Palworld

Palworld on the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4070 combination delivers a highly playable experience across most settings, but the data reveals a clear performance hierarchy. The system is capable of exceeding 200 FPS at 1080p on Medium settings, yet it drops below 60 FPS at 4K Ultra, indicating that the GPU becomes the primary bottleneck at higher resolutions. This analysis breaks down the measured frame rates, the role of the CPU and GPU, and provides practical settings recommendations based strictly on the provided data.

FAQ

Q: What is the best resolution to play Palworld with this CPU and GPU combo?

A: Based on the measured data, 2560x1440 (1440p) on High settings offers the best balance of visual quality and performance, yielding an average of 102 FPS. While 1080p delivers higher frame rates up to 248 FPS on Low, 1440p provides a significant visual upgrade while still maintaining a frame rate well above the 60 FPS threshold for smooth gameplay.

Q: Can this system handle 4K gaming in Palworld?

A: Yes, but with compromises. At 3840x2160 (4K), the system achieves 57 FPS on High settings and 43 FPS on Ultra. To get a more comfortable frame rate at 4K, the data shows that dropping to Medium settings increases the average to 73 FPS, while Low settings push it to 91 FPS.

Q: How does the Ryzen 5 5600F perform relative to its closest rivals?

A: The Ryzen 5 5600F's average benchmark score is 36945. Its closest rival, the Intel Core Ultra 5 225, scores 36938, putting the two in a dead heat with a deltaPct of 0. The AMD Ryzen 5 5500X3D is slightly ahead by 0.2%, while the Intel Core i9-12900T is marginally ahead by 0.5%. The CPU sits in the 85th percentile of all CPUs.

Q: Is the RTX 4070 a strong performer in this game?

A: The data indicates yes. The RTX 4070 has an average benchmark score of 37648 and sits in the 81st percentile of all GPUs. In Palworld, it drives frame rates from 117 FPS at 1080p Ultra to 43 FPS at 4K Ultra, showing it has substantial headroom for high-refresh-rate gaming at lower resolutions.

Q: What is the performance difference between the Low and Ultra presets at 1440p?

A: The difference is substantial. At 2560x1440, the Low preset averages 163 FPS, while the Ultra preset averages 77 FPS. This represents a significant performance drop of about 86 FPS for the highest visual fidelity, a trade-off that many players might find steep.

Q: Is the RTX 4070 significantly better than its nearest rivals?

A: The RTX 4070's average benchmark score is 37648. Its closest rival, the NVIDIA Tesla P4, scores 37628, which is a deltaPct of 0.1% in favor of the RTX 4070. The AMD Radeon RX Vega 56 is slightly slower at 37507, while the NVIDIA GeForce RTX 4080 Mobile is faster at 38135.

GPU Role

The NVIDIA GeForce RTX 4070 is the dominant component in this pairing, particularly as resolution increases. Its memory configuration includes 12 GB of GDDR6X on a 192-bit bus, providing a bandwidth of 504.2 GB/s. This memory bandwidth is crucial for feeding the GPU's 5888 shading units at high resolutions. The GPU's architecture, Ada Lovelace, features 46 RT cores and 184 tensor cores, which are relevant for modern game features, though not directly measured in the Palworld FPS data.

The GPU clocks are a base of 1920 MHz with a boost up to 2475 MHz. The boost clock is the most relevant figure for sustained gaming performance, as it represents the maximum speed the silicon is rated to achieve. The difference between the base and boost clocks indicates the GPU's ability to scale its performance under load. In Palworld, the RTX 4070's capabilities are clearly visible in the measured FPS. At 1080p, the GPU is able to push frame rates to 248 FPS on Low settings, demonstrating its raw power. However, the game's demands scale quickly with resolution. The performance figures show a clear trend: the RTX 4070 is the limiting factor at 4K, where even High settings only produce 57 FPS, suggesting that the 12 GB of VRAM and the GPU's compute throughput are being taxed heavily by the game's rendering load at that resolution.

Resolution Scaling

The measured FPS data provides a clear picture of how Palworld scales with resolution for this specific CPU-GPU combo. Moving from 1080p to 1440p and then to 4K shows a consistent and significant drop in performance across all settings, which is a classic indicator of a GPU-bound workload.

At High settings, the average FPS drops from 155 at 1920x1080 to 102 at 2560x1440, a reduction of about 34%. Then, moving from 1440p to 4K, the FPS drops further to 57, a 44% reduction from the 1440p figure. This steep decline as resolution increases confirms that the RTX 4070's rendering capabilities are the primary constraint. The CPU has enough headroom to feed the GPU at lower resolutions, but as the pixel count increases, the GPU's workload grows exponentially, causing the frame rate to plummet.

