Overpower

Overpower

AVERAGE FPS
80
good

This combination provides smooth gameplay with an average of 80 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 49 59 64 102
1440p QHD 58 69 75 120
1080p Full HD 65 78 84 134

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 102
3840x2160 Medium 64
3840x2160 High 59
3840x2160 Ultra 49
2560x1440 Low 120
2560x1440 Medium 75
2560x1440 High 69
2560x1440 Ultra 58
1920x1080 Low 134
1920x1080 Medium 84
1920x1080 High 78
1920x1080 Ultra 65

Overpower with Intel Core Ultra 9 290K Plus + AMD Radeon RX 6650 XT, In-Depth Analysis

# Overpower with Intel Core Ultra 9 290K Plus + AMD Radeon RX 6650 XT

The Intel Core Ultra 9 290K Plus paired with the AMD Radeon RX 6650 XT delivers playable frame rates at 1080p and 1440p in Overpower, but the combination clearly shows its limits at 4K. The measured data indicates a system where the GPU becomes the dominant constraint as resolution climbs, while the 24-core CPU provides ample headroom across all tested settings. This pairing ranks in the 64th percentile of tested combinations (1922nd out of 2980), suggesting a mid-pack performer that trades high-end CPU capability against a mid-range GPU.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals a consistent pattern of GPU-bound scaling across all settings presets. At Low settings, the average FPS drops from 134 at 1920x1080 to 120 at 2560x1440, then falls further to 102 at 3840x2160 — a total reduction of 32 FPS (23.9%) from 1080p to 4K. This relatively modest percentage decline at Low settings indicates that even at the lowest graphical load, the GPU is still managing the workload without catastrophic scaling losses.

At Medium settings, the scaling curve steepens noticeably. The average frame rate declines from 84 FPS at 1080p to 75 FPS at 1440p, then to 64 FPS at 4K. The minimum FPS at Medium settings follows a similar trajectory: 71 FPS at 1080p, 64 FPS at 1440p, and 54 FPS at 4K. The maximum FPS values at Medium settings — 97 at 1080p, 86 at 1440p, and 73 at 4K — reinforce the pattern of consistent degradation as pixel count rises.

High settings show the steepest absolute drop from 1080p to 4K. The average FPS moves from 78 at 1920x1080 to 69 at 2560x1440, then to 59 at 3840x2160. This represents a 24.4% reduction from 1080p to 4K, nearly identical to the Low preset's percentage decline. However, the absolute numbers are much lower at High settings, meaning the user experiences a more tangible performance hit at higher resolutions.

Ultra settings produce the lowest frame rates of any preset, with averages of 65 FPS at 1080p, 58 FPS at 1440p, and 49 FPS at 4K. The 4K Ultra result of 49 FPS is the only sub-50 FPS average in the entire measured dataset, and it falls below the 60 FPS threshold typically associated with smooth gameplay. The scaling from 1080p Ultra to 4K Ultra shows a 16 FPS drop (24.6%), which is proportionally similar to other presets but lands at a lower absolute starting point.

The data indicates that the limiting component shifts decisively toward the GPU as resolution increases. At 1080p, the RX 6650 XT still delivers 134 FPS at Low settings, suggesting the GPU has headroom even with the powerful CPU. But by 4K, even the Low preset drops to 102 FPS, and Ultra falls to 49 FPS — a clear sign that the 8 GB VRAM and 128-bit memory bus are struggling to feed the framebuffer at higher pixel counts. The consistent ~24% scaling penalty across presets from 1080p to 4K points to a GPU-bound scenario where the CPU's 24 cores are not the bottleneck.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor based on the Arrow Lake Refresh architecture, manufactured on a 3 nm process by TSMC. Its base clock of 3.70 GHz boosts to 5.80 GHz, and it carries 36 MB of shared L3 cache alongside 3 MB of L2 cache per core. The CPU's benchmark scores reflect a high-end desktop part: it achieves a Cinebench R23 multi-core score of 51731 and a single-core score of 7303, placing it in the 96th percentile of all CPUs.

In the context of Overpower, the CPU's role appears secondary to the GPU at higher resolutions. The measured frame rates show that even at 4K Low settings, the system achieves 102 FPS — a result that would be impossible if the CPU were the limiting factor. The 24 cores and 24 threads provide substantial parallel processing capability, which the PassMark multi-thread score of 60860 and data compression score of 698346 reflect. These scores suggest the CPU can handle heavy background workloads without impacting gaming performance.

The single-thread performance, as measured by the Cinebench R23 single-core score of 7303, is equally important for Overpower's game logic and physics calculations. The boost clock of 5.80 GHz provides high-frequency single-core execution, which is typically what action games rely on for frame pacing and input responsiveness. The PassMark single-thread score of 4823 corroborates this strength.

