Overpower

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5700X is an 8-core, 16-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates on the AMD Socket AM4 platform and is built on TSMC's 7 nm process node. The chip has a base clock of 3.40 GHz and a boost clock of 4.60 GHz, with a 65 W TDP. This is a desktop-class processor with a 32 MB shared L3 cache and 64 KB of L1 cache per core, alongside 512 KB of L2 cache per core. The CPU supports DDR4 memory in a dual-channel configuration, providing a memory bandwidth of 51.2 GB/s, and it includes ECC memory support. It also offers PCIe Gen 4 with 20 lanes from the CPU.

In synthetic benchmarks, the Ryzen 7 5700X delivers a strong multi-threaded showing. Its Cinebench R23 multicore score is 13184, while the single-core score is 1499. In Geekbench, it scores 10779 multicore and 2016 single-core. The 3DMark results show a progression from 1821 in the 2-thread test to 5768 in the 8-thread test, and 6858 in the 16-thread test, with a max-threads score of 6850. PassMark multithread score is 26612, with a single-thread score of 3385. The chip's average benchmark score is 27578, placing it in the 79th percentile of all CPUs.

Compared to its nearest rivals, the Ryzen 7 5700X is essentially matched with the Intel Core i5-12600K, which has an identical average score of 27578 (0% delta). It also sits within a razor-thin margin of the AMD Ryzen 7 5800 (27535, 0.2% faster) and the AMD Ryzen 5 7600X (27636, 0.2% slower). The Intel Core Ultra 5 125H is 0.3% behind at 27507. This places the 5700X in a very tight performance cluster where no single rival holds a meaningful advantage in aggregate CPU workloads.

For a game like Overpower, the CPU's 8 cores and 16 threads are more than sufficient to feed the GPU in most scenarios. The high single-thread score of 1499 in Cinebench R23 suggests strong per-core performance, which is critical for game logic and draw call handling. The data shows that at 1080p with Low settings, the system achieves 129 FPS average, which is the highest measured result across all settings and resolutions. This indicates that at lower graphical loads, the CPU can push frame rates well above 120 FPS without becoming a bottleneck. The 3DMark 16-thread score of 6858 confirms that the processor scales well with multi-threaded workloads, which is relevant for modern game engines that utilize multiple cores for physics, streaming, and AI tasks.

The 65 W TDP is modest for an 8-core part, indicating efficient power delivery. The fact that the 5700X holds its own against the i5-12600K in aggregate benchmarks, despite the Intel chip having a different core configuration, suggests that the Zen 3 architecture's IPC is competitive. For Overpower specifically, the CPU's capability is evident in the fact that even at 4K Ultra, the system does not drop below playable frame rates, implying that the processor is not the limiting factor in this title. The CPU's percentile rank of 79 out of all CPUs further reinforces that this is a high-performing processor for gaming workloads.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 2060 SUPER is built on the Turing architecture using the TU106 chip, fabricated on TSMC's 12 nm process. It has 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. The GPU's base clock is 1470 MHz, with a boost clock of 1650 MHz, and the memory runs at 1750 MHz (14 Gbps effective). The card features 2176 shading units, 136 texture mapping units, and 64 ROPs, along with 34 RT cores and 272 tensor cores. Its pixel rate is 105.6 GPixel/s and texture rate is 224.4 GTexel/s, with FP32 performance of 7.181 TFLOPS. The TDP is 175 W, and it requires a single 8-pin power connector with a suggested 450 W power supply.

In synthetic benchmarks, the RTX 2060 SUPER achieves a 3DMark Steel Nomad DX12 score of 2011. Its Geekbench scores are 76957 in OpenCL and 77402 in Vulkan. PassMark results show a G3D score of 16462, with DirectX 11 scoring 130 and DirectX 12 scoring 61. The GPU's average benchmark score is 18093, placing it in the 62nd percentile of all GPUs.

Against its nearest rivals, the RTX 2060 SUPER is closely matched with the NVIDIA GeForce RTX 3060 Mobile, which scores 18159 (0.4% higher). The AMD Radeon Pro 5700 is 0.5% ahead at 18189, while the AMD Radeon RX 460 is 1.5% faster at 18373, and the Intel Arc A770M is 1.6% ahead at 18383. These deltas are all within a couple of percentage points, indicating that the 2060 SUPER's performance tier is highly competitive with other mid-range options.

For Overpower, the GPU's 8 GB of VRAM is a key asset. At 4K Ultra settings, the game averages 47 FPS, which suggests the GPU is being pushed heavily at the highest resolution and quality settings. The 8 GB frame buffer is sufficient for 4K textures in this title, as the system does not exhibit catastrophic frame drops. The GPU's memory bandwidth of 448.0 GB/s is also crucial for high-resolution rendering, as texture streaming and frame buffer operations demand significant bandwidth.

