1440p, the averages fall to 175.5 FPS at Low, 144.6 FPS at Medium, and 108.2 FPS at High. The Ultra setting at 1440p delivers 82.3 FPS, a figure that remains comfortably above the 60 FPS threshold for most displays. The scaling from 1080p Low to 1440p Low represents a 35% reduction in frame rate, which is typical for a resolution increase that adds roughly 78% more pixels. This indicates that the GPU is still the primary limiter at these settings, as the CPU has enough single-thread performance to keep up.

At 4K, the situation changes dramatically. The High preset averages 58.8 FPS, while Ultra drops to 43.8 FPS. The Low preset at 4K yields 95.7 FPS, and Medium produces 80.7 FPS. The gap between 1440p High (108.2 FPS) and 4K High (58.8 FPS) is a 46% decline, which is slightly steeper than the pixel count increase would suggest. This hints that the RTX 5070’s 12 GB of GDDR7 memory and 192-bit bus are being taxed heavily at 4K, especially with the higher texture and shading demands of the Ultra preset. The data shows that 4K Ultra is not a realistic target for this combo, as it falls below 45 FPS, but 4K High remains playable if the user tolerates frame rates near 60.

GPU Role

The RTX 5070 is built on the Blackwell 2.0 architecture with 6144 shading units, 192 texture mapping units, and 80 raster output units. Its boost clock of 2512 MHz and base clock of 2325 MHz allow it to sustain high throughput in compute-heavy scenes. The memory subsystem features 12 GB of GDDR7 on a 192-bit bus, delivering 672.0 GB/s of bandwidth. This bandwidth is crucial for Palworld’s large open-world streaming, but the 12 GB capacity appears to be a limiting factor at 4K Ultra, where the average FPS drops to 43.8.

The GPU’s benchmark scores reflect its strong position. It scores 29137 in Passmark G3D and 5077 in 3DMark Steel Nomad DX12, placing it in the 83rd percentile of all GPUs. Its nearest rivals in terms of average benchmark score include the NVIDIA GeForce RTX 3090, which trails by 0.6%, and the AMD Radeon Pro 5300, which is 0.2% ahead. This indicates that the RTX 5070 performs at a level comparable to the previous generation’s flagship, though with a smaller memory pool.

In Palworld specifically, the GPU’s role becomes more pronounced at higher resolutions. The performance delta between Low and Ultra settings at 1080p is 143.3 FPS (from 271 to 127.7), while at 4K the delta is 51.9 FPS (from 95.7 to 43.8). This compression of the settings range at 4K suggests that the GPU is saturating its resources, and the frame rate is increasingly bound by the memory bandwidth and shader throughput. The FP32 performance of 30.87 TFLOPS is sufficient for the game’s physics and rendering, but the 80 ROPs may be a bottleneck for pixel fill at 4K.

CPU Role

The AMD Ryzen 5 8400F is a 6-core, 12-thread processor based on the Zen 4 Phoenix architecture, manufactured on a 4 nm process. It has a base clock of 4.20 GHz and a boost clock of 4.70 GHz, with 16 MB of shared L3 cache. The CPU’s single-thread score in Cinebench R23 is 2943, while its multicore score is 20851. In Passmark, it achieves 3684 in single-thread tests and 24530 in multithreaded tests, placing it in the 82nd percentile of all CPUs.

The CPU’s nearest rivals in average benchmark score include the AMD Ryzen 7 2700X (0% delta) and the AMD Ryzen 5 7500F (0.3% ahead). This shows that the 8400F is competitive with older 8-core parts despite having fewer cores, thanks to its higher IPC from Zen 4. In Palworld, the CPU’s role is most evident at lower resolutions where the GPU is not fully taxed. At 1080p Low, the combo hits 271 FPS, which suggests the CPU can feed the GPU effectively. However, the single-thread score of 951 in 3DMark indicates that very high frame rates above 200 FPS may start to feel CPU-limited in certain scenes.

The CPU’s memory bandwidth of 83.2 GB/s over a dual-channel DDR5 interface is adequate for the game’s streaming needs, but it is not a standout figure. The 4.70 GHz boost clock helps in maintaining consistent frame pacing, as Palworld’s open-world simulation requires frequent draw calls and AI updates. The data shows that the CPU does not bottleneck the GPU at 4K, where the frame rates are much lower, but at 1080p, the margin between CPU and GPU headroom narrows.

FAQ

Q: How does this combo perform at 1080p with High settings?

A: The average frame rate is 166.1 FPS, which is well above the refresh rate of most standard monitors. This suggests the GPU is the primary limiter, but the CPU has enough headroom to maintain high frame rates.

Q: What is the frame rate at 4K Ultra?

A: The average is 43.8 FPS, which is below the 60 FPS target for smooth gameplay. Users aiming for 4K will need to lower settings to High (58.8 FPS) or Medium (80.7 FPS) to achieve playable frame rates.

Q: Is this combo better for 1440p or 4K gaming?

A: The data clearly favors 1440p, where the High preset achieves 108.2 FPS and even Ultra reaches 82.3 FPS. At 4K, only the Low preset exceeds 90 FPS, making 1440p the sweet spot for this hardware.

Q: Does the CPU bottleneck the GPU in Palworld?

A: At 1080p Low, the frame rate of 271 FPS is high enough that the CPU’s single-thread performance (3DMark single-thread score of 951) could be a limiting factor in demanding scenes. At 4K, the GPU is clearly the bottleneck, as frame rates drop significantly.

Q: How does the RTX 5070 compare to the RTX 3090 in benchmarks?

A: The RTX 5070 has an average benchmark score that is 0.6% higher than the RTX 3090, indicating near-parity in raw performance, though the 5070 has less VRAM (12 GB vs. 30 GB).

Q: What is the CPU’s multithreaded performance like?

A: The Ryzen 5 8400F scores 20851 in Cinebench R23 multicore and 24530 in Passmark multithread, which places it in the 82nd percentile. It trades blows with the Ryzen 7 2700X, which has a 0% delta in average score.

How This Combo Ranks

In the database of tested combos for Palworld, this pairing of the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 5070 ranks 373rd out of 1718 combinations. This places it in the top 22% of all tested configurations, which is a strong showing given the CPU’s mid-range positioning. The rank is likely driven by the GPU’s high percentile (83rd) and the CPU’s respectable 82nd percentile, meaning neither component drags the system down significantly.

The rank of 373 suggests that many other combos with higher-end CPUs or GPUs will outperform this setup, particularly at 4K where the GPU’s 12 GB memory is a constraint. However, the combo’s performance at 1440p, where it averages 108.2 FPS at High, puts it in a comfortable position for competitive and immersive gameplay. The data indicates that this is a balanced pairing for 1080p and 1440p gaming, with the CPU providing sufficient single-thread performance to avoid major bottlenecks and the GPU offering high rasterization throughput. The rank out of 1718 combos confirms that users can expect a smooth experience in Palworld at most settings, with the exception of 4K Ultra, which remains a challenge for this specific configuration.