Barony

The AMD Ryzen 5 7400F and AMD Radeon RX 570 pairing in Barony occupies a very specific performance tier. The data shows this combination is a playable entry-level setup for the roguelike, but it requires careful attention to resolution and settings to maintain smooth frame rates. The Ryzen 5 7400F is a modern 6-core, 12-thread processor based on the Zen 4 architecture, built on a 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 4.70 GHz, drawing a 65 W TDP. This CPU is a strong performer in general compute tasks, with its Cinebench R23 multicore score of 21765 and single-core score of 3072 placing it in the 83rd percentile of all CPUs.

In contrast, the RX 570 is an older graphics card from 2017, built on the 14 nm Polaris 20 chip with GCN 4.0 architecture. It features 4 GB of GDDR5 memory on a 256-bit bus, yielding a bandwidth of 224.0 GB/s. The GPU’s base clock is 1168 MHz with a boost clock of 1244 MHz. Its age is reflected in its performance metrics, such as a 3DMark Steel Nomad DX12 score of 880 and a Geekbench Vulkan score of 42752, placing it in the 74th percentile of all GPUs. The relationship between these two components is clear: the CPU is more than capable of handling the game’s logic, while the GPU becomes the primary bottleneck at higher resolutions and settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 7400F provides a robust foundation for Barony. With 6 cores and 12 threads, it offers ample parallel processing power for the game’s procedural generation and AI calculations. The high boost clock of 4.70 GHz ensures that single-threaded tasks, which often dominate in roguelike games, are handled with minimal latency. The CPU’s 32 MB of shared L3 cache is another asset, allowing for faster access to frequently used game data. In the broader context of the CPU market, the 7400F sits in a competitive middle ground. Its average benchmark score of 32750 is nearly identical to the Intel Core i5-14600T, which scores 32707 with a deltaPct of 0.1%. It is also within a fraction of a percent of the AMD Ryzen 7 PRO 6850H and the AMD Ryzen AI 7 PRO 360.

The impact of the CPU on the measured FPS is indirect but significant. At 1920x1080 with Low settings, the combination achieves an average of 138 FPS, a figure that suggests the CPU is not a limiting factor at this resolution. The high single-core performance ensures that the game’s main thread is rarely stalled, allowing the GPU to operate near its maximum potential. However, the data also shows a clear pattern: as resolution increases, the frame rate drops, indicating that the GPU is the primary constraint. For instance, at 4K Ultra, the average FPS falls to 21, a dramatic reduction that cannot be attributed to CPU performance alone. The 7400F’s capability is further evidenced by its Cinebench R20 scores, with a multicore score of 9141 and a single-core score of 1290, reinforcing its strength in both multi-threaded and lightly-threaded workloads.

The CPU’s memory support for DDR5 is another factor that benefits the system. With a dual-channel memory bus and a bandwidth of 83.2 GB/s, the CPU can feed data to the GPU efficiently, avoiding potential bottlenecks in data transfer. This is crucial in Barony, where the game world is constantly changing, and new data must be streamed to the graphics card. The CPU’s performance in Passmark’s data compression test, scoring 289999, and in data encryption, scoring 16712, further demonstrates its ability to handle the varied computational demands of a modern game. Overall, the data indicates that the Ryzen 5 7400F is not the weak link in this pairing; it provides a solid platform that allows the RX 570 to be the deciding factor in overall frame rates.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 570 is unequivocally the limiting factor in this combination. Its 4 GB of VRAM is a critical constraint, especially at higher resolutions. The GPU’s memory clock of 1750 MHz (7 Gbps effective) and 224.0 GB/s bandwidth are sufficient for 1080p gaming, but they struggle to keep up with the demands of 4K textures and geometry. The GPU has 2048 shading units, 128 TMUs, and 32 ROPs, which are modest numbers by modern standards. Its pixel rate of 39.81 GPixel/s and texture rate of 159.2 GTexel/s limit how quickly it can fill the screen, directly impacting the measured FPS.

