Palworld

Palworld on the AMD Ryzen 5 7400F and AMD Radeon RX 570 combination is a study in GPU-bound limitations. The benchmark data shows that this pairing, ranked 2821 out of 2944 tested combos for this game, struggles to maintain playable frame rates at higher resolutions. The RX 570, despite its 74th percentile standing among all GPUs, is the clear bottleneck in this pairing, as the CPU's strong multi-threaded performance (83rd percentile) cannot compensate for the graphics card's limitations in this title. The data indicates that this system is only viable at 1080p with adjusted settings, and even then, it requires compromises to achieve smooth gameplay.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals a textbook case of GPU saturation. At 1080p with High settings, the system produces 46 FPS, but this drops to 30 FPS at 1440p and a mere 17 FPS at 4K. This represents a 63% performance loss when moving from 1080p to 4K, which is a steep decline that points directly to the graphics card being overwhelmed by the increasing pixel count. The RX 570's 4 GB of GDDR5 memory and 224.0 GB/s bandwidth are simply not sufficient for the demands of 4K rendering in Palworld's open-world environment.

The pattern holds across all settings presets. At Low settings, the system achieves 73 FPS at 1080p, 48 FPS at 1440p, and 27 FPS at 4K. The delta between 1080p and 1440p is 25 FPS, while the delta between 1440p and 4K is 21 FPS. This relatively consistent drop-off indicates that the GPU is the limiting component at every resolution, as the CPU has ample headroom to feed frames. The Ryzen 5 7400F's 6 cores and 12 threads, with a boost clock of 4.70 GHz, are never the constraint here; the data shows that the RX 570's pixel rate of 39.81 GPixel/s is the ceiling for performance.

Interestingly, the scaling efficiency is better at lower settings. From 1080p Low (73 FPS) to 1440p Low (48 FPS), the drop is 34%, while from 1440p Low to 4K Low (27 FPS), the drop is 44%. This suggests that at lower settings, the GPU is less burdened by shading work and more limited by raw fill rate and memory bandwidth, which scale poorly with resolution. At High and Ultra settings, the additional shading units (2048) and TMUs (128) are pushed harder, but the 32 ROPs become the limiting factor for pixel throughput, causing the steeper declines seen at 4K High (17 FPS) and 4K Ultra (13 FPS).

FAQ

Q: Can this system run Palworld at 4K?

A: No, not at playable frame rates. The data shows 17 FPS at High settings and 13 FPS at Ultra settings for 3840x2160 resolution. Even at Low settings, 4K only achieves 27 FPS, which is below the threshold for smooth gameplay in this action-oriented survival title.

Q: What is the best resolution for this combo?

A: 1920x1080 is the only resolution where the system achieves consistently playable frame rates across multiple settings. At 1080p, the average FPS ranges from 35 (Ultra) to 73 (Low), with Medium and High hitting 59 and 46 FPS respectively.

Q: How does the RX 570 compare to its nearest rivals in this context?

A: The RX 570's average benchmark score of 28766 is nearly identical to the AMD Radeon RX 6800M (28874, -0.4% delta) and the AMD Radeon RX 470 (28996, -0.8% delta). It slightly outperforms the AMD Radeon R9 M295X (28580, +0.7%) and NVIDIA Quadro RTX 8000 (28421, +1.2%). This indicates that in pure benchmark terms, the RX 570 is a mid-pack performer among its peers, but its 4 GB memory capacity is a significant drawback in modern games.

Q: Is the Ryzen 5 7400F holding back the RX 570?

A: No, the CPU is not the bottleneck. The Ryzen 5 7400F benchmarks show it is 0.1% faster than the Intel Core i5-14600T (32707 vs 32750 avg score) and 0.2% faster than the Intel Core Ultra 7 155H (32697). Its single-thread score of 3072 in Cinebench R23 and multi-thread score of 21765 indicate strong performance that far exceeds what the RX 570 can utilize in Palworld.

Q: What settings preset should be avoided?

A: Ultra settings should be avoided entirely. At 1080p Ultra, the system only manages 35 FPS, and this drops to 23 FPS at 1440p and 13 FPS at 4K. These frame rates are not suitable for a game that requires responsive controls for survival mechanics and creature catching.

Q: Does the 4 GB VRAM cause issues?

A: The 4 GB GDDR5 memory is a limiting factor, particularly at higher resolutions and settings. The data shows a disproportionate performance drop when moving from Medium to High settings, which suggests that memory capacity becomes a constraint as texture detail increases. At 1440p High, the system achieves 30 FPS, but at 4K High, it drops to 17 FPS, indicating that the memory bandwidth (224.0 GB/s) cannot sustain the data throughput required.

GPU Role

The AMD Radeon RX 570, built on the Polaris 20 chip with GCN 4.0 architecture, is the primary determinant of Palworld's performance in this pairing. Its 4 GB of GDDR5 memory on a 256-bit bus provides 224.0 GB/s of bandwidth, which is adequate for 1080p gaming but becomes strained at higher resolutions. The GPU's base clock of 1168 MHz and boost clock of 1244 MHz are modest by modern standards, and the data shows that these clocks translate into a maximum of 73 FPS at 1080p Low settings.

