Palworld
This combination offers playable performance with an average of 36 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 23 | 28 |
| 1440p QHD | 21 | 29 | 37 | 50 |
| 1080p Full HD | 35 | 45 | 58 | 72 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 7 5700X + AMD Radeon RX 570, In-Depth Analysis
The AMD Ryzen 7 5700X pairs an 8-core, 16-thread Zen 3 design with a base clock of 3.40 GHz and a boost clock of 4.60 GHz. For a game like Palworld, this configuration provides substantial headroom for the simulation and world-tracking tasks that survival titles typically demand. The CPU’s benchmark profile reinforces this: its Cinebench R23 multi-core score of 22620 and single-core score of 3193 place it in the 83rd percentile among all processors, indicating a balanced capability for both heavily threaded background workloads and the primary game thread. In the measured data, the processor’s influence is most apparent at lower resolutions and settings, where frame rates scale with the CPU’s ability to feed the GPU. The 3DMark results further illustrate this, with a 16-thread score of 6858 and a 2-thread score of 1821; the latter shows that even with only two active threads, the chip retains strong per-core performance, which is crucial for Palworld’s main logic loop when the GPU is not the bottleneck.
The CPU’s 32 MB of shared L3 cache is another factor relevant to Palworld’s performance. Games that stream many assets or maintain large object lists benefit from larger caches, and this configuration is well-suited to that. However, the data shows that the Ryzen 7 5700X is not the limiting component in most tested scenarios. When comparing to its nearest rivals, the processor’s average benchmark score of 26214 is within 0.2% of the AMD Ryzen 5 7600X and Intel Core i9-11900KF, demonstrating that its compute headroom is competitive with newer or higher-clocked parts. Yet, the measured FPS in Palworld at 1080p Low is 72 FPS, which is 58.7% higher than the 1080p High result of 45.4 FPS, suggesting that the game’s engine is scaling with graphics load rather than being pinned by CPU throughput. At 4K Ultra, the CPU’s role diminishes further, as the average FPS drops to 12.9, a scenario where the GPU is almost certainly the primary constraint. Thus, the Ryzen 7 5700X provides a solid foundation, but its performance headroom is largely untapped in this pairing, as the GPU consistently becomes the bottleneck as resolution and settings increase.
Settings Recommendations
The measured FPS rows for Palworld with this hardware combination reveal a clear hierarchy of playable settings. At 1080p, the Low preset delivers an average of 72 FPS, which is the only configuration in the entire dataset that approaches high-refresh-rate territory. This is 24.8% faster than the Medium preset’s 57.7 FPS and 58.6% faster than the High preset’s 45.4 FPS. The Ultra preset at 1080p drops to 35 FPS, which is a 51.4% reduction from Low. For users prioritizing smoothness, the 1080p Low preset is the only option that consistently stays above 60 FPS, making it the recommended choice for responsive gameplay. The Medium preset at 57.7 FPS is a borderline option, but it sacrifices some fluidity for visual fidelity; given the genre’s reliance on fast reactions to environmental threats, the data suggests that the FPS gain from Low is more valuable than the graphical upgrade.
At 1440p, the situation becomes more constrained. The Low preset yields an average of 49.7 FPS, which is the only 1440p setting that breaks 40 FPS. High and Medium produce 28.6 FPS and 36.9 FPS respectively, while Ultra falls to 20.6 FPS. None of these 1440p options achieve a locked 60 FPS, so the best experience is arguably the Low preset, which offers a 34.5% improvement over Medium. For 4K, all presets are below 30 FPS, with Low at 27.9 FPS being the highest; this is playable only for very casual sessions, and the 12.9 FPS at Ultra is effectively a slideshow. The data indicates that the optimal experience for this combination is 1080p Low, as it is the only preset that allows the hardware to maintain a frame rate above 60 FPS, providing the smoothest interaction with Palworld’s world. Any increase in settings beyond Low at 1080p, or any increase in resolution, results in a disproportionate FPS penalty that degrades the playability of this survival title.
Resolution Scaling
The FPS scaling from 1080p to 4K demonstrates a classic GPU-limited scenario, with the CPU’s performance remaining relatively constant across resolutions. Starting at 1080p Low, the average FPS is 72. Moving to 1440p Low, the average drops to 49.7, a 31.0% reduction. At 4K Low, the average is 27.9, which is a 61.3% reduction from the 1080p result. This steep decline with increasing pixel count is the signature of a graphics card that is saturated by the rendering workload, rather than a CPU that is running out of processing power. The same pattern holds for the High preset: 1080p yields 45.4 FPS, 1440p drops to 28.6 FPS, and 4K falls to 16.8 FPS. The scaling factor between 1080p and 4K is roughly 2.7x for Low and 2.7x for High, which aligns with the 4x pixel count increase but is not perfectly linear, indicating that other bottlenecks such as memory bandwidth or fill rate are also at play.
The limiting component is clearly the GPU, as the CPU’s benchmark scores show it is capable of far more than the measured FPS suggests. For instance, the Ryzen 7 5700X’s Passmark multi-thread score of 26612 places it well above average, yet at 4K Ultra the FPS is only 12.9. This is not a CPU constraint; rather, the AMD Radeon RX 570’s 4 GB of GDDR5 memory and 224.0 GB/s bandwidth are insufficient for the high-resolution texture and shading demands. The GPU’s 32 ROPs and 128 TMUs also limit pixel and texture throughput, respectively. The data shows that the gap between Low and Ultra settings widens as resolution increases: at 1080p, Ultra is 51.4% slower than Low, but at 4K, Ultra is 53.8% slower than Low. This indicates that the GPU’s compute resources are being exhausted by the higher settings, and the CPU has no role in mitigating this drop. Users should treat resolution scaling as a direct trade-off: every step up in resolution costs roughly 30-40% of the frame rate, and the CPU will not compensate for the GPU’s inability to keep pace.
