Overpower

The Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 4080 delivers a high-refresh-rate experience in Overpower across all tested settings. The data shows a configuration that is heavily GPU-limited at higher resolutions, while the CPU proves sufficient to feed the graphics card at 1080p. This analysis breaks down the measured performance, contextualizes it against other tested combinations, and examines the specific roles of the processor and graphics card in shaping the final frame rates.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases, which is typical for a GPU-bound scenario. At 1080p with Low settings, the combo achieves an average of 271 FPS. Moving to 1440p Low drops this to 241 FPS, a reduction of 30 FPS or approximately 11%. At 4K Low, the average falls to 205 FPS, which is 66 FPS lower than the 1080p result. This scaling indicates that even at the lowest graphical preset, the rendering load is substantial enough to prevent the frame rate from scaling linearly with pixel count.

The High preset shows a similar but more pronounced drop. Starting at 157 FPS in 1080p, the average decreases to 140 FPS at 1440p and further to 119 FPS at 4K. The delta between 1080p and 4K at High settings is 38 FPS, or roughly 24%. For the Ultra preset, the averages are 130 FPS at 1080p, 116 FPS at 1440p, and 99 FPS at 4K. The 31 FPS difference between 1080p Ultra and 4K Ultra represents a 24% reduction, mirroring the percentage drop seen at High settings.

The Medium preset provides the most complete data with min and max FPS values. At 1080p Medium, the average is 169 FPS with a range from 144 to 194 FPS. At 1440p Medium, the average drops to 151 FPS, with a range of 128 to 173 FPS. At 4K Medium, the average is 128 FPS, and the range narrows to 109 to 147 FPS. The scaling from 1080p to 4K at Medium is a 41 FPS drop, or 24.3%.

These results suggest that the RTX 4080 is the primary limiting component across all resolutions. The consistent percentage drops between resolutions, regardless of the preset, point to a graphics card that is being saturated by the increasing pixel count. The CPU does not appear to be a bottleneck at any point, as the frame rates remain high even at 1080p, where the CPU load is typically highest. The data indicates that for users targeting 4K, the GPU will be the deciding factor for achieving higher frame rates, while at 1080p, the headroom is substantial.

How This Combo Ranks

In the database of tested combinations for Overpower, this specific pairing of the Intel Core Ultra 5 245 and the NVIDIA GeForce RTX 4080 holds the rank of 201 out of 3713 total combos. This places the configuration in the top 5.4% of all tested systems, a strong showing that reflects the high performance ceiling of the RTX 4080. The percentile ranking for the GPU alone is 86, meaning it outperforms 86% of all graphics cards in the database. The CPU's percentile is 90, outperforming 90% of all processors.

The combo's rank is more heavily influenced by the GPU than the CPU, given the resolution-dependent nature of the performance scaling. The RTX 4080's average benchmark score is 54247, which is nearly 11% higher than the CPU's average benchmark score of 48995. This difference in raw compute power helps explain why the GPU is the dominant factor in determining the final frame rates in Overpower.

When compared to its nearest rivals, the RTX 4080 sits in a tight performance band. It is 0.1% ahead of the NVIDIA GeForce RTX 4080 SUPER in average benchmark score, while being 1.1% behind the AMD Radeon Pro W5700X and 2.6% behind the AMD Radeon RX 6750 GRE 12 GB. These small deltas suggest that in the broader GPU landscape, the 4080 is positioned very close to several other high-end cards. However, the combo rank of 201 out of 3713 indicates that the pairing with the Core Ultra 5 245 is more than capable of delivering a top-tier gaming experience.

The CPU's nearest rivals also show a tight cluster of performance. The Core Ultra 5 245 is 0.4% behind the AMD Ryzen 7 PRO 5755G and 0.5% behind the AMD Ryzen 9 7900, while being 0.6% ahead of the Intel Xeon Gold 5318H and 0.8% ahead of the Intel Core i5-14600K. This data confirms that the processor is not a limiting factor, as its performance is in line with other high-end CPUs that would typically be paired with a card like the RTX 4080.

