Overpower

The Intel Core i9-14900K and NVIDIA GeForce RTX 5080 combination delivers exceptional performance in Overpower, positioning it as a top-tier pairing for high-refresh-rate gaming. The data shows a system that is heavily GPU-limited at higher resolutions but still provides playable frame rates even at 4K Ultra settings. This analysis breaks down the measured FPS across resolutions and settings to help you determine the optimal configuration for your display and performance goals.

Resolution Scaling

The measured FPS data reveals a clear and predictable pattern of performance scaling as resolution increases from 1920x1080 to 3840x2160. At 1080p with Low settings, the combo achieves an average of 280 FPS. Moving to 1440p Low drops this to 250 FPS, a reduction of 30 FPS or approximately 10.7%. The jump to 4K Low yields 213 FPS, which is another 37 FPS lower, or roughly 14.8% less than the 1440p result. This scaling indicates that even at lower settings, the GPU is beginning to become the limiting factor as pixel count rises.

The trend becomes more pronounced at higher settings, which suggests the GPU workload is scaling directly with resolution. At Medium settings, the average FPS goes from 175 at 1080p to 156 at 1440p, then down to 133 at 4K. The drop from 1080p to 1440p is 19 FPS (10.9%), while the drop from 1440p to 4K is 23 FPS (14.7%). For High settings, the figures are 163 FPS at 1080p, 145 FPS at 1440p, and 123 FPS at 4K. This represents a consistent decline, with the 4K result being 24.5% lower than the 1080p result, showing that the RTX 5080 is working progressively harder to fill the additional pixels.

Ultra settings show the most dramatic scaling. The average FPS drops from 135 at 1080p to 120 at 1440p, and then to 102 at 4K. The gap between 1080p and 4K at Ultra is 33 FPS, or 24.4%. This pattern strongly indicates that the NVIDIA GeForce RTX 5080 is the primary bottleneck at 4K, especially when visual quality is maximized. The Intel Core i9-14900K, with its high multi-core score of 39399.5 in Cinebench R23, is clearly not the limiting component in these scenarios, as the frame rate drops are almost entirely attributable to the increased rendering load on the GPU.

Settings Recommendations

For users with a 1920x1080 display, the data shows that the Low preset provides an average of 280 FPS, which is more than sufficient for competitive play. However, the Medium preset at 175 FPS is the sweet spot for balancing visual quality and performance, as it offers a substantial improvement in fidelity while still maintaining a high frame rate that exceeds the refresh rate of most 1080p monitors. The High preset at 163 FPS is also viable, but the Ultra setting at 135 FPS may be preferable for those who prioritize image quality over raw speed.

At 2560x1440, the Medium preset delivers an average of 156 FPS, which is an excellent result for high-refresh-rate 1440p panels (144Hz or 165Hz). The High preset at 145 FPS is nearly as good and provides better visuals, making it the recommended choice for most users on this resolution. The Ultra preset at 120 FPS is still very playable and offers the best visual experience, but the slight dip below the 144Hz threshold might be noticeable to sensitive users. The Low preset at 250 FPS is overkill for most displays and does not provide a meaningful competitive advantage at this resolution.

For 3840x2160, the RTX 5080 continues to deliver strong performance. The High preset at 123 FPS is ideal for 4K gaming on a 120Hz display, as it perfectly aligns with that refresh rate. The Medium preset at 133 FPS provides a small buffer and is also an excellent choice. The Ultra preset still manages an average of 102 FPS, which is playable but may require a VRR display to smooth out frame time variances. The Low preset at 213 FPS is not recommended for 4K, as the graphical sacrifices are too significant relative to the performance gain over High or Medium settings.

How This Combo Ranks

In the comprehensive database of tested CPU and GPU combinations for Overpower, this pairing of the Intel Core i9-14900K and NVIDIA GeForce RTX 5080 achieves a combo rank of 162 out of 3713 tested configurations. This places it in the top 4.4% of all tested combos, which is an outstanding result given the sheer number of possible pairings. The data indicates that this system is among the elite performers for this specific game.

This high ranking is consistent with the individual component performance. The CPU holds a percentile of 95 among all tested processors, while the GPU sits at the 87th percentile among all tested graphics cards. The combination of a top-tier CPU and a high-end GPU results in a system that is well-balanced for Overpower, avoiding significant bottlenecks at most settings. The rank of 162 suggests that there are 161 other combos that perform better, which likely include higher-end GPUs such as the RTX 5090 or possibly more optimized pairings, but this combo is still firmly in the upper echelon of performance.

The nearest rival data for the individual components provides context. The CPU's average benchmark score of 79097 is only 0.3% lower than the Intel Core i9-14900KF, which is a statistically insignificant difference. Similarly, the GPU's average score of 56083 is only 0.6% higher than the AMD Radeon 8060S, indicating that the RTX 5080 is closely matched with that competitor in synthetic benchmarks. However, the in-game FPS data for this specific combo demonstrates that the system is well-optimized and delivers a high level of real-world performance.