FAQ
Q: What is the best resolution and settings combination for a consistent 60 FPS experience?
A: The only measured configuration that achieves an average above 60 FPS is 1920x1080 with the Low preset, which yields 72 FPS. All other settings at 1080p fall below 60 FPS, with Medium at 57.7 FPS being the closest but still insufficient. At 1440p or 4K, no preset reaches 60 FPS.
Q: How does the CPU’s benchmark performance compare to its nearest rivals?
A: The Ryzen 7 5700X has an average benchmark score of 26214, which is 0.1% higher than the Intel Core i9-11900KF and 0.2% lower than the AMD Ryzen 5 7600X. This indicates that the processor is performance-equivalent to these parts in synthetic workloads, despite being from an older generation.
Q: Is the GPU or CPU the primary bottleneck in Palworld?
A: The data shows the GPU is the limiting component. The CPU’s Cinebench R23 multi-core score of 22620 is strong, but the measured FPS drops significantly with resolution increases, such as from 72 FPS at 1080p Low to 27.9 FPS at 4K Low. This scaling pattern is characteristic of a GPU-bound scenario.
Q: What is the performance difference between the Low and Ultra presets at 1080p?
A: At 1920x1080, the Low preset averages 72 FPS, while the Ultra preset averages 35 FPS. This represents a 51.4% reduction in frame rate when moving from the lowest to the highest settings, indicating that the visual upgrades come at a steep performance cost.
Q: Does the RX 570’s memory configuration affect 4K performance?
A: Yes, the 4 GB of GDDR5 memory with a 256-bit bus and 224.0 GB/s bandwidth is a critical constraint. At 3840x2160, even the Low preset only averages 27.9 FPS, and the Ultra preset drops to 12.9 FPS. The limited memory capacity and bandwidth are insufficient for 4K rendering demands.
Q: How does the CPU’s single-thread performance relate to Palworld’s results?
A: The CPU’s 3DMark single-thread score is 921, and its Cinebench R23 single-core score is 3193. These scores are competitive, but the measured FPS at 1080p High (45.4) is not limited by this performance, as the GPU is the bottleneck. The CPU’s single-thread capability is sufficient for the game’s primary logic, but it does not translate into higher FPS once the GPU is saturated.
GPU Role
The AMD Radeon RX 570 is the decisive factor in this pairing’s Palworld performance, and its specifications explain the measured frame rates. The GPU is built on the Polaris 20 chip with a 14 nm process from GlobalFoundries, featuring 2048 shading units, 128 TMUs, and 32 ROPs. Its base clock is 1168 MHz with a boost clock of 1244 MHz, and it is paired with 4 GB of GDDR5 memory on a 256-bit bus, providing 224.0 GB/s of bandwidth. These figures are modest by modern standards, and the benchmark results confirm this: the GPU’s average benchmark score is 30158, which places it in the 74th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 5060, has a score of 30109, a delta of 0.2%, showing that the RX 570 is positioned at a performance tier that is far below the high-end, yet the data shows it is still capable of running Palworld at playable rates only at the lowest settings.
The GPU’s role is most evident in the resolution scaling. At 1080p Low, the GPU can push 72 FPS, but this drops to 45.4 FPS at High and 35 FPS at Ultra. The 5.095 TFLOPS of FP32 compute is the theoretical peak, but in practice, the 32 ROPs limit pixel fill rate to 39.81 GPixel/s, which becomes a bottleneck at higher resolutions. The memory bandwidth of 224.0 GB/s is also a constraint, particularly at 4K where the Low preset only achieves 27.9 FPS. The GPU’s DirectX 12 (12_0) and Vulkan 1.3 API support are adequate for Palworld, but the hardware lacks the modern features like ray tracing or mesh shaders that newer GPUs possess. The data indicates that the RX 570 is the component that determines the ceiling for this system: its 74th percentile standing means it is not a weak card, but it is not sufficient for high-fidelity gaming at demanding resolutions. The measured FPS across all settings and resolutions shows a clear pattern: the GPU is always the first component to be saturated, and any attempt to increase visual quality or resolution results in a proportional FPS loss, with no assistance from the CPU’s ample compute headroom.
Hardware Specifications
AMD Ryzen 7 5700X
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X + AMD Radeon RX 570 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 27.9 |
| 3840x2160 | Medium | 23.3 |
| 3840x2160 | High | 16.8 |
| 3840x2160 | Ultra | 12.9 |
| 2560x1440 | Low | 49.7 |
| 2560x1440 | Medium | 36.9 |
| 2560x1440 | High | 28.6 |
| 2560x1440 | Ultra | 20.6 |
| 1920x1080 | Low | 72.0 |
| 1920x1080 | Medium | 57.7 |
| 1920x1080 | High | 45.4 |
| 1920x1080 | Ultra | 35.0 |
Palworld with Ryzen 7 5700X + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 570 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X + RX 570
Explore FPS benchmarks for other games using this same hardware combination.