GPU Role

The NVIDIA GeForce RTX 4080 is the central component in this configuration, and its specifications directly explain the observed frame rates. The GPU features 16 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 716.8 GB/s. This memory configuration is well-suited for high-resolution textures and demanding effects, allowing the card to maintain stable performance at 4K without running out of memory or bandwidth.

The GPU's clock speeds are set at a base of 2205 MHz and a boost of 2505 MHz. These relatively high clocks, combined with the Ada Lovelace architecture's efficiency, contribute to the card's ability to deliver over 100 FPS at 4K Ultra in Overpower. The boost clock is particularly important for sustained performance during extended gaming sessions, as it allows the card to push beyond its base frequency when thermal and power headroom permit.

The RTX 4080's compute capabilities are substantial, with 9728 shading units and a peak FP32 throughput of 48.74 TFLOPS. This level of raw compute power is what allows the card to handle the complex shaders and physics calculations present in a modern Action game like Overpower. The card also includes 76 RT cores and 304 tensor cores, which, while not directly benchmarked in this test, contribute to the card's overall feature set and future-proofing for ray-traced titles.

The measured results show that the RTX 4080 scales predictably with settings. At 4K, the average FPS ranges from 205 at Low to 99 at Ultra. The difference of 106 FPS between these two presets highlights the significant load that Ultra settings place on the GPU. The 16 GB VRAM is likely sufficient for all tested presets, as no signs of memory-related stuttering or frame drops are present in the min FPS data for Medium settings. The GPU's performance is consistent with its position in the database, ranking in the 86th percentile of all GPUs.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the combo's performance across three resolutions and four settings presets. At 1920x1080, the configuration is capable of very high frame rates, with the Low preset averaging 271 FPS. The Medium preset averages 169 FPS, with a minimum of 144 FPS and a maximum of 194 FPS. High settings reduce the average to 157 FPS, while Ultra settings bring it down to 130 FPS. All 1080p results are well above the 144 Hz refresh rate threshold, making this resolution ideal for competitive play.

Moving to 2560x1440, the frame rates remain high but begin to show the GPU's workload. The Low preset averages 241 FPS, which is still exceptionally fast. Medium settings average 151 FPS, with a range of 128 to 173 FPS. High settings drop the average to 140 FPS, and Ultra settings produce an average of 116 FPS. The 1440p results indicate that the combo is still capable of driving high-refresh-rate monitors, though Ultra settings will require a monitor with adaptive sync to handle the variance.

At 3840x2160, the performance is more demanding. The Low preset averages 205 FPS, which is still very playable. Medium settings average 128 FPS, with a minimum of 109 FPS and a maximum of 147 FPS. High settings produce an average of 119 FPS, and Ultra settings bring the average down to 99 FPS. The 4K data shows that the combo can maintain smooth gameplay at High settings, but the Ultra preset hovers near the 100 FPS mark, which is below the refresh rate of many high-end 4K monitors.

The data for Medium settings is the only set with complete min and max FPS values. At 1080p, the 144 FPS minimum is still high, indicating consistent frame delivery. At 1440p, the 128 FPS minimum is solid. At 4K, the 109 FPS minimum shows that even in the most demanding scenes, the frame rate does not dip below a playable threshold. This consistency across resolutions suggests that the RTX 4080 has enough headroom to avoid major frame-time spikes.

CPU Role

The Intel Core Ultra 5 245 plays a supporting role in this configuration, but its specifications ensure it does not bottleneck the RTX 4080. The processor features 14 cores and 14 threads, with a base clock of 3.50 GHz and a boost clock of 5.10 GHz. This combination of a high boost clock and a moderate core count is well-suited for gaming, where single-threaded performance often matters more than raw multi-threaded throughput.

The CPU's cache hierarchy includes 192 KB of L1 cache per core, 3 MB of L2 cache per core, and a shared 24 MB L3 cache. This cache configuration helps reduce memory latency and improves gaming performance by keeping frequently accessed data close to the cores. The processor is built on a 3 nm process node from TSMC, which contributes to its 65 W TDP and efficient power consumption, allowing it to sustain high boost clocks without excessive heat.