Measured FPS Breakdown

At 1920x1080, the measured averages are 280 FPS on Low, 175 FPS on Medium, 163 FPS on High, and 135 FPS on Ultra. The Medium setting also provides a minimum FPS of 149 and a maximum of 202, indicating good frame pacing. The progression from Low to Ultra shows a 51.8% decrease in performance, which is a significant trade-off for the highest visual fidelity.

At 2560x1440, the averages are 250 FPS on Low, 156 FPS on Medium, 145 FPS on High, and 120 FPS on Ultra. The Medium preset here shows a minimum of 133 FPS and a maximum of 180 FPS, suggesting that even during intense scenes, the frame rate stays well above the 100 FPS mark. The difference between Low and Ultra is 130 FPS, or 52%, which is similar to the scaling seen at 1080p.

At 3840x2160, the averages are 213 FPS on Low, 133 FPS on Medium, 123 FPS on High, and 102 FPS on Ultra. The Medium setting at 4K exhibits a minimum of 113 FPS and a maximum of 153 FPS, which is a tighter range than at lower resolutions, indicating that the GPU is consistently under heavy load. The drop from Low to Ultra is 111 FPS, representing a 52.1% reduction in performance.

GPU Role

The NVIDIA GeForce RTX 5080 plays a crucial role in this combo's performance, particularly at higher resolutions. With 16 GB of GDDR7 memory on a 256-bit bus, it offers a memory bandwidth of 960.0 GB/s. This is a substantial amount of bandwidth that is well-suited for the high-resolution textures and effects present in Overpower. The data shows that the GPU is the primary limiting factor at 4K Ultra, where the average FPS drops to 102, indicating that the rendering workload is saturating the GPU's capabilities.

The GPU's clock speeds are also relevant to its performance. With a base clock of 2295 MHz and a boost clock of 2617 MHz, the RTX 5080 is able to sustain high frequencies under load. The memory clock is listed at 1875 MHz, which translates to an effective speed of 30 Gbps. These clocks, combined with the 10752 shading units and 112 ROPs, allow the card to process the complex geometry and pixel shading required by Overpower efficiently.

The GPU's compute capabilities, including a FP32 performance of 56.28 TFLOPS, are more than sufficient for this game. The data suggests that the card is not bottlenecked by raw compute power, but rather by the sheer number of pixels it must render at 4K. The 16 GB of VRAM is also a critical factor, as it ensures that the card does not run out of memory when loading high-resolution textures, which could otherwise cause severe frame drops. The RTX 5080's performance in synthetic benchmarks, such as a 3DMark Steel Nomad DX12 score of 8637, corroborates its strong gaming performance.

FAQ

Q: What is the best resolution for this combo to achieve over 144 FPS?

A: The data shows that at 2560x1440 with Medium settings, the combo achieves an average of 156 FPS, which is above the 144 FPS threshold. At 1920x1080, it exceeds 144 FPS even on Ultra settings with an average of 135 FPS, but for a consistent 144+ FPS experience, 1080p Medium or 1440p Medium are the recommended choices.

Q: Is the RTX 5080 the bottleneck at 4K Ultra settings?

A: Yes, the benchmark results indicate that the GPU is the limiting component at 3840x2160. The average FPS at 4K Ultra is 102, which is a significant drop from the 135 FPS at 1080p Ultra. This scaling pattern is characteristic of a GPU-bound scenario, where the processor has enough headroom to feed the GPU, but the graphics card cannot render frames any faster.

Q: How much performance is lost when going from 1080p to 4K at High settings?

A: The measured data shows an average of 163 FPS at 1920x1080 High and 123 FPS at 3840x2160 High. This represents a decrease of 40 FPS, which is a 24.5% reduction in performance. This is a substantial drop, but the resulting 123 FPS at 4K is still highly playable.

Q: Does the i9-14900K hold back the RTX 5080 in this game?

A: The data does not suggest that the CPU is a limiting factor. The frame rates scale consistently with resolution, which is a sign of GPU limitation. The CPU's high multi-core score of 39399.5 in Cinebench R23 indicates it has ample headroom. At 1080p Low, the combo achieves 280 FPS, which is a very high number and suggests the CPU is capable of feeding even the most demanding GPU scenarios.

Q: What is the frame time consistency like at 1440p Medium?

A: The data for 2560x1440 Medium shows an average FPS of 156, with a minimum of 133 FPS and a maximum of 180 FPS. This range of 47 FPS indicates good frame pacing, with the minimum staying well above the 100 FPS mark, ensuring a smooth experience without major stutters.

Q: How does this combo perform compared to other tested configurations?

A: This specific combo ranks 162nd out of 3713 tested combinations for Overpower. This places it in the top 4.4% of all tested systems, indicating that it is a very high-performing pairing. The GPU's average benchmark score is 0.6% higher than the AMD Radeon 8060S, while the CPU's score is 0.3% lower than the Intel Core i9-14900KF, showing that it is closely matched with other top-tier components.