The data shows a clear correlation between GPU workload and performance. At 1920x1080, the RX 570 can deliver playable frame rates, with an average of 138 FPS on Low and 88 FPS on High. The jump to 2560x1440 sees a significant drop, with the average FPS on High falling to 56. At 3840x2160, the GPU is overwhelmed, with the average FPS on High dropping to 29, and on Ultra to just 21. This performance pattern is typical of a GPU with limited VRAM and raw compute power. The RX 570’s closest rivals, based on average benchmark scores, include the AMD Radeon RX 6800M, which scores 28874 with a deltaPct of -0.4%, and the AMD Radeon RX 470, which scores 28996 with a deltaPct of -0.8%. This indicates that the RX 570 is performing at a level consistent with its position in the market, but that position is firmly in the entry-level segment.

The GPU’s 5.095 TFLOPS of FP32 performance is a theoretical ceiling that is rarely reached in real-world gaming. The lack of dedicated ray tracing cores (RT cores are null) means that any modern graphical features are handled in software, further reducing performance. The API support for DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3 shows that the GPU is compatible with contemporary games, but the hardware is simply too old to handle high graphical loads. The measured FPS data, such as the 103 FPS average at 1080p Medium, shows that the GPU is best utilized at lower settings and resolutions. Pushing the GPU to Ultra at any resolution results in a substantial performance penalty, making those settings impractical for a smooth experience.

FAQ

*Q: What is the best resolution to play Barony with this CPU and GPU combination?*

A: Based on the measured FPS data, 1920x1080 is the most effective resolution. The average frame rates at this resolution range from 63 FPS on Ultra to 138 FPS on Low, providing a smooth experience. At 2560x1440, the average FPS drops to between 40 and 87, which is still playable but less consistent. At 3840x2160, the average FPS falls below 46, which is not ideal for a fast-paced roguelike.

Q: How does the Ryzen 5 7400F compare to its nearest rivals in terms of performance?

A: The Ryzen 5 7400F has an average benchmark score of 32750. This is nearly identical to the Intel Core i5-14600T, which has a score of 32707 and a deltaPct of 0.1%. It is also within 0.2% of the Intel Core Ultra 7 155H (score 32697) and within 0.3% of the AMD Ryzen AI 7 PRO 360 (score 32662). The AMD Ryzen 7 PRO 6850H is slightly ahead, with a score of 32812 and a deltaPct of -0.2%, meaning the 7400F is 0.2% slower.

*Q: Is the RX 570’s 4 GB of VRAM sufficient for Barony?*

A: The data suggests that 4 GB of VRAM is a limiting factor at higher resolutions. At 1920x1080, the frame rates are acceptable, but at 2560x1440 and above, the performance degrades significantly. For instance, the average FPS at 4K Medium is 34, while at 1080p Medium it is 103. This indicates that the VRAM capacity is insufficient for the texture and geometry loads at higher resolutions, leading to stuttering and reduced frame rates.

Q: What is the performance difference between the Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset yields an average FPS of 138, while the Ultra preset yields an average of 63. This represents a significant drop in performance when moving to the highest settings. The Medium preset provides a balanced option with an average FPS of 103, offering a substantial improvement over Ultra while maintaining good visual quality.

*Q: How does this combo rank among all tested combinations in Barony?*

A: This CPU and GPU combination ranks 2813 out of 2935 tested combos in Barony. This places it in the lower percentile of all tested systems, indicating that it is not a high-performance setup. The ranking reflects the RX 570’s age and limited capabilities, despite the modern CPU.

Q: Does the CPU or GPU have a greater impact on the measured FPS?

A: The data strongly indicates that the GPU is the primary bottleneck. The CPU’s high performance, as shown by its Cinebench R23 score of 21765, allows it to handle the game logic without issue. However, the frame rates drop dramatically as resolution increases, which is a classic sign of GPU limitation. For example, the average FPS at 1080p High is 88, but at 4K High it drops to 29, a 67% reduction that is attributable to the GPU’s inability to render at higher resolutions.

How This Combo Ranks

The AMD Ryzen 5 7400F and AMD Radeon RX 570 combination holds a rank of 2813 out of 2935 tested combos in Barony. This ranking places it in the bottom 5% of all tested systems, which is a poor showing. The data reveals a significant mismatch between the CPU and GPU. The CPU is a modern, high-performance part, but the GPU is an older, entry-level component. This imbalance is reflected in the measured frame rates, which are consistently modest across all settings. The combo’s rank is a direct consequence of the GPU’s limitations, as the CPU is more than capable of supporting a much faster graphics card.

