Overpower

The Intel Core Ultra 5 135H paired with the NVIDIA GeForce RTX 4070 Mobile delivers a compelling 1080p and 1440p experience in Overpower, but the data reveals a predictable ceiling at 4K. This combination sits in the 54th percentile of tested combos, indicating a balanced mid-to-high-tier setup that leans on its modern architecture to maintain playable frame rates across most settings. The benchmark results show a system that is clearly GPU-limited at higher resolutions, while the CPU provides ample headroom at lower settings.

Resolution Scaling

The frame rate drop from 1080p to 4K in Overpower is steep and tells a clear story about the limiting component. At Low settings, the average FPS falls from 153 at 1920x1080 to 116 at 3840x2160, a reduction of 37 FPS or roughly 24%. This scaling is relatively mild, suggesting that at Low settings, the system is not entirely bound by the GPU, as the CPU and memory bandwidth can still feed the renderer adequately at 4K. However, the gap widens significantly as graphical fidelity increases.

At High settings, the average FPS drops from 89 at 1080p to 67 at 4K, a 22 FPS decline (about 25%). The Medium preset shows a similar pattern, with 96 FPS at 1080p falling to 73 FPS at 4K. The most demanding Ultra preset sees the biggest absolute drop, from 74 FPS at 1080p down to 56 FPS at 4K, an 18 FPS reduction (approximately 24%). These consistent percentage drops across all settings indicate that the scaling is primarily driven by the GPU's pixel throughput capabilities rather than a sudden CPU bottleneck. The RTX 4070 Mobile’s 8 GB of GDDR6 memory and 256.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K resolution demands more from the 128-bit memory bus, which is reflected in the lower averages.

The data implies that 4K gaming is only viable at Low or Medium settings, where the average FPS stays above 73. At High and Ultra, the 56-67 FPS range is playable but not ideal for fast-paced action. The scaling pattern suggests that the GPU’s 15.62 TFLOPS of FP32 performance is the hard limit at 4K, while the CPU’s 14 cores and 18 threads remain underutilized. For a smoother 4K experience, reducing settings is necessary, as the component hierarchy clearly prioritizes the GPU as the primary bottleneck at that resolution.

How This Combo Ranks

Within the database of 3,713 tested combinations, this specific pairing of the Core Ultra 5 135H and RTX 4070 Mobile achieves a rank of 2,005 for Overpower. This places it almost exactly in the middle of the pack, at the 54th percentile. This is a noteworthy position because it shows that while the components are individually strong, the combination does not break into the top tier for this particular title. The rank suggests that there are many other builds that can outperform this setup, likely those with higher-end desktop GPUs or more powerful mobile variants.

The GPU’s individual performance metrics help contextualize this rank. The RTX 4070 Mobile scores an average benchmark score of 27,435, which places it in the 73rd percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6700 XT with a score of 27,425 (a 0% delta) and the NVIDIA GeForce RTX 3090 with 27,565 (a -0.5% delta). This indicates that the mobile 4070 is performing on par with a previous-generation desktop card like the RTX 3090 in synthetic tests, yet the combo rank in Overpower is only mid-tier. This discrepancy suggests that Overpower may be more sensitive to memory bandwidth or driver optimization than raw compute power.

The CPU, meanwhile, scores an average of 29,093, placing it in the 81st percentile. Its nearest rival is the AMD Ryzen 7 5800X with a score of 29,123 (a -0.1% delta). The fact that this mobile CPU is within 0.1% of a desktop Ryzen 7 5800X is impressive, but it does not translate to a top-tier rank in this game. The data implies that Overpower is heavily GPU-bound, as the high CPU percentile does not lift the combo rank correspondingly. The 54th percentile combo rank is a sobering reminder that a strong CPU cannot compensate for a mid-range GPU in a graphically intensive action title at high resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 Mobile is the primary driver of performance in Overpower, and its specifications dictate the frame rates observed. The GPU features 4,608 shading units, 144 texture mapping units, and 48 raster output pipelines, which are substantial numbers for a mobile part. Its base clock of 1395 MHz and boost clock of 1695 MHz are relatively modest, but they are backed by 36 RT cores and 144 tensor cores, which can accelerate certain rendering features.

