Archeage
This combination offers playable performance with an average of 31 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 10 | 14 | 21 | 24 |
| 1440p QHD | 17 | 25 | 37 | 42 |
| 1080p Full HD | 26 | 37 | 55 | 62 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 7400F + AMD Radeon RX 570, In-Depth Analysis
The AMD Ryzen 5 7400F and AMD Radeon RX 570 pairing in Archeage presents a study in contrast: a modern 6-core Zen 4 processor paired with a legacy Polaris GPU. The measured frame rates across resolutions and settings reveal a system where the graphics card is the primary bottleneck, yet the CPU’s strength ensures that even the lowest settings deliver a playable experience. This analysis examines the data to understand how this combination behaves in the 2014 MMORPG.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data shows a steep and consistent penalty as resolution increases, which strongly indicates a GPU-bound scenario. At 1080p High settings, the combo delivers 37 FPS. Moving to 1440p High drops that to 25 FPS, a 32% reduction. Pushing further to 4K High yields just 14 FPS, which is a 62% decline from the 1080p baseline. This pattern of diminishing returns at higher resolutions is the classic signature of a graphics card struggling to fill pixels, not a processor limitation.
The scaling across the other presets reinforces this conclusion. At Medium settings, the frame rates go from 55 FPS at 1080p, to 37 FPS at 1440p, and finally to 21 FPS at 4K. The drop from 1080p to 1440p is 33%, and from 1080p to 4K is 62%. The RX 570’s 4 GB of GDDR5 memory and 224.0 GB/s bandwidth are likely being saturated at higher resolutions, causing the exponential performance collapse. The GPU’s raw compute, 5.095 TFLOPS FP32, is insufficient for the pixel throughput demanded by 4K in this title.
However, the data also suggests that the CPU is not entirely idle. The fact that the 1080p Low preset achieves 62 FPS, which is above the 60 FPS threshold for smooth gameplay, shows that the Ryzen 5 7400F is capable of feeding the GPU with enough frames when the graphical load is light. If the CPU were the limiting factor, we would expect to see a much smaller difference between the Low presets at different resolutions. Instead, the gap between 1080p Low (62 FPS) and 4K Low (24 FPS) is a massive 61%, confirming that the GPU is the sole bottleneck. The CPU’s high single-thread performance, evidenced by its Cinebench R23 single-core score of 3072, ensures that it is not holding back the RX 570, even in a demanding MMORPG environment.
How This Combo Ranks — use comboRankInGame vs other tested combos
The data places this specific combination at rank 3544 out of 3708 tested combos in Archeage. This puts it in the bottom 5% of all configurations, which is a stark indicator of its overall performance level in this game. The percentile ranking is a direct consequence of the GPU’s age and limited capabilities, despite the CPU’s modern architecture.
The CPU itself, however, sits in a much stronger position. The Ryzen 5 7400F has a percentile ranking of 83 against all CPUs, meaning it outperforms 83% of processors in general benchmark tests. Its average benchmark score of 32750 is essentially tied with its nearest rivals. For instance, it is 0.1% ahead of the Intel Core i5-14600T and 0.2% ahead of the Intel Core Ultra 7 155H. It also lags only 0.2% behind the AMD Ryzen 7 PRO 6850H. This shows that the CPU is a high-performing component that is not the source of this combo’s low rank.
Similarly, the GPU has a percentile rank of 74 against all GPUs, which is respectable for an older card. Its average benchmark score of 28766 is close to its rivals, such as the AMD Radeon RX 6800M (0.4% ahead) and the AMD Radeon RX 470 (0.8% ahead). This indicates that the RX 570 is performing as expected for its class. The low combo rank is therefore a product of the GPU’s absolute performance level being insufficient for the demands of Archeage at higher settings, not a malfunction or a mismatched pairing. The data implies that while the CPU has headroom, the GPU is a hard ceiling for this system’s performance in this specific MMORPG.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the optimal experience for this combo is a careful balance between visual quality and playability. At 1080p, the Medium preset is the clear sweet spot. It achieves an average of 55 FPS, with a minimum of 47 FPS and a maximum of 63 FPS. This provides a smooth, consistent frame rate that avoids the dips into the 30s that would be noticeable during intense gameplay. The 37 FPS average at High is playable but risks stuttering in crowded areas, while the 26 FPS at Ultra is not a satisfactory experience.
