Overpower

The Intel Core i5-13400F and AMD Radeon RX 6800 XT combination in Overpower delivers a high-refresh-rate experience that scales predictably with resolution and settings. The data places this pairing in the 65th percentile of tested configurations, ranking 602nd out of 1744 combos, which indicates a well-balanced system for this action title. The benchmark results show that the GPU becomes the primary performance driver at higher resolutions, while the CPU’s 10-core, 16-thread design provides enough headroom to maintain solid frame rates even at 1080p.

CPU Role

The Intel Core i5-13400F brings a hybrid architecture to Overpower, with 10 cores and 16 threads running at a base clock of 2.50 GHz and a boost clock of 4.60 GHz. This Raptor Lake-S part, built on Intel’s 10 nm process, offers a 20 MB shared L3 cache and an 80 KB L1 cache per core. In synthetic benchmarks, the CPU achieves a 3dmark_max_threads score of 7307 and a single-thread score of 960, demonstrating that its multi-threaded capabilities are substantially stronger than its single-core performance—a trait that matters in a game that can utilize multiple cores for physics and AI calculations.

The processor’s overall performance is strong relative to its peers, sitting at the 82nd percentile of all CPUs with an average benchmark score of 25236. Its nearest rival, the Intel Core i7-13620H, posts an almost identical average score of 25201, a mere 0.1% difference, while the AMD Ryzen 5 5600X3D comes in slightly ahead at 25365 with a -0.5% delta. This indicates that the i5-13400F is firmly in the upper-middle tier of desktop processors, providing sufficient computational power to avoid bottlenecking the GPU in Overpower at most settings.

At 1080p with Low settings, the combo achieves 195 FPS average, which is the highest measured frame rate across all tested configurations. This suggests that the CPU is capable of feeding the GPU with enough data to reach very high frame rates when graphical demands are minimized. However, the gap between Low and High settings at 1080p—195 FPS versus 113.2 FPS—shows that the GPU is already contributing significantly to performance even at this resolution, and the CPU is not a limiting factor in the strictest sense.

GPU Role

The AMD Radeon RX 6800 XT is the dominant component in this pairing, equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing 512.0 GB/s of bandwidth. Its RDNA 2.0 architecture, built on TSMC’s 7 nm process, includes 4608 shading units, 288 TMUs, and 128 ROPs, with a boost clock of 2250 MHz and a game clock of 2015 MHz. The GPU’s FP32 performance is rated at 20.74 TFLOPS, which translates into substantial rasterization power for a title like Overpower.

In the broader GPU landscape, the RX 6800 XT holds an 87th percentile ranking with an average benchmark score of 49982. Its nearest rivals include the Intel Arc A550M at 49737 (0.5% delta), the NVIDIA CMP 50HX at 49071 (1.9% delta), and the NVIDIA GeForce RTX 4070 Ti SUPER at 48704 (2.6% delta). Interestingly, the RX 6800 XT outperforms the RTX 4070 Ti SUPER in this average score metric, despite the latter being a newer generation part, which underscores the AMD card’s raw compute strength.

The GPU’s impact on Overpower is most visible in the resolution scaling. At 4K with Ultra settings, the combo drops to 71.9 FPS average, while at 1080p with the same settings it climbs to 91.9 FPS. This 20 FPS difference between 1080p and 4K at Ultra settings (a 21.8% reduction) is relatively modest compared to the Low settings delta, where 4K yields 148.5 FPS versus 195 FPS at 1080p—a 23.8% drop. The data suggests that the GPU’s 16 GB VRAM and 512 GB/s bandwidth are sufficient to handle the game’s textures and geometry even at 4K, but the compute load still causes frame rates to fall as resolution increases.

FAQ

*Q: How does this CPU/GPU combo rank against other tested combinations in Overpower?*

A: The combination ranks 602nd out of 1744 tested combos, placing it in the top 35% of all configurations measured for this game.

*Q: What is the highest average FPS this combo achieves in Overpower?*

A: The highest measured average FPS is 195, achieved at 1920x1080 resolution with Low settings.

Q: Does the GPU or CPU limit performance more at 4K resolution?

A: At 4K, the GPU becomes the primary limiter. The average FPS drops from 195 at 1080p Low to 148.5 at 4K Low, a reduction of 46.5 FPS, indicating the GPU’s rendering workload scales heavily with resolution.

Q: How much faster is the i5-13400F compared to its nearest rival in synthetic benchmarks?

A: The i5-13400F scores 25236 on average, which is 0.1% faster than the Intel Core i7-13620H (25201) but 0.5% slower than the AMD Ryzen 5 5600X3D (25365).

Q: Is the RX 6800 XT more powerful than the NVIDIA RTX 4070 Ti SUPER based on benchmark scores?

A: Yes, the RX 6800 XT has an average benchmark score of 49982, which is 2.6% higher than the RTX 4070 Ti SUPER’s score of 48704.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings produce 175.4 FPS average, while Ultra settings yield 84 FPS average, a difference of 91.4 FPS.

