Overpower

The Intel Core Ultra 5 245 and NVIDIA GeForce RTX 4070 combination delivers a remarkably consistent experience in Overpower, with the data indicating that the GPU is the primary scaling factor across the board. The pairing ranks 642nd out of 2,980 tested combinations in this title, placing it in the top quartile of all tested hardware combos. Across all four settings presets and three resolutions, the system never dips below a 77 FPS average, which suggests that the hardware is well-matched for this action title.

Settings Recommendations

The measured FPS data shows that the "High" preset offers the best balance of visual fidelity and performance for this specific CPU-GPU pairing. At 1080p, the High preset delivers an average of 123 FPS, which is a 21 FPS improvement over the Ultra preset's 102 FPS average, while still maintaining a significant jump in quality over the Medium preset's 132 FPS. The drop from High to Medium is only 9 FPS at 1080p, but the visual quality difference between these two tiers is typically substantial enough to justify the slight performance cost.

At 1440p, the High preset maintains a solid 109 FPS average, which is well above the 91 FPS seen at Ultra settings. This 18 FPS difference represents a 16.5% performance gain, and for a fast-paced action game, this margin can be the difference between a smooth experience and one that occasionally stutters during intense combat sequences. The 4K data further reinforces this recommendation: High settings produce a 93 FPS average at 3840x2160, while Ultra drops to 77 FPS. The 16 FPS gap between these settings at 4K is substantial, and the fact that High remains above the 90 FPS threshold at this resolution suggests it is the optimal choice for players who want to maintain high refresh rates without sacrificing too much visual detail.

The Medium preset is a viable alternative for players who prioritize frame rate above all else, particularly at 4K where it delivers 100 FPS on average. However, the jump from Medium to High only costs 7 FPS at 4K (100 to 93), which is a minimal penalty for what is typically a noticeable improvement in texture quality and shadow detail. The Low preset, while delivering the highest possible frame rates (212 FPS at 1080p), strips away too much visual information for an action game that likely relies on environmental cues. The data suggests that High is the sweet spot, with Ultra being reserved for players with high refresh rate monitors who are willing to accept lower average frame rates in exchange for maximum graphical fidelity.

CPU Role

The Intel Core Ultra 5 245 is a 14-core, 14-thread processor based on the Arrow Lake architecture, manufactured on a 3 nm process by TSMC. It features a base clock of 3.50 GHz and a boost clock of 5.10 GHz, with 24 MB of shared L3 cache. The processor's benchmark results show strong single-thread performance, with a Cinebench R23 single-core score of 4,648 and a Passmark single-thread score of 4,394. This single-thread strength is critical for action games like Overpower, which typically rely on a few heavily loaded threads for game logic and physics calculations.

The CPU's 14 cores and 14 threads (no hyperthreading) are unusual for a modern desktop processor, but the 5.10 GHz boost clock compensates for the lack of simultaneous multithreading in gaming workloads. The Passmark multithread score of 38,706 and Cinebench R23 multicore score of 32,924 indicate strong overall throughput, but the game's performance scaling suggests that Overpower is not heavily multithreaded. The data shows that moving from 1080p to 4K at the same settings results in a consistent frame rate drop that aligns with GPU load scaling rather than CPU limitations.

The processor's 90th percentile ranking among all CPUs places it in the top 10% of tested processors. Its nearest rival, the AMD Ryzen 7 PRO 5755G, scores 49,196 on average, which is only 0.4% higher than the Core Ultra 5 245's average benchmark score of 48,995. The Intel Core i5-14600K is also close, scoring 48,618, which is 0.8% lower. This competitive positioning means the CPU is unlikely to be the bottleneck in Overpower, especially when the GPU is running at 4K resolutions where pixel throughput becomes the dominant factor.

The CPU's memory bandwidth of 102.4 GB/s over a dual-channel DDR5 interface is adequate for feeding the RTX 4070's 12 GB of GDDR6X memory, and the PCIe Gen 5 support with 20 lanes ensures that the GPU has ample bandwidth for data transfer. The integrated Arc Xe-LPG Graphics 64EU provides a fallback for basic display output but is not relevant for gaming performance with a discrete GPU installed.

