Overpower

The Intel Core i5-12600KF and NVIDIA GeForce RTX 3060 Ti combination delivers a balanced 1080p and 1440p experience in Overpower, with the data showing the CPU providing ample headroom while the GPU becomes the primary constraint at higher resolutions and settings. Benchmark results indicate a clear scaling pattern: the system transitions from CPU-friendly at low settings to firmly GPU-bound as visual fidelity increases, with the measured FPS breakdown offering a detailed look at where each component’s capabilities end.

CPU Role

The Intel Core i5-12600KF brings 10 cores and 16 threads to the table, operating at a base clock of 3.70 GHz and a boost clock of 4.90 GHz. This Alder Lake-S architecture, built on Intel’s 10 nm process, pairs a 20 MB shared L3 cache with per-core L1 and L2 caches of 80 KB and 1.25 MB respectively. For Overpower, an action title released in August 2023, this configuration proves more than sufficient. The CPU’s benchmark scores show strong multi-threaded performance: a Cinebench R23 multicore score of 23444 and a Geekbench multicore score of 12373 demonstrate its ability to handle the game’s background tasks. Single-thread performance, critical for game logic and physics, is also solid at 3309 in Cinebench R23 and 2529 in Geekbench.

The data reveals that the CPU is not the bottleneck in this pairing. At 1080p with Low settings, the system achieves 127.3 FPS, which is the highest recorded average across all tested configurations. This suggests the CPU can feed the GPU efficiently even at lower resolutions where frame rates are highest. The CPU’s percentile ranking of 84 places it well above the majority of tested processors, and its nearest rivals show negligible differences: the Intel Core i9-10900K matches its average score of 27827 exactly with a 0% delta, while the Core i5-12600K trails by just -0.1%. This consistency indicates that the i5-12600KF is not a limiting factor in Overpower’s performance envelope.

GPU Role

The NVIDIA GeForce RTX 3060 Ti, based on the GA104 chip and Ampere architecture, provides 8 GB of GDDR6 memory on a 256-bit bus, delivering a bandwidth of 448.0 GB/s. Its boost clock of 1665 MHz and base clock of 1410 MHz support a pixel rate of 133.2 GPixel/s and a texture rate of 253.1 GTexel/s, with FP32 performance rated at 16.20 TFLOPS. The GPU’s 4864 shading units and 152 texture mapping units handle Overpower’s visual load, while 38 ray tracing cores and 152 tensor cores offer additional capabilities. The GPU’s percentile ranking of 69 places it in the upper tier, though its nearest rivals paint a different picture: the AMD Radeon RX 6700M is 0.2% ahead, and the RX 6600 is 0.5% ahead, suggesting the RTX 3060 Ti sits at the edge of a competitive cluster.

The GPU becomes the dominant factor as settings increase. At 1080p Ultra, the average FPS drops to 61.8, a 51% reduction from the Low setting’s 127.3 FPS. This trend accelerates at 4K, where Ultra settings yield just 44.6 FPS compared to 98.3 FPS at Low. The GPU’s 8 GB VRAM, while adequate for 1080p and 1440p, shows strain at 4K Ultra, where the combination of resolution and high-quality textures pushes the memory subsystem. The Passmark G3D score of 20349 and 3DMark Steel Nomad DX12 score of 2626 provide context for the GPU’s overall capability, but Overpower’s specific demands highlight that the RTX 3060 Ti is best suited for 1080p and 1440p gaming rather than 4K.

Resolution Scaling

The measured FPS data reveals a consistent pattern of performance degradation as resolution increases, with the magnitude of the drop varying by settings. At Low settings, the system moves from 127.3 FPS at 1080p to 115.3 FPS at 1440p, a 9.4% reduction, and then to 98.3 FPS at 4K, a further 14.7% reduction. This relatively shallow curve indicates that at Low settings, the CPU and GPU are both contributing to keeping frame rates high, with neither component fully saturated.

At Ultra settings, the scaling becomes more pronounced. The system achieves 61.8 FPS at 1080p, drops to 55.9 FPS at 1440p (a 9.5% reduction), and then falls to 44.6 FPS at 4K (a 20.2% reduction from 1440p). The steeper decline at higher resolutions points to the GPU becoming the limiting component, as the increased pixel count demands more from the 8 GB VRAM and the 448.0 GB/s bandwidth. Medium settings follow a similar trajectory: 82.7 FPS at 1080p, 74.7 FPS at 1440p, and 62.5 FPS at 4K. High settings show 75.9 FPS at 1080p, 68.5 FPS at 1440p, and 55.1 FPS at 4K.