The 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 256.0 GB/s. This is the most likely limiting factor for 4K performance. At 4K Ultra, the average FPS drops to 56, which is below the 60 FPS target most gamers prefer. The memory clock is listed as 2000 MHz with 16 Gbps effective speed, which is standard for this class. The GPU’s pixel rate of 81.36 GPixel/s and texture rate of 244.1 GTexel/s are high, but the 128-bit bus creates a bottleneck when moving large amounts of texture data at higher resolutions.

The benchmark data shows that the GPU scales predictably with settings. At 1080p, the difference between Low (153 FPS) and Ultra (74 FPS) is 79 FPS, indicating that the GPU can handle the geometry and shader load but is constrained by the fill rate at Ultra. The 4K results show a compression of this range: Low yields 116 FPS, while Ultra yields only 56 FPS. This compression is a classic sign of memory bandwidth saturation. The GPU’s passmark G3D score of 19,587 places it in the 73rd percentile, but its direct rival, the RTX 3090, has a higher score (27,565) yet only a -0.5% delta in average benchmark score. This suggests that the mobile 4070 is well-optimized for its power envelope, but it cannot escape the physical limits of its 128-bit memory interface in a title like Overpower.

FAQ

Q: What is the average FPS at 1080p with Medium settings?

A: The average FPS is 96, with a minimum of 81 and a maximum of 110, according to the measured data.

Q: How does the RTX 4070 Mobile compare to the AMD Radeon RX 6700 XT?

A: The average benchmark score for the RTX 4070 Mobile is 27,435, while the RX 6700 XT scores 27,425, resulting in a 0% delta, indicating near-identical synthetic performance.

*Q: Can this combo handle 4K Ultra settings in Overpower?*

A: The data shows an average of 56 FPS at 3840x2160 with Ultra settings, which is below the 60 FPS threshold, suggesting it is not ideal for smooth 4K Ultra gameplay.

Q: What is the combo's rank among all tested systems?

A: This specific combination ranks 2,005 out of 3,713 tested combos for Overpower, placing it in the 54th percentile.

Q: Is the CPU or GPU the main bottleneck at 1440p High settings?

A: At 2560x1440 High, the average FPS is 79. Given the CPU’s high percentile (81st) and the GPU’s lower percentile (73rd), the data implies the GPU is the limiting factor at this resolution.

Q: What are the core and thread counts of the Intel Core Ultra 5 135H?

A: The CPU has 14 cores and 18 threads, with a boost clock of 4.60 GHz and a base clock of 3.60 GHz.

Settings Recommendations

Based on the measured FPS rows, the optimal balance between visual quality and performance is the Medium preset. At 1920x1080 Medium, the average FPS is 96, with a minimum of 81 and a maximum of 110. This provides a comfortable margin above the 60 FPS standard, ensuring smooth gameplay even in demanding scenes. The jump to High reduces the average to 89 FPS, which is still acceptable, but the minimum FPS data is not provided for High, making Medium the safer choice for consistent frame pacing.

At 2560x1440, the Medium preset yields an average of 85 FPS, with a minimum of 73 and a maximum of 98. This is a strong result for a mobile GPU and suggests that 1440p gaming is viable without significant compromises. High settings at 1440p drop to 79 FPS average, which is still playable, but the Medium preset’s higher minimum frame rate (73 vs. no data for High) indicates better stability. For 4K, the data shows that Medium is the highest playable setting, with an average of 73 FPS and a minimum of 62. Low settings at 4K produce 116 FPS, which is excellent for competitive play, but Medium offers a better visual experience while staying above the 60 FPS threshold.

