Overpower

Resolution Scaling

The measured FPS data for Overpower shows a clear and predictable resolution scaling pattern, but the magnitude of the drop between 1080p and 4K reveals important information about where the bottleneck lies. At the Ultra preset, the system delivers 102 FPS at 1920x1080, 91 FPS at 2560x1440, and 77 FPS at 3840x2160. This represents a 24.5% reduction in frame rate when moving from 1080p to 4K, which is a relatively modest decline for a 4x increase in pixel count. The data suggests that the NVIDIA GeForce RTX 4070 is not being fully saturated at lower resolutions, and the AMD Ryzen 9 9900X3D is doing substantial work to keep frame rates high.

The Low preset tells a similar story with a steeper absolute decline. At 1920x1080 Low, the system reaches 212 FPS, which drops to 189 FPS at 2560x1440 and 160 FPS at 3840x2160. The 52 FPS difference between the lowest and highest resolution at Low settings is significant, but the fact that 4K Low still exceeds 150 FPS indicates that the GPU has considerable headroom even at the highest pixel counts. The percentage drop from 1080p to 4K at Low settings is 24.5%, nearly identical to the Ultra preset's drop, which points to a consistent scaling behavior across settings.

The Medium preset provides the only complete min/max data in the measured results. At 1080p Medium, the average is 132 FPS with a minimum of 112 and maximum of 152. At 1440p Medium, the average drops to 118 FPS with a range of 100 to 135. At 4K Medium, the average falls to 100 FPS with a range of 85 to 115. The minimum frame rates track the averages closely, suggesting that frame pacing remains stable even as resolution increases. The spread between minimum and maximum FPS grows slightly at higher resolutions, from 40 FPS at 1080p to 30 FPS at 4K, but this is not a dramatic change.

The scaling pattern across all presets indicates that the RTX 4070 is the primary limiting component as resolution increases. The 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for Overpower's demands, as evidenced by the relatively smooth degradation in performance. The 24.5% average FPS drop from 1080p to 4K is smaller than what would be expected if the GPU were severely bandwidth-constrained, suggesting that the game's rendering engine scales well with the Ada Lovelace architecture's capabilities. The 192-bit memory bus and 158.4 GPixel/s pixel rate appear well-matched to the game's requirements.

Settings Recommendations

The measured FPS data reveals that the Ultra preset at 4K is the only configuration that falls below the 80 FPS threshold, achieving 77 FPS average. For players targeting a smooth 4K experience, the High preset at 93 FPS represents the best balance between visual quality and performance. The jump from High to Ultra at 4K costs 16 FPS, which is a 17.2% performance penalty for the additional visual fidelity that Ultra provides. Given that High already delivers nearly 100 FPS at 4K, this preset is the recommended choice for 4K displays.

At 2560x1440, the Ultra preset achieves 91 FPS average, which is comfortably playable and represents the maximum visual quality available in the game. The High preset at 1440p delivers 109 FPS, offering a 19.8% performance improvement over Ultra while sacrificing some visual detail. For players with high refresh rate 1440p monitors, the Medium preset at 118 FPS provides an excellent compromise, especially considering the minimum FPS of 100 ensures consistent frame delivery. The Low preset at 189 FPS is excessive for most displays and only recommended for competitive play where maximum frame rates are paramount.

At 1920x1080, all presets deliver playable frame rates, with even Ultra achieving 102 FPS average. The High preset at 123 FPS and Medium at 132 FPS both provide excellent experiences, but the Medium preset's minimum FPS of 112 offers the most consistent frame delivery. The Low preset at 212 FPS is the clear choice for esports-style play, though the visual sacrifice may not be worth it for most players. The data shows that the RTX 4070 and Ryzen 9 9900X3D combination can handle Overpower at maximum settings at 1080p, but the Medium preset provides the best stability with its documented 112-152 FPS range.

The performance gap between Medium and High is consistent across resolutions, averaging around 14 FPS. However, the gap between High and Ultra is larger, averaging around 16-17 FPS. This suggests that Ultra settings introduce rendering features that are disproportionately expensive on the RTX 4070. Players seeking the highest frame rates should stick with High, while those prioritizing visual fidelity at 1440p can safely use Ultra. The 4K Ultra configuration at 77 FPS is borderline for smooth gameplay, and the data suggests that High is the better choice for 4K displays.

