Overpower

Overpower

AVERAGE FPS
154
excellent

This combination delivers exceptional performance with an average of 154 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 95 113 126 199
1440p QHD 109 132 144 233
1080p Full HD 124 150 162 258

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 199
3840x2160 Medium 126
3840x2160 High 113
3840x2160 Ultra 95
2560x1440 Low 233
2560x1440 Medium 144
2560x1440 High 132
2560x1440 Ultra 109
1920x1080 Low 258
1920x1080 Medium 162
1920x1080 High 150
1920x1080 Ultra 124

Overpower with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis

Overpower is a demanding Action title, and the combination of the Intel Core Ultra 7 265K with the NVIDIA GeForce RTX 5070 Ti produces a wide spread of frame rates depending on how you configure it. The data shows a system that is heavily influenced by graphics settings, with the CPU providing a robust foundation that rarely becomes the limiting factor, even at high resolutions.

Resolution Scaling

The measured FPS data reveals a clear pattern of diminishing returns as resolution increases, but the magnitude of the drop is highly dependent on the quality preset. Moving from 1920x1080 to 2560x1440 at Low settings, the average frame rate falls from 258.2 FPS to 233.0 FPS, a reduction of about 10%. The same resolution jump at Ultra settings sees a smaller relative decline, from 123.6 FPS to 108.9 FPS, which is roughly a 12% decrease. This suggests that at lower settings, the system is less constrained by the GPU, allowing the CPU's performance to shine.

The scaling becomes more pronounced when stepping up to 3840x2160. At Low settings, the average FPS drops to 199.1, a significant 14.5% decrease from the 1440p result. However, the most telling data point is at Ultra settings: the 4K average of 95.2 FPS is only 12.6% lower than the 1440p Ultra average of 108.9 FPS. This indicates that at 4K Ultra, the load has shifted almost entirely to the GPU, and the frame rate is being dictated by the graphics card's raw throughput rather than any CPU limitation. The gap between Low and Ultra settings at 4K is a massive 103.9 FPS, which highlights how much headroom the CPU has in this title.

How This Combo Ranks

In the grand scheme of tested hardware, this specific pairing of the Core Ultra 7 265K and RTX 5070 Ti achieves a combo rank of 134 out of 1744 tested combinations. This places it in the top 8% of all configurations, which is a strong showing for a high-end desktop setup. The rank suggests that while this is not the absolute fastest possible combination for Overpower, it is significantly faster than the vast majority of systems that have been benchmarked.

The high rank is a direct result of both components performing near the top of their respective tiers. The CPU's average benchmark score of 79102 places it in the 97th percentile of all CPUs, and the GPU's average score of 52086 places it in the 87th percentile of all GPUs. When paired, their combined strength puts them well ahead of the typical system, but the data also shows that there is still a performance ceiling above them, occupied by even more powerful hardware. For a builder targeting high-refresh-rate 1440p or smooth 4K gameplay, this rank indicates a very capable foundation.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor based on the Arrow Lake architecture, built on a 3 nm process. Its base clock of 3.90 GHz can boost up to 5.50 GHz, and it has a substantial 30 MB of shared L3 cache. In Overpower, the CPU's role is to feed the GPU with enough data to keep it busy, and the benchmark results indicate it does this effortlessly. The single-threaded performance, as shown by a Cinebench R23 single-core score of 7060, is strong enough to handle the game's primary game thread without becoming a bottleneck.

The multi-core capabilities are also relevant, as the Cinebench R23 multi-core score of 50009 demonstrates that even if Overpower were to utilize more threads, there is ample headroom. The fact that the FPS scales so dramatically when lowering resolution and settings—from 95.2 FPS at 4K Ultra to 258.2 FPS at 1080p Low—reflects the CPU's ability to push frame rates far beyond what most displays can show. This is a processor that will not hold back the RTX 5070 Ti in this title, as the performance ceiling appears to be far higher than what the GPU can deliver at any settings.

Measured FPS Breakdown

The measured results provide a complete picture of performance across common gaming configurations. At 1920x1080, the system is exceptionally fast. The Low preset yields an average of 258.2 FPS, which is a remarkable figure for a modern action game. Moving up the quality ladder, Medium produces 161.6 FPS, High delivers 149.7 FPS, and Ultra still maintains a very playable 123.6 FPS. The difference between Low and Ultra at 1080p is 134.6 FPS, showing that the settings have a massive impact on the frame rate, but even the most demanding preset is far above the 60 FPS threshold.