The Ultra preset is not recommended for any resolution if frame rate consistency is a priority. At 1080p Ultra, the average is 74 FPS, which is acceptable, but at 1440p it drops to 66 FPS, and at 4K it falls to 56 FPS. The lack of minimum FPS data for Ultra makes it a riskier choice, as the average alone does not guarantee smooth performance. The data suggests that Medium is the “sweet spot” for this combo, providing a balanced experience across all three resolutions, with the caveat that 4K Ultra is not within reach.

CPU Role

The Intel Core Ultra 5 135H is a 14-core, 18-thread processor based on the Meteor Lake architecture, manufactured on Intel’s 7 nm process. Its base clock of 3.60 GHz and boost clock of 4.60 GHz are complemented by a 18 MB shared L3 cache and 2 MB per-core L2 cache. The CPU’s average benchmark score of 29,093 places it in the 81st percentile, showing that it is a capable mobile processor. In synthetic tests, it nearly matches the AMD Ryzen 7 5800X, which scores 29,123, a delta of only -0.1%.

In Overpower, the CPU’s role is to feed the GPU with draw calls and physics calculations. The measured FPS data shows that at 1080p Low, the system achieves 153 FPS, which is a high number that indicates the CPU is not a limiting factor at lower settings. The CPU’s Cinebench R23 multi-core score of 11,875.5 and single-core score of 1,700 suggest strong per-thread performance, which is crucial for game logic. The PassMark single-thread score of 3,521 further confirms that the CPU can handle the primary game thread efficiently.

However, the combo rank of 2,005 out of 3,713 suggests that the CPU’s power is not fully utilized in this title. The 81st percentile CPU rank compared to the 73rd percentile GPU rank implies that the CPU has more headroom than the GPU. At 4K Ultra, the average FPS is 56, which is a 64% drop from 1080p Low (153 FPS). This drop is almost entirely attributable to the GPU’s inability to render at higher resolutions, not the CPU. The data indicates that upgrading the GPU would yield a greater performance increase than upgrading the CPU, as the Core Ultra 5 135H is already performing at a level comparable to desktop processors from a previous generation.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system’s performance across three resolutions and four settings presets. At 1920x1080, the Low preset delivers an average of 153 FPS, the highest recorded value. Medium settings yield an average of 96 FPS, with a minimum of 81 and a maximum of 110. High settings produce an average of 89 FPS, while Ultra drops to 74 FPS. The spread from Low to Ultra is 79 FPS, showing a wide range of performance headroom.

Moving to 2560x1440, the Low preset averages 137 FPS, which is still very high. Medium settings average 85 FPS, with a minimum of 73 and a maximum of 98. High settings average 79 FPS, and Ultra averages 66 FPS. The drop from 1080p to 1440p is noticeable but not severe, with the Low preset losing 16 FPS and the Ultra preset losing 8 FPS. This indicates that the GPU can handle the resolution increase reasonably well at lower settings.

At 3840x2160, the performance takes a more significant hit. Low settings average 116 FPS, which is still playable. Medium settings average 73 FPS, with a minimum of 62 and a maximum of 84. High settings average 67 FPS, and Ultra averages 56 FPS. The minimum FPS of 62 at 4K Medium is the lowest recorded minimum, indicating potential frame drops in intense scenes. The data shows a clear hierarchy: the system is capable of 1080p Ultra and 1440p High, but for 4K, users must stick to Medium or Low to maintain smooth gameplay.

The Medium preset is the only one with complete min/max data across all resolutions, making it the most reliable for analysis. At 1080p, the average of 96 FPS with an 81 FPS minimum ensures a consistent experience. At 1440p, the average of 85 FPS with a 73 FPS minimum is similarly robust. At 4K, the average of 73 FPS with a 62 FPS minimum is borderline but acceptable for less demanding players. The Ultra preset lacks min/max data, which makes its averages of 74, 66, and 56 FPS harder to trust for consistency, reinforcing the recommendation for Medium as the best overall choice.