GPU Role

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture and features 5,888 shading units, 184 texture mapping units, and 64 raster operation units. It operates at a base clock of 1920 MHz with a boost clock of 2475 MHz, and its 12 GB of GDDR6X memory runs at an effective speed of 21 Gbps across a 192-bit bus, resulting in a memory bandwidth of 504.2 GB/s. The GPU's FP32 performance of 29.15 TFLOPS and its 46 ray tracing cores make it a capable performer for modern action titles.

The GPU's benchmark results show a Passmark G3D score of 26,927 and a Geekbench Vulkan score of 174,152, placing it at the 81st percentile among all GPUs. Its average benchmark score of 37,648 is nearly identical to the NVIDIA Tesla P4's 37,628 (0.1% difference) and the AMD Radeon RX Vega 56's 37,507 (0.4% difference). The RTX 4080 Mobile scores 38,135, which is 1.3% higher, indicating that the desktop RTX 4070 performs at a level comparable to a high-end mobile part.

In Overpower, the GPU is clearly the limiting component at higher resolutions. The data shows a consistent pattern: at 1080p Low, the system achieves 212 FPS, which drops to 189 FPS at 1440p Low and 160 FPS at 4K Low. This scaling pattern indicates that the GPU is being pushed harder as resolution increases, and the frame rate drops are proportional to the pixel count increase. The 4K Ultra average of 77 FPS represents the GPU's maximum workload in this game, and it still maintains playable frame rates.

The RTX 4070's 12 GB of VRAM is sufficient for all tested settings in Overpower, as evidenced by the fact that even the Ultra preset at 4K maintains a 77 FPS average without showing signs of memory-related stuttering. The 504.2 GB/s memory bandwidth ensures that texture streaming at high resolutions does not become a bottleneck, and the 64 ROPs provide adequate pixel throughput for the 3840x2160 resolution.

FAQ

*Q: What is the best resolution to play Overpower with this hardware?*

A: The data shows that 1440p High settings provide an excellent balance, delivering 109 FPS average. This is well above the 60 FPS threshold for smooth gameplay and only 14 FPS lower than the 1080p High result, while offering significantly more visual detail than 1080p.

Q: How does the Ultra preset compare to High at 4K?

A: At 3840x2160, the Ultra preset averages 77 FPS, while High averages 93 FPS. This 16 FPS difference represents a 17.2% performance penalty for Ultra settings, which may not be worth the visual improvements depending on your preference for frame rate over graphical fidelity.

Q: Is the CPU or GPU the primary bottleneck in this game?

A: The data indicates the GPU is the primary bottleneck at higher resolutions. The frame rate drops from 1080p to 4K are consistent with GPU scaling, and the CPU's strong single-thread performance (4,648 in Cinebench R23 single-core) is sufficient to keep up with the GPU's output across all tested configurations.

Q: Can this system maintain 100+ FPS at 4K?

A: Yes, but only at Medium settings. The 4K Medium preset averages 100 FPS with a minimum of 85 FPS and a maximum of 115 FPS. The High preset drops to 93 FPS average, and Ultra falls to 77 FPS.

Q: What is the frame time consistency like at 1440p Medium?

A: The 1440p Medium preset shows a minimum of 100 FPS and a maximum of 135 FPS, with an average of 118 FPS. This 35 FPS range between minimum and maximum indicates some variance, but the 100 FPS minimum ensures that frame times remain consistent enough for smooth gameplay.

*Q: How does the RTX 4070's performance in Overpower compare to its overall benchmark standing?*

A: The GPU ranks at the 81st percentile among all GPUs, and its performance in Overpower aligns with this positioning. The 4K Ultra average of 77 FPS and the 1080p Ultra average of 102 FPS are consistent with the GPU's Passmark G3D score of 26,927, which places it in the upper tier of graphics cards.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals clear insights into which component is limiting performance at each resolution. At Low settings, the system delivers 212 FPS at 1080p, 189 FPS at 1440p, and 160 FPS at 4K. The drop from 1080p to 1440p is 23 FPS (10.8% reduction), and from 1440p to 4K is 29 FPS (15.3% reduction). This relatively modest scaling indicates that at Low settings, the CPU is beginning to play a more significant role, as the GPU has enough headroom to render frames quickly but the processor cannot feed it fast enough to maintain the same percentage of performance.