GPU Role

The NVIDIA GeForce RTX 4070 plays a central role in Overpower's performance, with its 12 GB of GDDR6X memory proving adequate for all tested configurations. The memory operates at 1313 MHz with 21 Gbps effective speed, delivering 504.2 GB/s of bandwidth across a 192-bit bus. This bandwidth appears sufficient for the game's demands, as evidenced by the consistent scaling across resolutions. The 5 nm Ada Lovelace architecture, built on the AD104 chip with 35,800 million transistors, provides the computational foundation for the measured results.

The RTX 4070's clock speeds contribute significantly to the performance observed. The base clock of 1920 MHz and boost clock of 2475 MHz allow the GPU to maintain high utilization across all settings. The 5888 shading units operating at these clocks produce 29.15 TFLOPS of FP32 performance, which is more than adequate for Overpower's Action genre gameplay. The 46 RT cores and 184 tensor cores provide additional acceleration for any ray-traced or AI-enhanced features the game might employ, though the measured data does not isolate these effects.

The GPU's 200 W TDP and dual-slot design suggest that thermal management is not a limiting factor in sustained performance. The pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s are well-matched to the game's rendering requirements. The 64 ROPs ensure efficient pixel output, which is particularly important at 4K resolution where the 77 FPS Ultra result demonstrates the GPU's capabilities. The benchmark scores place the RTX 4070 in the 81st percentile among all GPUs, with an average benchmark score of 37648. Its nearest rival, the NVIDIA GeForce RTX 4080 Mobile, performs only 1.3% better, while the AMD Radeon RX Vega 56 is 0.4% slower.

The 12 GB memory capacity is never fully stressed in the measured scenarios, as the FPS scaling from 1080p to 4K remains steady without sudden drops that would indicate memory swapping. The 504.2 GB/s bandwidth is the more critical specification, and the data shows that it is sufficient for Overpower's texture and geometry demands. The GPU's PCIe 4.0 x16 interface provides ample bandwidth for data transfer from the CPU, and the 1x 16-pin power connector with 550 W suggested PSU ensures stable power delivery.

FAQ

Q: What is the average FPS at 4K Ultra settings?

A: The measured average FPS at 3840x2160 with Ultra settings is 77 FPS. This is the lowest average frame rate recorded across all tested configurations, and it falls below the 80 FPS threshold that many players consider necessary for smooth gameplay.

Q: How does the RTX 4070 compare to its nearest rivals in benchmark scores?

A: The RTX 4070 has an average benchmark score of 37648, placing it in the 81st percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 4080 Mobile, scores 38135, which is 1.3% higher. The AMD Radeon RX Vega 56 scores 37507, which is 0.4% lower, and the NVIDIA Tesla P4 scores 37628, just 0.1% lower.

Q: What is the best preset for 1440p gaming?

A: At 2560x1440, the Ultra preset delivers 91 FPS average, while High delivers 109 FPS and Medium delivers 118 FPS. For the best balance of visual quality and performance, the High preset at 109 FPS is recommended, as it offers a significant improvement over Ultra's 91 FPS while maintaining high visual fidelity.

Q: Does the Ryzen 9 9900X3D bottleneck the RTX 4070 in Overpower?

A: The data shows that at 1080p Low settings, the system achieves 212 FPS, which indicates the CPU is capable of feeding the GPU at very high frame rates. The 12-core, 24-thread processor with a boost clock of 5.50 GHz provides ample processing power, and the CPU's 91st percentile ranking among all CPUs supports this conclusion.

Q: What is the minimum FPS recorded at 1080p Medium settings?

A: The minimum FPS at 1920x1080 with Medium settings is 112 FPS, with a maximum of 152 FPS and an average of 132 FPS. This represents the only complete min/max data available in the measured results, showing a 40 FPS range between minimum and maximum.

Q: How does the CPU's benchmark score compare to its nearest rivals?

A: The AMD Ryzen 9 9900X3D has an average benchmark score of 54762, placing it in the 91st percentile. Its nearest rival, the Intel Core Ultra 5 245KF, scores 55093, which is 0.6% higher. The Intel Core Ultra 5 245K scores 54053, which is 1.3% lower, and the Intel Xeon 6505P scores 53701, which is 2% lower.