In the benchmark data, the Core Ultra 5 245 achieves a Cinebench R23 multi-core score of 32924 and a single-core score of 4648. The single-core score is particularly relevant for gaming, as it indicates strong per-core performance. The PassMark single-thread score of 4394 further confirms this. The CPU's percentile ranking of 90 versus all CPUs indicates that it outperforms the vast majority of processors available, ensuring it is not a weak link in the system.

The measured FPS data supports this conclusion. At 1080p Low, the combo achieves 271 FPS, which is a frame rate that would typically stress a CPU. Since the frame rate remains high and scales consistently with resolution, it is clear that the CPU is delivering frames faster than the GPU can render them. The CPU's nearest rivals, including the AMD Ryzen 9 7900 and Intel Core i5-14600K, have very similar average benchmark scores, suggesting that swapping the processor would yield minimal performance changes in Overpower.

Settings Recommendations

The measured data provides clear guidance on the optimal settings for different priorities. For players seeking the highest possible frame rates, the Low preset is the obvious choice. At 1080p, it delivers 271 FPS, and even at 4K, it maintains an average of 205 FPS. This preset is ideal for competitive gaming where response time and smoothness are paramount.

For a balance between visual quality and performance, the Medium preset is the recommended choice. It offers a significant improvement in visual fidelity over Low while maintaining high frame rates across all resolutions. At 1080p, the average is 169 FPS, which is still well above the 144 Hz threshold. At 1440p, the average of 151 FPS is excellent. Even at 4K, the 128 FPS average with a minimum of 109 FPS provides a smooth experience on most displays. The Medium preset is the most versatile option, as it delivers playable frame rates at all tested resolutions.

The High preset is a viable option for users with 1440p or 4K monitors who prioritize visual quality. At 1440p, it averages 140 FPS, which is still very smooth. At 4K, the 119 FPS average is playable, though it is closer to the 120 Hz refresh rate boundary. The Ultra preset should be reserved for users with high-refresh-rate 1080p monitors or those who are willing to accept lower frame rates for maximum visual fidelity. At 1080p Ultra, the 130 FPS average is excellent, but at 4K Ultra, the 99 FPS average may be below the target refresh rate for some users.

The data suggests that the Medium preset offers the best overall experience across all resolutions. It provides a substantial visual upgrade over Low while maintaining frame rates that are suitable for both competitive and immersive gameplay. For 4K users, the High preset is a strong alternative if visual quality is the top priority, as the 119 FPS average is close to the Medium preset's 128 FPS.

FAQ

Q: What is the highest average frame rate this combo achieves in Overpower?

A: The highest average frame rate is 271 FPS, achieved at 1920x1080 resolution with the Low preset.

Q: Is the RTX 4080 the limiting component at 4K resolution?

A: Yes. The frame rate drops from 157 FPS at 1080p High to 119 FPS at 4K High, a 24% reduction. This consistent percentage drop across presets indicates the GPU is the primary bottleneck at higher resolutions.

Q: How does this combo rank against other tested configurations in Overpower?

A: This combo ranks 201 out of 3713 total tested combos, placing it in the top 5.4% of all systems.

Q: What is the minimum FPS recorded at 1440p Medium settings?

A: The minimum FPS at 2560x1440 with Medium settings is 128 FPS, with a maximum of 173 FPS and an average of 151 FPS.

Q: Does the Intel Core Ultra 5 245 bottleneck the RTX 4080 in this game?

A: No. The CPU's single-core score of 4648 in Cinebench R23 and its 90th percentile ranking indicate it has enough performance to feed the GPU, as evidenced by the high frame rates at 1080p.

Q: Which settings preset provides the best balance of visual quality and performance?

A: The Medium preset offers the best balance. It maintains an average of 169 FPS at 1080p, 151 FPS at 1440p, and 128 FPS at 4K, while providing a significant visual upgrade over the Low preset.