The ranking also highlights the importance of pairing components with similar performance levels. A system with a top-tier CPU and a weak GPU will always be held back by the GPU. In this case, the Ryzen 5 7400F’s potential is wasted because the RX 570 cannot translate the CPU’s processing power into high frame rates. The measured FPS data supports this conclusion: at 1080p Low, the combo achieves 138 FPS, but this is still a modest figure for a game like Barony, which is not graphically intensive. The combo’s rank of 2813 suggests that many other combinations, even those with older CPUs, outperform it due to having better GPUs. This is a classic example of a system where the GPU is the primary determinant of gaming performance.

The gap between this combo and higher-ranked ones is substantial. The data shows that the RX 570’s performance is comparable to the AMD Radeon RX 470, which is a slightly older card. This positions the GPU firmly in the entry-level segment. The CPU’s high percentile ranking of 83 does little to improve the overall combo rank, as the GPU’s percentile of 74 is the binding constraint. For users looking to play Barony smoothly, this combo is acceptable at 1080p, but its low rank indicates that it is not a recommended choice for higher resolutions or for users who prioritize graphical fidelity.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings presets. At 1920x1080, the combo performs best. The Low preset delivers an average FPS of 138, which is the highest recorded for this combo. The Medium preset follows with an average of 103 FPS, with a minimum of 87 and a maximum of 118. The High preset yields an average of 88 FPS, while the Ultra preset drops to an average of 63 FPS. These numbers indicate that 1080p is the sweet spot for this combo, with even the Ultra preset providing a playable frame rate.

Moving to 2560x1440, the performance degrades noticeably. The Low preset averages 87 FPS, which is still smooth, but the Medium preset drops to 65 FPS, with a minimum of 55 and a maximum of 74. The High preset averages 56 FPS, and the Ultra preset falls to 40 FPS. These figures suggest that 1440p is playable but requires a compromise on settings. The drop from 1080p to 1440p is significant, with the High preset losing 32 FPS on average. This is a direct result of the GPU’s limited pixel throughput and VRAM capacity.

At 3840x2160, the combo struggles to maintain playable frame rates. The Low preset averages 46 FPS, which is marginal. The Medium preset averages 34 FPS, with a minimum of 29 and a maximum of 39. The High preset averages 29 FPS, and the Ultra preset averages just 21 FPS. These numbers are too low for a smooth experience in a fast-paced roguelike. The data shows a clear pattern: the higher the resolution, the lower the frame rate, confirming the GPU’s role as the bottleneck. The difference between the Low and Ultra presets at 4K is 25 FPS, which is a substantial gap that highlights the GPU’s inability to handle high graphical loads at this resolution.

Settings Recommendations

Based on the measured FPS data, the recommended settings for this combo depend heavily on the target resolution. For players using a 1920x1080 monitor, the Medium preset offers the best balance of visual quality and performance. With an average FPS of 103 and a minimum of 87, it provides a smooth and stable experience. The High preset is also viable, with an average of 88 FPS, but the Medium preset offers a significant performance buffer, which is beneficial in a game with unpredictable procedural generation. The Ultra preset, with an average of 63 FPS, is playable but leaves little headroom for demanding scenes.

For players at 2560x1440, the Low preset is the safest choice, with an average FPS of 87. The Medium preset, averaging 65 FPS, is also acceptable, but the minimum FPS of 55 indicates potential stutters during intense moments. The High and Ultra presets, with averages of 56 and 40 FPS respectively, are not recommended for a consistently smooth experience. At 3840x2160, the data suggests that this combo is not suitable for gaming. Even the Low preset, with an average of 46 FPS, is on the edge of playability. The Medium, High, and Ultra presets all fall below 35 FPS, which is too low for a responsive game.

The best experience, according to the measured rows, is achieved at 1080p with Medium settings. This configuration provides an average FPS of 103, which is well above the 60 FPS threshold for smooth gameplay. The minimum FPS of 87 ensures that frame drops are rare. The Ultra preset at 1080p, with an average of 63 FPS, is a close second, but the Medium preset offers better consistency. In summary, players should prioritize 1080p resolution and choose the Medium preset to get the most out of this hardware combination. Pushing to higher resolutions or Ultra settings will result in a subpar experience.