CPU Role

The AMD Ryzen 9 9900X3D serves as the computational backbone for this system, and its impact on Overpower's performance is evident in the high frame rates achieved at lower resolutions. The processor features 12 cores and 24 threads based on the Zen 5 architecture, codenamed Granite Ridge, manufactured on TSMC's 4 nm process node. The base clock of 4.40 GHz and boost clock of 5.50 GHz provide the single-thread performance necessary for game logic and physics calculations. The 128 MB of L3 cache is particularly beneficial for gaming workloads, as it reduces memory latency and improves data access patterns.

The CPU's benchmark results demonstrate its capability to support high frame rates. The Cinebench R23 multicore score of 47737 and single-core score of 6739 indicate strong computational throughput for both multithreaded and single-threaded tasks. The Geekbench multicore score of 22884 and single-core score of 3041 further validate the processor's performance. The 3DMark 16-thread score of 12490 and max-thread score of 13795 show that the CPU can handle the thread counts typical of modern game engines. The PassMark multithread score of 56154 and single-thread score of 4646 round out the performance picture.

The CPU's memory support for DDR5 with dual-channel configuration and 89.6 GB/s bandwidth ensures that data can flow efficiently between the processor and system memory. The 24 PCIe Gen 5 lanes provide high-bandwidth connectivity for the GPU and other peripherals. The 120 W TDP is reasonable for a 12-core processor, and the unlocked multiplier allows for overclocking if desired. The integrated Radeon Graphics provide a fallback display output, though the discrete RTX 4070 handles all gaming rendering.

The CPU's percentile ranking of 91st among all CPUs confirms its high-end positioning. Its nearest rival, the Intel Core Ultra 5 245KF, scores 55093 on average, which is just 0.6% higher than the Ryzen 9 9900X3D's 54762. This close margin indicates that the two processors are essentially performance peers in general benchmarks. The Intel Core Ultra 5 245K trails by 1.3%, and the Intel Xeon 6505P trails by 2%. In Overpower specifically, the CPU's contribution is most apparent at 1080p Low settings, where the 212 FPS result suggests that the processor can keep up with the GPU's output without becoming a bottleneck.

Measured FPS Breakdown

The complete measured FPS data for Overpower with the AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 4070 covers four settings presets across three resolutions, providing a comprehensive view of the system's performance envelope.

At 1920x1080, the Low preset delivers the highest average FPS at 212, followed by Medium at 132, High at 123, and Ultra at 102. The Medium preset has the only complete min/max data at this resolution, with a minimum of 112 FPS and maximum of 152 FPS. The 110 FPS difference between Low and Ultra at 1080p demonstrates the significant performance cost of higher graphical settings. The Ultra preset's 102 FPS average means that even at maximum settings, the system maintains a playable frame rate at 1080p.

At 2560x1440, the Low preset achieves 189 FPS average, which is 23 FPS lower than at 1080p. The Medium preset delivers 118 FPS with a minimum of 100 and maximum of 135, representing a 14 FPS drop from 1080p. High settings produce 109 FPS average, and Ultra settings produce 91 FPS. The scaling from 1080p to 1440p shows an average decrease of approximately 12-15 FPS across presets, with Ultra experiencing the largest absolute drop of 11 FPS. The 1440p Ultra result of 91 FPS remains comfortably playable.

At 3840x2160, the Low preset delivers 160 FPS average, which is 29 FPS lower than at 1440p and 52 FPS lower than at 1080p. The Medium preset achieves 100 FPS with a minimum of 85 and maximum of 115, providing the only complete data at 4K. High settings produce 93 FPS average, and Ultra settings produce 77 FPS. The 4K Ultra result falls below 80 FPS, which is the only configuration in the entire dataset to do so. The scaling from 1440p to 4K shows an average decrease of approximately 14-16 FPS across presets, with Ultra experiencing a 14 FPS drop.

The overall pattern across all resolutions and settings reveals that the system performs best at 1080p with Low settings (212 FPS) and worst at 4K with Ultra settings (77 FPS). The Medium preset consistently provides the most stable frame delivery, as evidenced by the complete min/max data showing tight ranges. The High preset offers the best balance of performance and visual quality at 4K, with 93 FPS average. The measured data confirms that this combination of CPU and GPU can handle Overpower at high frame rates across the vast majority of configurations, with only 4K Ultra falling below the 80 FPS threshold. The combination ranks 642nd out of 2980 tested combinations, placing it in the top 21.5% of all tested hardware configurations for this game.