Comparing to nearest rivals, the Core Ultra 9 290K Plus' average benchmark score of 84003 is 0.2% higher than the Intel Core Ultra 9 285K at 83807, and 1.1% above the AMD EPYC 4584PX at 83090. It trails the AMD EPYC 7F72 by 1.3% (85072 vs 84003). These deltas are small — all within 1.3% — meaning the CPU's performance in compute-heavy tasks is essentially on par with its closest competitors. For Overpower specifically, the CPU has enough headroom that these minor differences are unlikely to manifest as measurable frame rate changes.

The CPU's memory bandwidth of 115.2 GB/s over dual-channel DDR5 provides adequate data throughput for feeding the GPU. The PCIe Gen 5 interface with 20 lanes from the CPU ensures the RX 6650 XT receives data at full bandwidth, though the GPU itself only supports PCIe 4.0 x8. This mismatch does not appear to create a bottleneck in the measured data, as the frame rates scale predictably with resolution rather than showing erratic CPU-related stutters.

GPU Role

The AMD Radeon RX 6650 XT is a RDNA 2.0 architecture GPU built on TSMC's 7 nm process, featuring 2048 shading units, 128 texture mapping units, and 64 raster operations pipelines. Its boost clock reaches 2635 MHz, with a game clock of 2410 MHz and a base clock of 2055 MHz. The GPU is equipped with 8 GB of GDDR6 memory on a 128-bit bus, delivering 280.3 GB/s of memory bandwidth. Its FP32 performance is rated at 10.79 TFLOPS, and it supports DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6.

The GPU's benchmark results place it in the 65th percentile of all GPUs, with an average benchmark score of 19765. Its nearest rivals are all workstation-class cards: the NVIDIA Tesla K40m (19885, 0.6% higher), the AMD FirePro D300 (19637, 0.7% lower), the AMD FirePro W7000 (19905, 0.7% higher), and the NVIDIA Quadro K5200 (19602, 0.8% lower). These deltas are minimal, indicating the RX 6650 XT sits in a narrow performance band relative to these older professional GPUs, though its gaming-oriented feature set is more relevant for Overpower.

In Overpower, the GPU's 8 GB VRAM capacity becomes a critical factor at 4K resolution. The measured frame rates show a steep decline from 1080p to 4K across all presets, with the Ultra preset dropping from 65 FPS to 49 FPS. The 4K High setting at 59 FPS and 4K Medium at 64 FPS both sit near the edge of playability, while 4K Low at 102 FPS demonstrates that the GPU can still perform well when texture and shading demands are reduced.

The GPU's memory bandwidth of 280.3 GB/s is a limiting factor at higher resolutions. The 128-bit bus width constrains how much data can be transferred between the VRAM and the GPU cores, which becomes more pronounced as pixel count increases. This explains why the frame rate scaling from 1080p to 4K is roughly linear — the GPU is consistently memory-bandwidth-limited rather than compute-limited.

The 176 W TDP and single 8-pin power connector suggest the RX 6650 XT is a modestly powered card, and its dual-slot design keeps thermals manageable. The pixel rate of 168.6 GPixel/s and texture rate of 337.3 GTexel/s provide adequate fill rates for 1080p gaming, but at 4K, these rates become insufficient to maintain 60+ FPS at higher presets. The 32 ray tracing cores are present but the measured data does not include ray tracing performance, so their impact on Overpower cannot be quantified from this dataset.

How This Combo Ranks

The Intel Core Ultra 9 290K Plus + AMD Radeon RX 6650 XT combination ranks 1922nd out of 2980 tested combos in Overpower, placing it in the 64th percentile. This mid-pack ranking reflects the asymmetry of the pairing: a top-tier CPU (96th percentile) mated with a mid-range GPU (65th percentile) results in a system that performs below what the CPU alone might suggest, but above what the GPU's percentile implies for gaming.

The ranking suggests that in Overpower, the GPU is the primary determinant of overall combo performance. The CPU's 96th percentile standing is largely wasted at 4K where the GPU becomes the bottleneck, but at 1080p and 1440p, the CPU's headroom ensures the GPU is fully utilized. The measured frame rates at 1080p Low (134 FPS) and 1440p Low (120 FPS) indicate the GPU can deliver high frame rates when not constrained by resolution, and the CPU's 24 cores do not hold it back.

Relative to other combos, this pairing is neither a top performer nor a bottom dweller. The 1922nd rank out of 2980 means roughly 64% of tested combinations outperform it, while 36% fall below. This positions the combo as a viable mid-range gaming solution, particularly for users who prioritize 1080p or 1440p gaming over 4K. The CPU's strength suggests that users could upgrade the GPU later without changing the processor, as the Core Ultra 9 290K Plus has substantial headroom for more powerful graphics cards.

The delta between CPU and GPU percentiles (96th vs 65th) indicates a potential imbalance for gaming workloads. A more evenly matched pairing would typically show smaller percentile differences. However, for Overpower specifically, the measured data shows the combo handles all resolutions up to 1440p with playable frame rates, making the imbalance less impactful in practice.

