Overpower

# Overpower with AMD Ryzen 9 9900X + NVIDIA GeForce RTX 3070

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 3070 delivers a consistently playable experience in Overpower across all tested resolutions. The recorded data spans three resolutions (1920x1080, 2560x1440, 3840x2160) and four quality presets (Low, Medium, High, Ultra), with average frame rates ranging from 63 FPS at 4K Ultra up to 174 FPS at 1080p Low. This combination ranks 1584 out of 3713 tested combos in the game database, placing it in the upper-middle tier of configurations.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a clear GPU-bound pattern at higher resolutions, while the CPU shows its strength at lower settings. At Low settings, the average FPS drops from 174 at 1080p to 155 at 1440p, a decrease of 19 FPS (approximately 10.9 percent). Moving from 1440p to 4K Low, the average falls further to 132 FPS, another 23 FPS reduction (approximately 14.8 percent). The cumulative drop from 1080p Low to 4K Low is 42 FPS, or roughly 24.1 percent, indicating that even at the lowest quality preset, resolution scaling has a measurable impact.

At Medium settings, the pattern shifts slightly. The average FPS at 1080p is 109, dropping to 97 at 1440p (a 12 FPS decline, about 11 percent) and then to 82 at 4K (a further 15 FPS decline, about 15.5 percent). The min FPS values also scale down: 92 at 1080p, 82 at 1440p, and 70 at 4K, showing that the frame time consistency degrades as pixel count increases. The max FPS follows a similar trajectory: 125 at 1080p, 111 at 1440p, and 95 at 4K.

High settings produce a steeper scaling curve. At 1080p, the average is 101 FPS; at 1440p, it drops to 90 FPS (an 11 FPS decline, about 10.9 percent); at 4K, it falls to 76 FPS (a 14 FPS decline, about 15.6 percent). The total loss from 1080p High to 4K High is 25 FPS, approximately 24.8 percent. This consistent percentage drop across Low, Medium, and High suggests that the scaling behavior is stable regardless of preset, with each resolution step costing roughly 10 to 15 percent of performance.

Ultra settings show the most pronounced resolution penalty. The average at 1080p is 84 FPS, falling to 75 FPS at 1440p (a 9 FPS drop, about 10.7 percent) and then to 63 FPS at 4K (a 12 FPS drop, about 16 percent). The 4K Ultra result of 63 FPS is the lowest recorded value in the entire dataset, yet it remains above the 60 FPS threshold for smooth gameplay. The scaling from 1080p Ultra to 4K Ultra totals 21 FPS, roughly 25 percent, which mirrors the relative loss seen at other presets.

The data indicates that the RTX 3070 becomes the limiting component as resolution increases. The consistent percentage-based drops across all settings point to a GPU that is saturated at 4K, while the 1080p results show headroom that the CPU can fill. The Ryzen 9 9900X, with its 12 cores and 24 threads, does not appear to bottleneck the GPU at any tested resolution, as the frame rate scaling follows a predictable pixel-count-driven pattern rather than showing erratic CPU-related stalls.

GPU Role

The NVIDIA GeForce RTX 3070 uses the GA104 chip built on Samsung's 8 nm process, with 17,400 million transistors on a 392 mm² die. Its memory configuration consists of 8 GB of GDDR6 on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. The base clock is 1500 MHz with a boost clock of 1725 MHz, while the memory runs at 1750 MHz (14 Gbps effective). These specifications place the RTX 3070 at the 61st percentile among all GPUs in the database, with an average benchmark score of 17208.

The nearest rivals in the database provide context for the RTX 3070's standing. The AMD Radeon RX 7600 XT scores 17083, which is 0.7 percent lower than the RTX 3070's average. The NVIDIA GeForce GTX 690 scores 17037, 1 percent lower, and the AMD Radeon HD 7970M scores 17019, 1.1 percent lower. On the upper side, the NVIDIA Tesla K40c scores 17468, which is 1.5 percent higher. These deltas are all within a narrow 2.6 percent band, indicating that the RTX 3070 sits in a tightly contested performance tier.

In Overpower, the RTX 3070's 8 GB VRAM capacity appears sufficient for all tested settings, as no texture-related stutter or loading issues can be inferred from the recorded FPS data. The 4K Ultra average of 63 FPS suggests that the GPU is fully utilized at this extreme, while the 1080p Low average of 174 FPS demonstrates that the card can push well beyond display refresh rates when the workload is light. The 20.31 TFLOPS of FP32 compute and 317.4 GTexel/s texture rate provide the raw throughput needed for the action genre's particle effects and geometry density.