The RTX 2060 SUPER's boost clock of 1650 MHz, combined with 7.181 TFLOPS of FP32 performance, provides the raw compute power needed to handle Overpower's action-oriented visuals. The presence of RT cores and tensor cores, while not directly benchmarked in this game, suggests that the GPU can handle additional graphical features if the game supports them. However, the measured data focuses on standard rasterization performance.

The GPU's percentile rank of 62 indicates that it is a solid mid-range card, but it is clearly the limiting component in this system at higher resolutions. The data shows that dropping from 4K Ultra (47 FPS) to 4K Low (98 FPS) more than doubles the frame rate, which is a classic sign of GPU-bound performance. The 8 GB VRAM is adequate for this game at all tested settings, as there is no evidence of texture pop-in or stuttering in the measured results.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data across resolutions reveals a clear pattern of GPU-bound performance in Overpower. At 1080p Low settings, the system achieves 129 FPS average. Moving to 1440p Low drops that to 115 FPS, a reduction of 14 FPS (approximately 10.9% decrease). Jumping to 4K Low yields 98 FPS, which is 31 FPS lower than 1080p Low (a 24% decrease). This scaling is relatively gentle, indicating that at Low settings, the GPU has enough headroom to handle the increased pixel count without severe penalties.

At Medium settings, the pattern is similar but with a steeper curve. 1080p Medium averages 81 FPS, 1440p Medium drops to 72 FPS (11.1% decrease), and 4K Medium falls to 61 FPS (24.7% decrease from 1080p). The Medium settings also provide minimum and maximum FPS data: at 1080p, the range is 69 to 93 FPS; at 1440p, it is 61 to 83 FPS; and at 4K, it is 52 to 70 FPS. These ranges show that the variance becomes tighter as resolution increases, with the gap between min and max FPS shrinking from 24 FPS at 1080p to 18 FPS at 4K. This suggests that at higher resolutions, the GPU is more consistently saturated, reducing the impact of CPU-induced frame time spikes.

High settings show a similar trend. 1080p High averages 75 FPS, 1440p High drops to 67 FPS (10.7% decrease), and 4K High falls to 57 FPS (24% decrease). The relative drops are consistent across Low, Medium, and High settings, with the 1080p-to-1440p transition costing roughly 10-11% performance and the 1440p-to-4K transition costing roughly 14-15% performance. This compounding effect indicates that the GPU's rendering load scales predictably with pixel count.

Ultra settings exhibit the most pronounced resolution scaling. 1080p Ultra averages 62 FPS, 1440p Ultra drops to 56 FPS (9.7% decrease), and 4K Ultra falls to 47 FPS (24.2% decrease from 1080p). At 4K Ultra, the system just barely maintains playable frame rates, sitting below the 60 FPS threshold. This is the only configuration where the system dips below 50 FPS, confirming that Ultra settings at 4K are pushing the RTX 2060 SUPER to its limits.

The data strongly indicates that the GPU is the primary limiting factor in this system, particularly at higher resolutions and settings. The CPU's performance is sufficient to feed the GPU, as evidenced by the fact that the FPS drops are proportional to pixel count increases, which is the hallmark of a GPU bottleneck. If the CPU were the limiting factor, the FPS would remain relatively flat across resolutions, especially at lower settings. Instead, the consistent 10-25% drops from 1080p to 4K across all settings point to the RTX 2060 SUPER being the constraint.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

1920x1080 (1080p):

• Low: 129 FPS average
• Medium: 81 FPS average (min 69, max 93)
• High: 75 FPS average
• Ultra: 62 FPS average

At 1080p, the system is clearly capable of high refresh rate gaming on Low settings, exceeding 120 FPS. Medium and High settings both stay comfortably above 60 FPS, while Ultra dips to 62 FPS, which is still playable but close to the 60 FPS threshold.

2560x1440 (1440p):

• Low: 115 FPS average
• Medium: 72 FPS average (min 61, max 83)
• High: 67 FPS average
• Ultra: 56 FPS average

At 1440p, Low settings maintain a smooth experience above 100 FPS. Medium and High both hover in the 67-72 FPS range, which is adequate for most gamers. Ultra falls below 60 FPS at 56 FPS, indicating that the highest quality preset is not ideal for 1440p gaming on this hardware.

3840x2160 (4K):

• Low: 98 FPS average
• Medium: 61 FPS average (min 52, max 70)
• High: 57 FPS average
• Ultra: 47 FPS average

At 4K, Low settings still deliver near-100 FPS, which is impressive for this GPU tier. Medium settings just barely hit 61 FPS, while High drops to 57 FPS and Ultra falls to 47 FPS. The 4K Medium configuration has a minimum FPS of 52, indicating that even the average can dip below 60 FPS during intense scenes.

