Overpower

The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 2060 SUPER delivers a playable, though not flawless, experience in Overpower. The data shows a clear pattern: this combination is firmly GPU-limited at higher resolutions, while the CPU provides ample headroom at 1080p. The benchmark results indicate that users must make deliberate choices about settings and resolution to hit their target frame rates, as the gap between Low and Ultra presets is substantial.

Resolution Scaling

The measured frame rates reveal how the RTX 2060 SUPER becomes the primary bottleneck as resolution increases. At 1080p, the combo achieves an average of 131.6 FPS on Low settings, which drops to 75.9 FPS on High and 61.7 FPS on Ultra. Moving to 1440p, those figures fall to 114.3 FPS on Low, 66.4 FPS on High, and 54.6 FPS on Ultra. At 4K, the strain is evident: Low settings yield 98.6 FPS, but High drops to 55.3 FPS, and Ultra falls to 47.5 FPS.

The scaling from 1080p to 4K on Low settings shows a 25% reduction in frame rate (131.6 to 98.6), which is modest compared to the drop on Ultra settings. The Ultra preset loses 23% of its performance from 1080p to 4K (61.7 to 47.5). This pattern suggests that while the GPU is the limiting factor, the CPU's 10 cores and 16 threads are sufficient to feed the graphics card even at lower resolutions. The fact that 4K Low (98.6 FPS) outperforms 1080p Ultra (61.7 FPS) by 60% indicates that resolution scaling is less punishing than the settings overhead, a classic sign of a GPU that runs out of shading and texture throughput before memory bandwidth becomes the issue.

Interestingly, the gap between Medium and High settings is small at each resolution. At 1440p, the difference is only 3 FPS (69.4 vs 66.4), while at 1080p it is 3.8 FPS (79.7 vs 75.9). This suggests that the High preset adds visual features that are not heavily taxing on the RTX 2060 SUPER's 2176 shading units and 136 texture mapping units. The real performance cliff appears when moving from High to Ultra, where the 8 GB GDDR6 memory and 448.0 GB/s bandwidth are pushed harder.

FAQ

*Q: Can this combo handle 4K gaming in Overpower?*

A: Yes, but only at Low settings, where it averages 98.6 FPS. Medium drops to 63.5 FPS, High to 55.3 FPS, and Ultra falls below 48 FPS at 47.5 FPS. For a smooth 60 FPS experience at 4K, Low is the only viable preset.

Q: How does the RTX 2060 SUPER compare to its nearest rivals in this game?

A: The GPU's average benchmark score is 19774, placing it 0.3% ahead of the NVIDIA GeForce GTX TITAN and 0.5% ahead of the RTX 2070. It also leads the Quadro K5200 by 0.8% and the Tesla K40m by 1.3%. These are marginal differences, so performance in Overpower will be nearly identical across these cards.

Q: Is the Core i5-12600KF a bottleneck at 1080p?

A: The data does not indicate a CPU bottleneck. At 1080p Low, the combo reaches 131.6 FPS, which is high enough to suggest the GPU is still the limiting factor. The CPU's 3DMark 16-thread score of 7956 and multi-core Geekbench score of 12373 provide sufficient headroom.

Q: What is the best settings preset for a 1440p monitor?

A: For 1440p, Medium offers 69.4 FPS and High offers 66.4 FPS, both playable. Ultra drops to 54.6 FPS. If you prioritize frame rate, Low at 114.3 FPS is the clear choice, but Medium provides a balanced experience.

Q: How does the CPU's single-thread performance affect the game?

A: The i5-12600KF scores 1016 in 3DMark single-thread and 3925 in PassMark single-thread. These scores indicate strong per-core performance that helps maintain minimum frame rates, though the measured data only provides averages without min FPS values.

Q: Does the combo rank well among all tested configurations?

A: The combo ranks 1275 out of 1744 tested combinations. This places it in the lower 27% of all combos, reflecting the GPU's mid-range standing (63rd percentile) rather than the CPU's stronger position (84th percentile).

CPU Role

The Intel Core i5-12600KF contributes significantly to this combo's performance, though its role varies by resolution. With 10 cores and 16 threads, the CPU provides ample parallelism for Overpower's action-game workload. Its base clock of 3.70 GHz and boost clock of 4.90 GHz ensure responsive single-thread performance, which is critical for game logic and physics. The 20 MB of shared L3 cache helps keep frequently accessed data close to the cores.

Benchmark results support the CPU's capability. The 3DMark 8-thread score of 6128 and max-thread score of 7952 show strong scaling, while the single-thread score of 1016 demonstrates that the architecture handles lightly threaded tasks well. The Cinebench R23 multi-core score of 23444 confirms that the chip can sustain high throughput over extended periods, which matters for games that use background simulation threads. The PassMark multi-thread score of 27575 further validates this.