The GPU's 46 ray tracing cores and 184 tensor cores are present in the architecture, though the measured FPS data does not isolate ray tracing workloads. The DirectX 12 Ultimate support (12_2), OpenGL 4.6, and Vulkan 1.4 API compatibility ensure that Overpower can leverage modern rendering paths. The pixel rate of 165.6 GPixel/s and ROP count of 96 help explain why the card scales predictably across resolutions: the fill rate is adequate for 1080p and 1440p, but 4K's 8.3 million pixels per frame (at 3840x2160) pushes the card to its limits, as evidenced by the 63 FPS Ultra result.

CPU Role

The AMD Ryzen 9 9900X is a 12-core, 24-thread processor based on the Zen 5 architecture (Granite Ridge codename), manufactured on TSMC's 4 nm process. It features a base clock of 4.40 GHz and a boost clock of 5.60 GHz, with a TDP of 120 W. The cache hierarchy includes 80 KB of L1 per core, 1 MB of L2 per core, and a shared 64 MB L3 cache. Memory support is DDR5 dual-channel with 89.6 GB/s bandwidth, and the CPU sits on the AM5 socket with PCIe Gen 5 (24 lanes from the CPU).

The processor's benchmark scores establish its position in the database. It achieves a 3DMark single-thread score of 1286, a 3DMark 2-thread score of 2519, and a 3DMark 16-thread score of 12552. The max-thread score of 13929 shows strong scaling across all 24 threads. In Cinebench R23, the multicore score is 32172 and the single-core score is 2253, while Geekbench reports 22174 multicore and 3010 single-core. The PassMark multithread score is 54643, with a single-thread score of 4672. The average benchmark score is 57498, placing the CPU at the 92nd percentile among all processors.

The nearest CPU rivals in the database show tight competition. The AMD EPYC 9015 has an average score of 57555, which is 0.1 percent higher than the Ryzen 9 9900X. The AMD EPYC 7313 scores 57399, 0.2 percent lower. The Intel Core i9-14900 scores 58115, 1.1 percent higher, and the Intel Xeon Platinum 8260M scores 58323, 1.4 percent higher. These deltas are minimal, placing the Ryzen 9 9900X in a performance cluster where no single processor holds a decisive advantage.

In Overpower, the CPU's role is evident from the 1080p Low result of 174 FPS, which is the highest average in the dataset. At this resolution and preset, the GPU has the least work to do, so the CPU's 12 cores and 24 threads must keep up with the rendering requests. The boost clock of 5.60 GHz provides high single-thread performance (Cinebench R23 single-core score of 2253), which is critical for the game's main thread. The L3 cache of 64 MB helps maintain data locality for game assets, and the 4 nm process node allows high clocks without excessive power draw.

The fact that 1080p Low achieves 174 FPS while 1080p Ultra drops to 84 FPS indicates that the CPU is not the limiting factor at any tested setting. If the CPU were a bottleneck, the frame rate at 1080p Low would cap well below the GPU's potential, but the scaling from Low to Ultra at 1080p (174 to 84 FPS, a 90 FPS or 51.7 percent drop) aligns with a GPU-bound scenario. The Ryzen 9 9900X's 3DMark 8-thread score of 9114 and 4-thread score of 4886 suggest that the game can utilize multiple cores effectively, while the single-thread score of 1286 ensures responsive frame pacing.

FAQ

*Q: What is the highest average frame rate recorded for this combo in Overpower?*

A: The highest average is 174 FPS at 1920x1080 with Low settings. The next highest is 155 FPS at 2560x1440 Low, followed by 132 FPS at 3840x2160 Low.

Q: Does the combo maintain 60 FPS at 4K Ultra settings?

A: Yes. The recorded average at 3840x2160 Ultra is 63 FPS, which is 3 FPS above the 60 FPS threshold. This is the lowest average in the dataset, but it remains playable.

Q: How does the Ryzen 9 9900X compare to its nearest rival, the Intel Core i9-14900?

A: The Intel Core i9-14900 has an average benchmark score of 58115, which is 1.1 percent higher than the Ryzen 9 9900X's 57498. The delta is small, indicating near-parity in overall performance.