The scaling pattern is similar for other presets. On Low settings, the FPS drops from 248 at 1080p to 163 at 1440p (a 34% drop), and then to 91 at 4K (a 44% drop). This consistent percentage drop indicates that the bottleneck shifts decisively to the GPU at higher resolutions. The data suggests that the Ryzen 5 5600F is sufficient to keep up with the RTX 4070 at 1080p and even 1440p, as the frame rate differences are primarily driven by the GPU's workload. However, at 4K, the GPU is so heavily loaded that the CPU's performance becomes less relevant to the final frame rate.

Measured FPS Breakdown

This section details the exact average FPS figures from the FACT PACK for each resolution and settings preset.

1920x1080 (1080p):

• Ultra: 117 FPS average.
• High: 155 FPS average.
• Medium: 201 FPS average, with a minimum of 171 FPS and a maximum of 231 FPS.
• Low: 248 FPS average.

At 1080p, the system is clearly GPU-bound only at the highest settings. The jump from Ultra to High is 38 FPS, and from High to Medium is 46 FPS. The Low preset pushes the frame rate to 248 FPS, which is near the limits of many high-refresh-rate monitors.

2560x1440 (1440p):

• Ultra: 77 FPS average.
• High: 102 FPS average.
• Medium: 132 FPS average, with a minimum of 113 FPS and a maximum of 152 FPS.
• Low: 163 FPS average.

1440p presents a sweet spot. The Ultra preset maintains a playable average of 77 FPS, while High settings provide a comfortable 102 FPS. The Medium preset offers a significant boost to 132 FPS, making it ideal for competitive play or high refresh rate displays.

3840x2160 (4K):

• Ultra: 43 FPS average.
• High: 57 FPS average.
• Medium: 73 FPS average, with a minimum of 62 FPS and a maximum of 85 FPS.
• Low: 91 FPS average.

At 4K, the RTX 4070 is pushed to its limits. The Ultra preset is not playable at 43 FPS. The High preset is borderline at 57 FPS. The Medium preset is the minimum recommended for a smooth experience at this resolution, providing 73 FPS, while Low settings offer a more fluid 91 FPS.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution.

For 1080p players, the Ultra preset is very viable with an average of 117 FPS. This provides the best visual experience without sacrificing high frame rates. For those with 144Hz or higher refresh rate monitors, the High preset at 155 FPS is a better choice to fully utilize the display's capabilities.

For 1440p, the High preset is the best recommendation. It delivers 102 FPS, which is smooth and responsive, while offering a significant visual upgrade over Medium. The Ultra preset is also playable at 77 FPS, but the performance cost is high. For players prioritizing high frame rates, the Medium preset at 132 FPS is the best option.

For 4K players, the data clearly shows that Ultra settings are not viable. The Medium preset is the recommended choice, as it is the only preset that maintains a frame rate above 60 FPS (73 FPS average) while still providing a reasonable level of visual quality. The Low preset at 91 FPS is the alternative for those who prioritize frame rate above all else. The High preset at 57 FPS is too close to the 60 FPS threshold and may result in noticeable stutters.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz. Its 32 MB of shared L3 cache is a key feature for gaming performance. In the context of Palworld, the CPU's role is to handle game logic, physics, and AI, while the GPU handles the rendering.

The CPU's benchmark scores provide context for its performance. Its passmark_multithread score is 19236, and its passmark_single_thread score is 2872. The CPU sits in the 85th percentile of all CPUs, indicating it is a strong performer. However, its nearest rivals, such as the Intel Core Ultra 5 225 (avgScore 36938) and the AMD Ryzen 5 5500X3D (avgScore 37018), show that it is not at the top of the heap, but is very competitive.

The FPS data suggests that the Ryzen 5 5600F is not a bottleneck in Palworld for this GPU, except possibly at very low settings and resolutions. At 1080p Low, the system achieves 248 FPS, which is a very high frame rate that could potentially stress the CPU's single-thread performance. However, the data shows that the frame rates scale smoothly with resolution, which is characteristic of a GPU-bound scenario. If the CPU were the limiting factor, we would expect to see similar frame rates across different resolutions at the same settings. Instead, we see significant drops from 1080p to 4K, confirming that the RTX 4070 is the primary constraint. The CPU has enough performance to feed the GPU adequately up to 1440p, and even at 4K, its performance is sufficient to allow the GPU to reach its full potential in this game.