Compared to its nearest rivals, the CPU is essentially tied with the Intel Core i9-10900K (0% delta) and the i5-12600K (-0.1% delta). It is 0.2% behind the Core Ultra 5 125H and 0.4% ahead of the Core i7-13700H. These differences are negligible in gaming terms. The CPU's 84th percentile ranking among all CPUs means it sits well above the GPU's 63rd percentile, confirming that the graphics card is the limiting component in most scenarios. However, at 1080p Low, the CPU's role becomes more prominent as the GPU works less, and the 131.6 FPS result indicates the i5-12600KF can keep up with the RTX 2060 SUPER's output.

How This Combo Ranks

The combo ranks 1275 out of 1744 tested combinations, placing it in the bottom 27% of all systems. This ranking reflects the RTX 2060 SUPER's position in the GPU hierarchy. The GPU's average benchmark score of 19774 puts it just 0.3% ahead of the GTX TITAN and 0.5% ahead of the RTX 2070, which are older or similarly positioned cards. The CPU's strong 84th percentile ranking does not boost the combo further because the game's frame rates are predominantly GPU-bound.

The data shows that this ranking is consistent with the measured FPS. At 1080p Ultra, the combo achieves 61.7 FPS, which is playable but not exceptional. At 4K Ultra, the 47.5 FPS result is below the 60 FPS threshold that many players target. The combo's rank of 1275 suggests that while it can run Overpower, it does so with compromises. Systems with higher-ranked GPUs would likely achieve higher frame rates at the same settings, while the CPU's contribution is sufficient to avoid dragging down performance in most cases.

The 1744 total combos include a wide range of hardware, so being in the 73rd percentile of all tested systems means this setup is mid-pack. It outperforms lower-tier GPUs but falls behind configurations with more powerful graphics cards. The CPU's 84th percentile ranking indicates that upgrading the GPU would yield significant gains without requiring a CPU change, as the i5-12600KF has headroom to support a faster card.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce 131.6 FPS, which is ideal for high-refresh-rate monitors. Medium yields 79.7 FPS, High 75.9 FPS, and Ultra 61.7 FPS. The drop from Low to Medium is 39.5%, indicating that the Medium preset adds substantial visual complexity. From Medium to High, the difference is only 4.8%, while High to Ultra costs 18.7%.

At 2560x1440, performance scales down predictably. Low settings achieve 114.3 FPS, maintaining smooth gameplay. Medium drops to 69.4 FPS, and High to 66.4 FPS. Ultra falls to 54.6 FPS, which is below the 60 FPS target for many users. The gap between Medium and High narrows to 4.3%, while the jump from High to Ultra costs 18%.

At 3840x2160, the GPU is heavily taxed. Low settings still deliver 98.6 FPS, a surprisingly playable result. Medium drops to 63.5 FPS, and High to 55.3 FPS. Ultra bottoms out at 47.5 FPS, making it the only preset that dips below 48 FPS across all resolutions. The data shows a consistent pattern: Low settings provide at least 98.6 FPS at any resolution, while Ultra never exceeds 61.7 FPS even at 1080p.

The difference between 1080p and 1440p on Low settings is 13.2% (131.6 vs 114.3), while the difference between 1440p and 4K on Low is 13.7% (114.3 vs 98.6). This linear scaling suggests that the GPU's memory bandwidth of 448.0 GB/s and 8 GB capacity are sufficient for Low settings across all resolutions. For Ultra settings, the scaling is steeper: 1080p to 1440p costs 11.5%, and 1440p to 4K costs 13.0%.

Settings Recommendations

For a 1080p monitor, the best experience depends on the refresh rate. If the display runs at 120 Hz or higher, Low settings at 131.6 FPS are the only way to fully utilize it. For a standard 60 Hz display, Medium at 79.7 FPS offers a smooth experience with better visuals than Low. High at 75.9 FPS is nearly identical to Medium in performance, so the choice between them comes down to personal preference for specific visual features. Ultra at 61.7 FPS is playable but leaves little headroom for drops.

At 1440p, Medium is the recommended preset. It delivers 69.4 FPS, which is above the 60 FPS threshold, while High offers 66.4 FPS with a marginal visual improvement. Low at 114.3 FPS is ideal for competitive play or high-refresh displays, but it sacrifices significant visual quality. Ultra at 54.6 FPS is not recommended unless the user prioritizes image quality over smoothness and can tolerate occasional dips.

For 4K, Low settings at 98.6 FPS are the clear choice. Medium at 63.5 FPS is also viable for 60 Hz displays, but the jump to High at 55.3 FPS drops below the 60 FPS target. Ultra at 47.5 FPS should be avoided unless the user has a VRR display and accepts lower frame rates. The data suggests that the RTX 2060 SUPER is best utilized at 1080p or 1440p with Medium or High settings, while 4K requires Low settings to maintain playable performance.