Q: What is the frame rate difference between 1080p and 4K at High settings?

A: At High settings, the average FPS drops from 101 at 1080p to 76 at 4K, a decrease of 25 FPS (approximately 24.8 percent). The 1440p High average is 90 FPS.

Q: How does the RTX 3070's average benchmark score compare to the AMD Radeon RX 7600 XT?

A: The RTX 3070 has an average benchmark score of 17208, while the RX 7600 XT scores 17083. The RTX 3070 is 0.7 percent higher, making the two cards very close in overall performance.

Q: What are the min and max FPS values recorded at Medium settings?

A: At 1080p Medium, the min FPS is 92 and the max is 125, with an average of 109. At 1440p Medium, the min is 82 and the max is 111, averaging 97. At 4K Medium, the min is 70 and the max is 95, averaging 82.

Settings Recommendations

The measured FPS data provides clear guidance for optimal settings at each resolution. At 1920x1080, all four presets deliver averages above 84 FPS, so the choice depends on the desired visual quality. High settings at 101 FPS offer a strong balance between fidelity and smoothness, while Ultra at 84 FPS still provides a comfortable margin above 60 FPS. For players who prioritize maximum frame rates, Low at 174 FPS exceeds the refresh rate of most 144 Hz monitors.

At 2560x1440, the Medium preset delivers 97 FPS average with a min of 82 FPS, making it the safest choice for consistent performance. High settings at 90 FPS are also viable, and Ultra at 75 FPS remains above the 60 FPS threshold. Low at 155 FPS is available for competitive play, though the visual tradeoff is substantial. The 1440p Medium min of 82 FPS ensures that even demanding scenes stay fluid.

At 3840x2160, the selection narrows. Medium settings produce an 82 FPS average with a 70 FPS min, which is the recommended preset for 4K gaming with this combo. High at 76 FPS is playable, but the min FPS is not recorded for this preset, so the Medium min of 70 FPS provides more certainty. Ultra at 63 FPS is just above the 60 FPS line, but the lack of a recorded min FPS makes it a riskier choice for scenes with heavy action. Low at 132 FPS is available for those who prefer maximum smoothness over visual detail.

The data indicates that Medium is the optimal preset across all three resolutions, as it consistently provides the best balance between average FPS and recorded min FPS. At 1080p Medium, the 109 FPS average with a 92 FPS min offers a robust experience; at 1440p Medium, the 97 FPS average with an 82 FPS min maintains stability; at 4K Medium, the 82 FPS average with a 70 FPS min stays comfortably playable. The Ultra presets, while visually superior, sacrifice 25 to 30 percent of performance compared to Medium at each resolution.

Measured FPS Breakdown

The complete measured dataset for the AMD Ryzen 9 9900X and NVIDIA GeForce RTX 3070 in Overpower is as follows:

1920x1080:

• Low: 174 FPS average
• Medium: 109 FPS average, 92 FPS min, 125 FPS max
• High: 101 FPS average
• Ultra: 84 FPS average

2560x1440:

• Low: 155 FPS average
• Medium: 97 FPS average, 82 FPS min, 111 FPS max
• High: 90 FPS average
• Ultra: 75 FPS average

3840x2160:

• Low: 132 FPS average
• Medium: 82 FPS average, 70 FPS min, 95 FPS max
• High: 76 FPS average
• Ultra: 63 FPS average

The min and max FPS values are only recorded for the Medium preset at each resolution. At 1080p Medium, the spread between min and max is 33 FPS (92 to 125), indicating moderate frame time variance. At 1440p Medium, the spread is 29 FPS (82 to 111), slightly tighter. At 4K Medium, the spread narrows to 25 FPS (70 to 95), showing that the GPU's workload becomes more consistent as it nears full utilization. The absence of min and max values for Low, High, and Ultra presets means the database only captures average performance for those settings, so frame time stability cannot be assessed for them.

The combo rank of 1584 out of 3713 total combos places this configuration in the 57th percentile among all tested systems for Overpower. The GPU's 61st percentile and CPU's 92nd percentile in their respective databases indicate that the CPU is a stronger component relative to its peers, while the GPU is mid-pack. The measured FPS results reflect this: the CPU provides ample headroom, but the RTX 3070 sets the ceiling, particularly at 4K where the 63 FPS Ultra result marks the lower boundary of playable performance.