The GPU's benchmark scores place it at the 74th percentile among all GPUs, with an average score of 28766. Its nearest rival, the AMD Radeon RX 6800M, scores 28874, a mere 0.4% difference, which is surprising given the RX 6800M's mobile positioning. This proximity in scores suggests that the RX 570's desktop power delivery (150 W TDP) and dedicated cooling allow it to perform competitively against more modern parts in synthetic benchmarks. However, in real-world gaming like Palworld, the 4 GB memory capacity and 32 ROPs limit its ability to handle high-resolution textures and complex geometry.

The 5.095 TFLOPS FP32 performance is the theoretical ceiling, but the data shows that the system rarely approaches this limit. At 1080p Medium, the system achieves 59 FPS with a minimum of 50 FPS, which indicates that the GPU is being utilized efficiently. However, at 4K Ultra, the 13 FPS average suggests that the GPU is overwhelmed by the pixel shader workload, and the 39.81 GPixel/s pixel rate becomes the hard bottleneck. The 159.2 GTexel/s texture rate is sufficient for 1080p, but the 32 ROPs are insufficient for 4K rendering.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance across all settings. Low settings produce an average of 73 FPS, which is smooth and responsive. Medium settings drop to 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS, providing a good balance of visual quality and performance. High settings yield 46 FPS, which is playable but with noticeable dips. Ultra settings bring the average down to 35 FPS, which is borderline for a game that requires precision in combat and exploration.

Moving to 2560x1440, the performance degrades significantly. Low settings still manage 48 FPS, but Medium drops to 39 FPS with a minimum of 33 FPS and a maximum of 45 FPS. High settings fall to 30 FPS, which is below the threshold for smooth gameplay. Ultra settings are essentially unplayable at 23 FPS.

At 3840x2160, the system is not viable for Palworld. Low settings produce 27 FPS, Medium averages 22 FPS with a minimum of 18 FPS and a maximum of 25 FPS, High settings drop to 17 FPS, and Ultra settings bottom out at 13 FPS. These frame rates are too low for a game that requires active engagement with its world and creatures.

The data shows a clear pattern: each resolution step reduces performance by roughly one-third to one-half, regardless of settings. This consistency reinforces the conclusion that the RX 570 is the sole limiting factor, as a CPU bottleneck would show diminishing returns at lower resolutions.

Settings Recommendations

For this specific hardware combination, the optimal experience is achieved at 1920x1080 with Medium settings. The data shows 59 FPS average with a minimum of 50 FPS and a maximum of 68 FPS, which provides a stable and responsive gaming experience. This preset balances visual fidelity with performance, ensuring that the game remains playable during intense moments such as base building or Pals battles.

If higher visual quality is desired, High settings at 1080p (46 FPS) is a viable alternative, but the data suggests that the frame rate dips may be noticeable. The jump from Medium to High costs 13 FPS, which is a 22% reduction, and this is likely due to the 4 GB VRAM being taxed by higher-resolution textures. For players who prioritize smoothness over visuals, Low settings at 1080p (73 FPS) is the best choice, offering a significant frame rate cushion.

At 1440p, the only recommended preset is Low (48 FPS), as Medium (39 FPS) and High (30 FPS) are below the 40 FPS threshold for comfortable play. Ultra settings at 1440p (23 FPS) and any settings at 4K (13-27 FPS) should be avoided entirely. The data indicates that this system is best suited for 1080p gaming with conservative settings, and users should not expect to run Palworld at higher resolutions without substantial performance compromises.

CPU Role

The AMD Ryzen 5 7400F plays a supporting role in this pairing, and the data shows that it is more than capable of keeping up with the RX 570's output. With 6 cores and 12 threads based on the Zen 4 (Raphael) architecture, the CPU operates at a base clock of 3.70 GHz and boosts to 4.70 GHz. Its Cinebench R23 scores of 21765 (multi-core) and 3072 (single-core) place it in the 83rd percentile of all CPUs, indicating strong performance for its class.

The CPU's cache configuration includes 64 KB L1 per core, 1 MB L2 per core, and 32 MB shared L3, which provides ample bandwidth for game logic and physics calculations. The PassMark multi-thread score of 25645 and single-thread score of 3689 further confirm that the CPU is not a bottleneck in Palworld's single-threaded or multi-threaded workloads. The data shows that even at 1080p Low settings, where the GPU is producing 73 FPS, the CPU has no trouble feeding frames.

Compared to its nearest rivals, the Ryzen 5 7400F is competitive. It edges out the Intel Core i5-14600T (32707 vs 32750, +0.1%) and the Intel Core Ultra 7 155H (32697, +0.2%), while trailing the AMD Ryzen 7 PRO 6850H (32812, -0.2%) by a negligible margin. This parity in benchmark scores suggests that any of these CPUs would perform identically in Palworld when paired with an RX 570, as the GPU is the limiting factor. The Ryzen 5 7400F's 65 W TDP and DDR5 memory support (83.2 GB/s bandwidth) are additional advantages, but they do not translate into higher frame rates in this game due to the GPU constraint.