The full dataset shows a consistent pattern: each step up in settings costs roughly 15-20 FPS at 1080p, 15-20 FPS at 1440p, and 10-15 FPS at 4K. The 4K resolution is the most demanding, with the gap between Low and Ultra being 51 FPS (98 vs 47). At 1080p, the gap between Low and Ultra is 67 FPS (129 vs 62), and at 1440p, it is 59 FPS (115 vs 56). This indicates that the GPU has more headroom at lower resolutions, allowing for larger setting swings, while at 4K, the performance ceiling compresses the differences.

FAQ

Q: What is the best resolution for playing Overpower with this hardware at High settings?

A: The data shows that at 1080p High, the system averages 75 FPS, which is comfortably above 60 FPS. At 1440p High, it drops to 67 FPS, still playable. At 4K High, it falls to 57 FPS, which is below 60 FPS. Therefore, 1440p High offers the best balance of visual quality and smoothness, while 1080p High is safer for consistent frame pacing.

Q: Can this system handle 4K gaming in Overpower?

A: Yes, but with limitations. At 4K Low, the system averages 98 FPS, which is excellent. At 4K Medium, it averages 61 FPS with a minimum of 52 FPS, which is borderline. At 4K Ultra, it drops to 47 FPS, which is not ideal for fast-paced action. The RTX 2060 SUPER can handle 4K, but only at lower settings for a consistently smooth experience.

Q: How does the CPU compare to its closest competitor in aggregate benchmarks?

A: The AMD Ryzen 7 5700X has an average benchmark score of 27578, which is identical to the Intel Core i5-12600K (0% delta). It is 0.2% slower than the AMD Ryzen 7 5800 (27535) and 0.2% faster than the AMD Ryzen 5 7600X (27636). The Intel Core Ultra 5 125H is 0.3% slower at 27507. In practical terms, these CPUs are interchangeable in performance.

Q: Is the GPU's VRAM sufficient for Overpower at 4K?

A: The RTX 2060 SUPER has 8 GB of GDDR6 memory. The measured data shows no signs of VRAM-related stuttering or texture issues at any resolution, including 4K Ultra (47 FPS average). The 8 GB frame buffer is sufficient for this game's textures, as the performance drops from 4K Medium to 4K Ultra (61 to 47 FPS) are consistent with increased GPU compute load, not memory capacity limitations.

Q: What is the best setting preset for a 60 FPS target at 1440p?

A: At 1440p, High settings average 67 FPS, which exceeds the 60 FPS target. Medium settings average 72 FPS with a minimum of 61 FPS, ensuring that even the lowest frame rate stays above 60 FPS. Ultra settings average 56 FPS, which falls short of 60 FPS. Therefore, Medium settings are the safest choice for a locked 60 FPS experience at 1440p.

Q: How does the GPU's performance rank among all GPUs?

A: The RTX 2060 SUPER is in the 62nd percentile of all GPUs, with an average benchmark score of 18093. It is closely matched with the RTX 3060 Mobile (18159, 0.4% faster), the Radeon Pro 5700 (18189, 0.5% faster), and the Radeon RX 460 (18373, 1.5% faster). This places it in the mid-range tier, capable of 1080p and 1440p gaming with ease.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and frame rate preference.

For 1080p gaming, the system has significant headroom. Low settings at 129 FPS are ideal for competitive play or high refresh rate monitors (144Hz+). Medium settings at 81 FPS provide a good balance of visual fidelity and smoothness, with a minimum of 69 FPS ensuring no drops below 60 FPS. High settings at 75 FPS are also excellent for a 75Hz or 120Hz display. Ultra settings at 62 FPS are playable but sit close to the 60 FPS threshold, so they are only recommended for gamers who prioritize visual quality over frame rate consistency.

For 1440p gaming, Medium settings are the recommended sweet spot. The 72 FPS average with a 61 FPS minimum guarantees a smooth experience without dipping below 60 FPS. High settings at 67 FPS are also viable, but the minimum is not recorded, so there is a slight risk of frame drops during intense scenes. Low settings at 115 FPS are excellent for high refresh rate 1440p monitors, though at the cost of visual quality. Ultra settings at 56 FPS are not recommended for action games, as the frame rate falls below the 60 FPS target.

For 4K gaming, the system is heavily GPU-bound. Low settings at 98 FPS are surprisingly playable and provide a smooth experience. Medium settings at 61 FPS with a minimum of 52 FPS are borderline; the average is just above 60 FPS, but the minimum suggests occasional stuttering. High settings at 57 FPS and Ultra at 47 FPS are both below the 60 FPS target and are not recommended for a game with fast-paced action. For 4K, the data clearly supports using Low settings to maintain high frame rates, or Medium if the player is willing to tolerate occasional dips below 60 FPS.

In summary, the best experience per the measured rows is 1080p Medium for a perfect 60 FPS lock, 1440p Medium for a balance of resolution and smoothness, and 4K Low for those who prioritize resolution over graphical detail. For players with high refresh rate monitors at 1080p, Low settings unlock the full potential of the display. The RTX 2060 SUPER is a capable mid-range card, and these recommendations align with its measured performance envelope in Overpower.