At 1440p, the data suggests that the Low preset is the only viable option for a smooth experience. The 42 FPS average at Low is acceptable, but the Medium preset’s 37 FPS average, with a minimum of 32 FPS, indicates that frame pacing may become an issue. The High preset at 25 FPS and Ultra at 17 FPS are too low for a responsive MMORPG experience. Therefore, for 1440p, the recommendation is to use Low settings to maintain a playable frame rate. The step up to Medium does not provide enough of a visual benefit to justify a 12% performance loss.
For 4K, the data shows that this combination is not suited for the resolution. The highest average FPS recorded at 4K is 24 FPS on the Low preset, which falls below the threshold for smooth gameplay. The Medium preset drops to 21 FPS, and High and Ultra are at 14 FPS and 10 FPS, respectively. The conclusion is clear: 4K is not a viable resolution for this GPU in Archeage. Users should stick to 1080p Medium for the best balance of visual fidelity and performance, or 1080p Low if they prioritize a higher frame rate buffer.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the best resolution and setting combo for this system in Archeage?
A: According to the measured data, 1920x1080 with Medium settings provides the best experience, yielding an average of 55 FPS with a minimum of 47 FPS. This is the only preset that combines a high average with a minimum frame rate above 45 FPS.
Q: How much of a performance drop is there when moving from 1080p to 4K on the Low preset?
A: The data shows a dramatic decline. At 1920x1080 Low, the average FPS is 62. At 3840x2160 Low, the average FPS drops to 24. This represents a 61% reduction in performance, highlighting the GPU’s inability to handle the increased pixel count.
Q: Is the AMD Ryzen 5 7400F the limiting factor in this build?
A: No. The CPU’s benchmark data shows it is a high performer, with an 83rd percentile ranking and a Cinebench R23 multi-core score of 21765. The FPS scaling across resolutions indicates the GPU is the bottleneck, as performance drops significantly with increased resolution even on the same settings preset.
Q: Can this combination run Archeage at 1440p with Medium settings?
A: It can run it, but the experience may not be ideal. The measured average FPS is 37, with a minimum of 32 FPS. While this is technically playable, it is close to the 30 FPS threshold where frame pacing issues can become noticeable in a fast-paced MMORPG.
Q: How does the GPU’s memory capacity affect performance at high resolutions?
A: The AMD Radeon RX 570 has 4 GB of GDDR5 memory. The data shows that at 4K, even the Medium preset only yields 21 FPS, suggesting that the 4 GB frame buffer is a significant constraint at that resolution, forcing the card to rely on slower memory operations.
Q: How does this combo rank among all tested systems for this game?
A: The combo ranks 3544 out of 3708 tested combinations. This places it in the bottom 5% of all configurations, which is consistent with the GPU’s age and performance limitations in a modern gaming context.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 570 is the primary determinant of this combo’s performance in Archeage. Its specifications, while once considered mid-range, are now dated. The GPU operates with a base clock of 1168 MHz and a boost clock of 1244 MHz, which, combined with its 2048 shading units, provides a modest 5.095 TFLOPS of FP32 compute power. This raw compute is insufficient for the demands of higher resolutions, as evidenced by the FPS data.
The 4 GB of GDDR5 memory, running at 1750 MHz (7 Gbps effective) on a 256-bit bus, provides a bandwidth of 224.0 GB/s. This memory configuration is likely the critical weakness. At 1080p, the card has enough memory bandwidth to manage, but at 1440p and especially 4K, the limited capacity and bandwidth become a severe bottleneck. The transition from 1080p Medium (55 FPS) to 1440p Medium (37 FPS) shows a 33% performance loss, which is typical as the frame buffer is stressed. The collapse to 21 FPS at 4K Medium suggests that the GPU is thrashing, unable to keep the necessary textures in its 4 GB frame buffer.