Settings Recommendations

Based on the measured frame rates, the optimal settings preset depends on the target resolution and desired frame rate. At 1920x1080, the Medium preset delivers an average of 84 FPS with a minimum of 71 FPS and maximum of 97 FPS — a solid balance of visual quality and performance. The High preset at 1080p averages 78 FPS, which is still smooth, while Ultra drops to 65 FPS. For users prioritizing frame rate over visual fidelity, the Low preset at 134 FPS offers maximum responsiveness.

At 2560x1440, the Medium preset again provides the best balance, averaging 75 FPS with a minimum of 64 FPS and maximum of 86 FPS. The High preset at 69 FPS is also playable, while Ultra at 58 FPS approaches the lower boundary of acceptable smoothness. The Low preset at 120 FPS remains an option for competitive play, though the visual compromise is significant.

At 3840x2160, the recommendations change dramatically. The Medium preset at 64 FPS is the only preset that consistently clears the 60 FPS threshold, though its minimum of 54 FPS indicates occasional dips below that mark. The High preset at 59 FPS is borderline, while Ultra at 49 FPS and Low at 102 FPS round out the options. For 4K gaming, the Medium preset is the recommended choice, as it delivers the best combination of visual quality and playable frame rates.

The Ultra preset at any resolution above 1080p does not provide a compelling experience relative to Medium. At 1440p Ultra, the 58 FPS average is only 17 FPS lower than Medium, but the visual fidelity gain is marginal for the performance cost. At 4K Ultra, the 49 FPS average falls below the 60 FPS target, making it suitable only for users who prioritize image quality over smoothness and are willing to accept sub-60 FPS performance.

The measured data suggests that the Medium preset is the sweet spot for this combo across all resolutions. It provides a 60+ FPS average at 1080p and 1440p, and just barely misses it at 4K (64 FPS average). Users seeking higher frame rates should drop to Low settings, while those willing to sacrifice performance for visuals can explore High or Ultra with the understanding that frame rates will decrease accordingly.

FAQ

Q: What is the best resolution for this combo in Overpower?

A: The measured data shows the strongest performance at 1920x1080, where all presets exceed 65 FPS average. At 2560x1440, Medium and High settings maintain 75 FPS and 69 FPS respectively, while 3840x2160 only achieves 64 FPS at Medium — making 1440p the highest resolution where all tested presets remain playable.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core Ultra 9 290K Plus has an average benchmark score of 84003, which is 0.2% higher than the Intel Core Ultra 9 285K (83807) and 1.1% higher than the AMD EPYC 4584PX (83090). It trails the AMD EPYC 7F72 by 1.3% (85072), indicating all four processors perform within a narrow 1.3% band.

Q: Does the GPU bottleneck the CPU at 4K?

A: Yes. The frame rate scaling from 1080p to 4K shows a consistent ~24% drop across presets, with 4K Ultra falling to 49 FPS. The GPU's 8 GB VRAM and 128-bit memory bus become limiting factors at higher resolutions, while the CPU's 24 cores remain underutilized.

Q: What is the minimum FPS at Medium settings across resolutions?

A: At 1920x1080 Medium, the minimum FPS is 71. At 2560x1440 Medium, it drops to 64. At 3840x2160 Medium, the minimum is 54 FPS. These values indicate that the Medium preset maintains playable frame rates at all tested resolutions, though 4K approaches the lower limit.

Q: How does the GPU rank relative to its nearest competitors?

A: The AMD Radeon RX 6650 XT has an average benchmark score of 19765. The NVIDIA Tesla K40m scores 19885 (0.6% higher), the AMD FirePro D300 scores 19637 (0.7% lower), the AMD FirePro W7000 scores 19905 (0.7% higher), and the NVIDIA Quadro K5200 scores 19602 (0.8% lower). All rivals are within 0.8% of the RX 6650 XT.

Q: Is the Ultra preset viable at any resolution?

A: At 1920x1080, Ultra averages 65 FPS, which is playable. At 2560x1440, Ultra drops to 58 FPS, which is borderline. At 3840x2160, Ultra averages 49 FPS, which falls below the 60 FPS threshold. The Medium preset provides better performance at all resolutions with minimal visual compromise.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 6650 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2635 MHz MHz
TDP 176 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + AMD Radeon RX 6650 XT in Overpower

Resolution Settings Avg FPS
3840x2160 Low 102.0
3840x2160 Medium 64.0
3840x2160 High 59.0
3840x2160 Ultra 49.0
2560x1440 Low 120.0
2560x1440 Medium 75.0
2560x1440 High 69.0
2560x1440 Ultra 58.0
1920x1080 Low 134.0
1920x1080 Medium 84.0
1920x1080 High 78.0
1920x1080 Ultra 65.0

Overpower with iUltra 9 290K Plus + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RX 6650 XT + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RX 6650 XT

Explore FPS benchmarks for other games using this same hardware combination.