Settings Recommendations

For the best experience in Overpower, the High preset presents the most balanced choice across all resolutions. At 1080p, High settings deliver 113.2 FPS average, which is comfortably above 60 FPS and close to 120 FPS for smoother motion. Moving to 1440p, High settings still hold 101.4 FPS average, and even at 4K, the combo maintains 85.9 FPS average—all figures that remain playable without sacrificing much visual quality.

Ultra settings are the most demanding, with frame rates falling to 91.9 FPS at 1080p, 84 FPS at 1440p, and 71.9 FPS at 4K. While these numbers are still above 60 FPS, the performance cost of Ultra over High is significant: at 1080p, the drop from High to Ultra is 21.3 FPS (18.8% reduction), and at 4K it is 14 FPS (16.3% reduction). The visual uplift from High to Ultra may not justify this frame rate loss in a fast-paced action game.

Low settings offer the highest frame rates but represent a substantial compromise in visual fidelity. The jump from Low to Medium at 1080p is 70.9 FPS (from 195 to 124.1), indicating that Low settings are likely reducing rendering resolution or disabling key effects, making them unsuitable for most players. Medium settings provide a middle ground with 124.1 FPS at 1080p and 110 FPS at 1440p, but High settings offer a better balance of image quality and performance, making them the recommended preset for this combo.

How This Combo Ranks

The Intel Core i5-13400F and AMD Radeon RX 6800 XT pairing achieves a rank of 602 out of 1744 tested combinations in Overpower, placing it in the 65.5th percentile of all configurations. This rank reflects the system’s ability to deliver high frame rates across a variety of settings and resolutions, though it does not crack the top tier of ultra-high-end builds. The CPU’s 82nd percentile standing and the GPU’s 87th percentile ranking suggest that both components are well above average, but the combo’s overall rank is slightly dragged down by the CPU’s relatively lower position compared to the GPU.

Given that the GPU outperforms its nearest rival, the RTX 4070 Ti SUPER, by 2.6% in average benchmark scores, the RX 6800 XT is clearly the stronger half of this pairing. The CPU, while competitive with the i7-13620H, does not offer the same level of headroom as higher-end desktop parts. This creates a slight imbalance where the GPU is capable of exceeding the CPU’s ability to feed it at very high frame rates, but in Overpower, the measured results show that this is not a significant bottleneck—even at 1080p Low, the combo reaches 195 FPS, which is likely near the game’s engine limits.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance across all settings. Low settings produce an average of 195 FPS, Medium drops to 124.1 FPS, High reaches 113.2 FPS, and Ultra falls to 91.9 FPS. The delta between Low and Medium is the largest at 70.9 FPS, while the difference between Medium and High is only 10.9 FPS, and between High and Ultra it is 21.3 FPS.

At 2560x1440, frame rates scale down uniformly. Low settings yield 175.4 FPS average, Medium achieves 110 FPS, High hits 101.4 FPS, and Ultra bottoms out at 84 FPS. The gap between Low and Medium here is 65.4 FPS, while Medium to High is 8.6 FPS, and High to Ultra is 17.4 FPS. These reductions are consistent with the GPU working harder at higher resolutions.

At 3840x2160, the GPU is pushed further. Low settings still produce a playable 148.5 FPS average, Medium drops to 92.7 FPS, High reaches 85.9 FPS, and Ultra falls to 71.9 FPS. The differences are more compressed at 4K, with Low to Medium showing a 55.8 FPS gap, Medium to High only 6.8 FPS, and High to Ultra 14 FPS. This compression suggests that the GPU is approaching its limits at 4K, where even lowering settings from High to Medium yields only a marginal gain.

Resolution Scaling

The FPS drop from 1080p to 4K reveals the limiting component in this system. At Low settings, the transition from 1080p (195 FPS) to 1440p (175.4 FPS) represents a 10.1% reduction, and from 1440p to 4K (148.5 FPS) another 15.3% drop. This indicates that the GPU is the primary constraint, as the CPU can still push frame rates above 148 FPS even at 4K with minimal graphical load.

At Ultra settings, the scaling is less steep but still present: 1080p yields 91.9 FPS, 1440p gives 84 FPS (an 8.6% drop), and 4K produces 71.9 FPS (a 14.4% drop from 1440p). The fact that Ultra settings show a smaller relative drop from 1080p to 4K than Low settings (21.8% versus 23.8%) suggests that both components are being taxed, but the GPU remains the dominant factor.

The pattern holds across all settings: the frame rate reduction from 1080p to 4K is roughly 20-25%, which is less than the 50% reduction that would occur if the GPU were purely resolution-bound. This indicates that the CPU is still contributing to performance, and the combined system is well-balanced for Overpower. However, the data shows that if a player wants to prioritize frame rate over visual fidelity, dropping to Low settings at 4K provides 148.5 FPS, which is 76.6 FPS higher than Ultra settings at the same resolution—a clear sign that the GPU’s compute load, not memory bandwidth, is the limiting factor at higher resolutions.