The data indicates that the transition from 1080p to 1440p is relatively mild across all settings, with reductions ranging from 9.4% to 10.9%. However, the jump from 1440p to 4K is more severe, especially at Ultra where the 20.2% drop contrasts with the 14.7% drop at Low. This suggests that 4K gaming is only viable at Low settings, where the 98.3 FPS average remains playable, while 1080p and 1440p offer more flexibility across the settings spectrum.

How This Combo Ranks

The combination of the Intel Core i5-12600KF and NVIDIA GeForce RTX 3060 Ti achieves a rank of 1245 out of 1744 tested combos in Overpower, placing it in the 71.4th percentile of all configurations. This ranking reflects the system’s balanced but not exceptional performance. The CPU’s strong showing—ranking in the 84th percentile—is offset by the GPU’s more modest 69th percentile standing, pulling the overall combo down relative to configurations with higher-end graphics cards.

The ranking data suggests that this combo competes well in the mid-range segment but falls short of top-tier setups. The GPU’s nearest rivals, which include the AMD Radeon RX 6700M and RX 6600 with deltas of -0.2% and -0.5% respectively, indicate that the RTX 3060 Ti is part of a tightly grouped performance tier. However, the combo’s overall rank of 1245 out of 1744 means that roughly 30% of tested configurations outperform it, likely those pairing higher-end GPUs with similar CPUs. For Overpower, the data shows that this combo is a reliable choice for 1080p and 1440p gaming, but it is not positioned to lead in 4K or ultra-high-refresh-rate scenarios.

FAQ

Q: What is the highest average FPS this combo achieves in Overpower?

A: The highest recorded average is 127.3 FPS at 1920x1080 resolution with Low settings.

Q: How does the CPU compare to its nearest rival in benchmarks?

A: The Intel Core i5-12600KF has an average benchmark score of 27827, exactly matching the Intel Core i9-10900K with a 0% delta, and it is 0.1% ahead of the Intel Core i5-12600K.

Q: Can this system handle 4K gaming in Overpower?

A: At 4K, the system achieves 98.3 FPS on Low settings, but drops to 55.1 FPS on High and 44.6 FPS on Ultra, indicating that 4K is only playable at lower settings.

Q: What is the GPU’s memory bandwidth?

A: The NVIDIA GeForce RTX 3060 Ti has a memory bandwidth of 448.0 GB/s, derived from 8 GB of GDDR6 memory on a 256-bit bus.

Q: How does the combo’s rank in Overpower compare to all tested configurations?

A: The combo ranks 1245th out of 1744 tested combos, placing it in the mid-to-upper portion of the overall distribution.

Q: What is the FPS difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the system delivers 115.3 FPS on Low settings and 55.9 FPS on Ultra, a difference of 59.4 FPS.

Measured FPS Breakdown

The measured FPS data for Overpower provides a comprehensive view of the system’s performance across resolutions and settings. At 1920x1080, the system achieves 127.3 FPS on Low, 82.7 FPS on Medium, 75.9 FPS on High, and 61.8 FPS on Ultra. The spread from Low to Ultra is 65.5 FPS, with the largest single drop occurring between Low and Medium at 44.6 FPS.

At 2560x1440, the averages are 115.3 FPS on Low, 74.7 FPS on Medium, 68.5 FPS on High, and 55.9 FPS on Ultra. The reduction from 1080p is consistent: Low drops by 12.0 FPS, Medium by 8.0 FPS, High by 7.4 FPS, and Ultra by 5.9 FPS. This pattern shows that higher settings experience smaller absolute reductions when moving from 1080p to 1440p, as the GPU is already under more load.

At 3840x2160, the system delivers 98.3 FPS on Low, 62.5 FPS on Medium, 55.1 FPS on High, and 44.6 FPS on Ultra. The jump from 1440p to 4K is more significant: Low drops by 17.0 FPS, Medium by 12.2 FPS, High by 13.4 FPS, and Ultra by 11.3 FPS. The 4K Ultra result of 44.6 FPS is the lowest recorded average, falling below the 60 FPS threshold typically considered smooth gameplay. Conversely, the 4K Low result of 98.3 FPS shows that the system retains playability even at this resolution when settings are minimized. Across all resolutions, Low settings provide the highest frame rates, with 1080p Low offering the best overall performance at 127.3 FPS.