The GPU’s 74th percentile ranking and its benchmark scores, such as 880 in 3DMark Steel Nomad, confirm that it is performing as expected for its class. However, its nearest rivals, like the AMD Radeon RX 470 which is 0.8% slower, are all similarly aged. The data shows that the RX 570 is a capable 1080p card for this game, but its architecture, built on the 14 nm process, is fundamentally outmatched by the pixel-pushing requirements of 1440p and 4K. The pixel rate of 39.81 GPixel/s and texture rate of 159.2 GTexel/s are simply not high enough for modern resolutions in a demanding MMORPG environment.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 7400F plays a supporting role in this combination, and the data suggests it has significant headroom. As a 6-core, 12-thread processor based on the Zen 4 architecture, it is a modern and powerful component. Its base clock of 3.70 GHz and boost clock of 4.70 GHz, coupled with a 32 MB L3 cache, provide ample computational power for game logic and world simulation.
The CPU’s benchmark scores are robust. A Cinebench R23 multi-core score of 21765 and a single-core score of 3072 indicate that it can handle both multi-threaded workloads and the single-thread-heavy tasks typical of MMORPGs. The 83rd percentile ranking against all CPUs confirms this is a top-tier processor. In Archeage, which is often CPU-intensive due to many players and entities, this CPU ensures that the game logic does not become a bottleneck.
The FPS data confirms this analysis. At 1080p Low, the combo achieves 62 FPS, which is likely near the maximum the GPU can output. If the CPU were weak, we would expect to see a frame rate cap or severe dips in crowded areas. The fact that the frame rate scales so heavily with resolution (from 62 FPS at 1080p Low to 24 FPS at 4K Low) proves that the CPU is not the limiting factor; it is feeding the GPU as fast as the GPU can process frames. The Passmark single-thread score of 3689 further supports this, showing the CPU has the single-core strength needed for this game’s engine. In essence, the Ryzen 5 7400F is an ideal partner for a mid-range GPU, ensuring that the GPU is the only performance ceiling.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a full picture of performance across all tested configurations.
1920x1080:
- Low: Average 62 FPS. This is the highest frame rate achieved, indicating a GPU-limited scenario at this resolution.
- Medium: Average 55 FPS, with a minimum of 47 FPS and a maximum of 63 FPS. This is the most balanced preset.
- High: Average 37 FPS. This is a significant drop from Medium, showing the cost of higher graphical fidelity.
- Ultra: Average 26 FPS. This preset is not playable for a smooth experience.
2560x1440:
- Low: Average 42 FPS. This is the only playable preset at this resolution.
- Medium: Average 37 FPS, with a minimum of 32 FPS and a maximum of 43 FPS. The minimum FPS is borderline for smooth gameplay.
- High: Average 25 FPS. This is too low for a responsive experience.
- Ultra: Average 17 FPS. This is effectively a slideshow.
3840x2160:
- Low: Average 24 FPS. This is below the acceptable threshold for playability.
- Medium: Average 21 FPS, with a minimum of 18 FPS and a maximum of 24 FPS. The frame times are likely inconsistent.
- High: Average 14 FPS. This is not a viable configuration.
- Ultra: Average 10 FPS. The 4K resolution is clearly not supported by this GPU.
The data shows a consistent trend: the GPU is the sole bottleneck, and its performance degrades predictably as resolution increases. The 1080p Medium preset is the only configuration that delivers an average FPS above 50 with a minimum above 45, making it the recommended setting for this system.
Hardware Specifications
AMD Ryzen 5 7400F
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + AMD Radeon RX 570 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 24.0 |
| 3840x2160 | Medium | 21.0 |
| 3840x2160 | High | 14.0 |
| 3840x2160 | Ultra | 10.0 |
| 2560x1440 | Low | 42.0 |
| 2560x1440 | Medium | 37.0 |
| 2560x1440 | High | 25.0 |
| 2560x1440 | Ultra | 17.0 |
| 1920x1080 | Low | 62.0 |
| 1920x1080 | Medium | 55.0 |
| 1920x1080 | High | 37.0 |
| 1920x1080 | Ultra | 26.0 |
Archeage with Ryzen 5 7400F + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 570 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RX 570
Explore FPS benchmarks for other games using this same hardware combination.