At High settings, the scaling is more pronounced: 123 FPS at 1080p, 109 FPS at 1440p, and 93 FPS at 4K. The drop from 1080p to 1440p is 14 FPS (11.4% reduction), and from 1440p to 4K is 16 FPS (14.7% reduction). This pattern shows that as settings increase, the GPU becomes more heavily utilized, and the frame rate drops become more closely tied to pixel count. The 4K High result of 93 FPS is 75.6% of the 1080p High result, which is consistent with the pixel count ratio of 4K to 1080p (approximately 4x pixels, but not 4x slower due to GPU efficiency gains at higher resolutions).

The Ultra preset shows the steepest scaling curve: 102 FPS at 1080p, 91 FPS at 1440p, and 77 FPS at 4K. The drop from 1080p to 1440p is 11 FPS (10.8% reduction), and from 1440p to 4K is 14 FPS (15.4% reduction). The 4K Ultra result of 77 FPS is 75.5% of the 1080p Ultra result, nearly identical to the High preset's scaling ratio. This consistency across settings strongly suggests that the GPU is the primary limiting factor at higher resolutions, as the CPU's performance headroom is not being fully utilized when the GPU is under heavy load.

The data reveals that the frame rate scaling is not linear with pixel count. Moving from 1080p to 4K quadruples the pixel count, but the frame rate only drops by approximately 25% across all settings. This indicates that Overpower benefits from GPU architecture efficiencies at higher resolutions, and the RTX 4070's Ada Lovelace architecture is well-suited to handle the increased workload without proportional performance losses.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. The Low preset averages 212 FPS, which is the maximum measured performance for this configuration. Medium settings reduce the average to 132 FPS, with a minimum of 112 FPS and a maximum of 152 FPS. High settings produce a 123 FPS average, while the Ultra preset averages 102 FPS. The progression from Low to Ultra at 1080p shows a total reduction of 110 FPS (51.9%), with the most significant drop occurring between Low and Medium (80 FPS, or 37.7% reduction).

At 2560x1440, the performance scales down proportionally. Low settings average 189 FPS, which is 23 FPS lower than the 1080p Low result. Medium settings deliver 118 FPS average, with a minimum of 100 FPS and a maximum of 135 FPS. High settings average 109 FPS, and Ultra settings produce 91 FPS. The gap between Medium and High at 1440p is only 9 FPS (7.6% reduction), which is smaller than the 12 FPS gap between High and Ultra (11.0% reduction). This suggests that the transition from High to Ultra is more demanding than Medium to High at this resolution.

At 3840x2160, the system maintains playable frame rates across all settings. Low settings average 160 FPS, which is still well above the 144 Hz refresh rate common on high-end monitors. Medium settings deliver 100 FPS average, with a minimum of 85 FPS and a maximum of 115 FPS. High settings reduce the average to 93 FPS, and Ultra settings bring it down to 77 FPS. The 4K Medium result of 100 FPS average is notable because it is the only 4K configuration that maintains a triple-digit average, and its 85 FPS minimum still exceeds the 60 FPS threshold for smooth gameplay.

The full data table shows a clear hierarchy: Low settings always deliver the highest frame rates, followed by Medium, High, and Ultra in descending order. The performance gap between Low and Medium is consistently the largest across all resolutions, typically exceeding 40% reduction. The gap between Medium and High is relatively small, ranging from 6.8% at 1080p (132 to 123) to 7.6% at 1440p (118 to 109). The gap between High and Ultra is also consistent, ranging from 9.2% at 1080p (123 to 102) to 11.0% at 1440p (109 to 91). This consistent scaling pattern indicates that the settings presets are well-calibrated and that the game engine responds predictably to changes in graphical quality.