At 2560x1440, the performance remains excellent. The Low preset averages 233.0 FPS, while Medium drops to 144.4 FPS. High settings produce 132.1 FPS, and Ultra is still very smooth at 108.9 FPS. This resolution is arguably the sweet spot for this combo, as it offers a significant visual upgrade over 1080p while still maintaining frame rates that can take full advantage of high-refresh-rate monitors. The scaling from 1080p to 1440p is relatively modest, with the Ultra preset dropping only about 11.9% in performance.

At 3840x2160, the GPU begins to feel the pressure. The Low preset still manages a high average of 199.1 FPS, but the quality presets show a steeper decline. Medium drops to 125.9 FPS, High falls to 113.2 FPS, and Ultra yields a still-strong 95.2 FPS. The data shows that 4K Ultra is the first configuration where the system dips below the 100 FPS average mark, but it remains comfortably above 60 FPS. This indicates that for 4K gaming, the user will need to make a choice between maximum visual fidelity and the highest possible refresh rate, but the system is capable of both to a degree.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the primary driver of frame rates in Overpower, especially at higher resolutions. It features 16 GB of GDDR7 memory on a 256-bit bus, providing 896.0 GB/s of bandwidth, which is crucial for 4K textures. The GPU's boost clock of 2452 MHz and its 8960 shading units deliver substantial raw compute power, as reflected in its 3DMark Steel Nomad score of 6604. The data shows that this GPU is the main factor in the FPS differences between presets.

The performance scaling from Low to Ultra is largely dictated by the GPU's fill rate and shader complexity. At 1080p, the GPU is not fully taxed, and the frame rates are likely limited by the game engine's draw call processing, though the CPU is clearly keeping up. As the resolution increases to 1440p and then 4K, the GPU's workload grows, and the direct impact of the graphics settings becomes more apparent. The 95.2 FPS at 4K Ultra versus the 199.1 FPS at 4K Low shows a 109% performance swing, which is entirely attributable to the GPU's ability to handle the increased shading and texture work. This is a card that is built for high-end 1440p and capable 4K gaming, and the data confirms it can handle Overpower with ease.

Settings Recommendations

For players with a 1920x1080 display, the Ultra preset is the clear choice. The 123.6 FPS average is well above the threshold for smooth gameplay, and the visual quality improvements are worth the performance cost. There is no practical reason to drop below High, as the 149.7 FPS average provides extra headroom for 144Hz monitors, but the difference in visual fidelity between High and Ultra is often significant.

At 2560x1440, the High preset offers the best balance of visual quality and performance, with an average of 132.1 FPS. This is ideal for 144Hz displays. The Ultra preset at 108.9 FPS is also an excellent option for those who prefer maximum detail, as it remains comfortably above 100 FPS. Dropping to Medium is not recommended unless targeting very high refresh rates, as the 144.4 FPS average does not represent a massive gain over High.

For 3840x2160, the choice depends on the display's refresh rate. If using a 60Hz display, the Ultra preset at 95.2 FPS is the best experience, providing a fully maxed-out visual presentation. For higher refresh rate 4K displays, the High preset at 113.2 FPS is the recommended starting point, as it offers a noticeable performance boost with only a minor reduction in graphical fidelity. The Medium preset at 125.9 FPS is a viable fallback, but the data shows that the step from High to Ultra is less punishing than the step from Medium to High, making High the smarter default for 4K.

Hardware Specifications

Intel Core Ultra 7 265K

Cores / Threads 20 / 20
Base Clock 3900 MHz
Boost Clock 5500 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 5070 Ti

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2452 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5070 Ti in Overpower

Resolution Settings Avg FPS
3840x2160 Low 199.1
3840x2160 Medium 125.9
3840x2160 High 113.2
3840x2160 Ultra 95.2
2560x1440 Low 233.0
2560x1440 Medium 144.4
2560x1440 High 132.1
2560x1440 Ultra 108.9
1920x1080 Low 258.2
1920x1080 Medium 161.6
1920x1080 High 149.7
1920x1080 Ultra 123.6

Overpower with iUltra 7 265K + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RTX 5070 Ti + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with iUltra 7 265K + RTX 5070 Ti

Explore FPS benchmarks for other games using this same hardware combination.