Overpower
This combination provides smooth gameplay with an average of 118 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 73 | 88 | 94 | 151 |
| 1440p QHD | 86 | 103 | 111 | 178 |
| 1080p Full HD | 96 | 116 | 125 | 199 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 7 9850X3D + AMD Radeon RX 9070, In-Depth Analysis
Overpower is an action title that stresses both processor and graphics silicon, and the combination of the AMD Ryzen 7 9850X3D and AMD Radeon RX 9070 produces a spread of frame rates that clearly delineates where each component carries the load. The measured data shows a system that is exceptionally strong at high refresh rates but begins to show its limits at 4K Ultra, where the GPU's 16 GB of memory and RDNA 4.0 architecture are the decisive factors.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and consistent across all settings, indicating a shift from a CPU-bound scenario at lower resolutions to a GPU-bound one at higher pixel counts. At Low settings, the average FPS falls from 199 at 1920x1080 to 178 at 2560x1440, a reduction of 21 FPS or roughly 10.6%. Moving to 3840x2160 at Low yields 151 FPS, which is 48 FPS below the 1080p result — a 24.1% decline. This pattern is typical of a CPU that can feed frames quickly at lower resolutions, with the GPU becoming the bottleneck as resolution increases.
At Ultra settings, the scaling is even more pronounced. The 1920x1080 Ultra average is 96 FPS, dropping to 86 FPS at 2560x1440 (a 10.4% decrease), and then falling to 73 FPS at 3840x2160 — a 24% reduction from the 1080p figure. The gap between Low and Ultra at 4K is 78 FPS (151 vs 73), which is a massive 51.7% performance difference. This wide spread suggests that the RX 9070's 16 GB VRAM is sufficient even at 4K, but the shading units and texture rate are overwhelmed by the combination of high resolution and Ultra settings.
The Medium preset shows the most interesting scaling pattern, as it is the only setting tier with min and max FPS recorded. At 1080p Medium, the average is 125 FPS with a min of 106 and max of 143. At 1440p Medium, the average drops to 111 FPS (min 94, max 128), and at 4K Medium, it averages 94 FPS (min 80, max 109). The min FPS at 4K Medium is 80, which is only 7 FPS above the 4K Ultra average of 73 — suggesting that even at Medium settings, the GPU is working hard to maintain playable frame rates at 4K.
The resolution scaling data indicates that the CPU has substantial headroom at 1080p, where even Low settings produce 199 FPS, but the GPU's performance ceiling is reached between 1440p and 4K. The 4K High average of 88 FPS is 15 FPS lower than the 1440p High result of 103 FPS, and the 4K Ultra average of 73 FPS is 13 FPS below the 1440p Ultra figure. This consistent 13-15 FPS penalty for moving from 1440p to 4K suggests that the RX 9070's 644.6 GB/s memory bandwidth and 36.13 TFLOPS FP32 throughput are the limiting factors at higher resolutions.
How This Combo Ranks
The combination of the Ryzen 7 9850X3D and Radeon RX 9070 ranks 835th out of 2,980 tested combos in Overpower, placing it in the 72nd percentile of all system configurations. This is a solid mid-to-upper tier ranking, but it is not a top-tier result. The rank of 835 out of 2,980 means that roughly 2,145 other combos perform better, while about 2,145 perform worse — the system sits firmly in the upper third of tested configurations.
Given the CPU's percentile ranking of 92 versus all CPUs, the combo's overall rank is dragged down by the GPU, which only reaches the 69th percentile versus all GPUs. This discrepancy is telling: the processor is a top 8% part, but the graphics card is merely above average. In Overpower, the combo rank of 835 suggests that the GPU is the limiting factor for overall performance, as a stronger GPU paired with this CPU would likely yield a significantly higher rank.
The CPU's nearest rivals in synthetic benchmarks include the Intel Xeon Platinum 8260M (0.1% higher average score), Intel Core i9-14900 (0.5% higher), AMD Ryzen AI 9 HX 470 (0.7% lower), and Intel Xeon w5-2545 (0.2% lower). These delta percentages are all within 1%, meaning the 9850X3D is essentially tied with these processors in average benchmark scores. However, in a gaming context like Overpower, the 3D V-Cache architecture likely provides an advantage that synthetic benchmarks may not fully capture.
For the GPU, the nearest rivals are the NVIDIA GeForce RTX 2080 SUPER (1.2% higher), AMD Radeon RX 6800S (0.8% lower), NVIDIA GeForce GTX TITAN Z (0.6% higher), and NVIDIA GeForce RTX 3080 Mobile (1.1% higher). The RX 9070 is within 1.2% of all these rivals, making it competitively positioned in the mid-range GPU market. The combo rank of 835 reflects this GPU's mid-pack status when paired with a top-tier CPU.
CPU Role
The AMD Ryzen 7 9850X3D is an 8-core, 16-thread processor based on the Zen 5 architecture, codenamed Granite Ridge, built on TSMC's 4 nm process. Its base clock is 4.70 GHz with a boost clock of 5.60 GHz, and it has a TDP of 120 W. The cache configuration includes 80 KB of L1 per core, 1 MB of L2 per core, and 96 MB of shared L3 cache — this large L3 is the hallmark of the X3D series and is designed to reduce memory latency in gaming workloads.
In Overpower, the CPU's role is most evident at 1080p Low, where the average FPS reaches 199. This high frame rate is only achievable if the CPU can feed the GPU with enough draw calls and game logic updates. The 5.60 GHz boost clock, combined with the 96 MB L3 cache, allows the 9850X3D to maintain high minimum frame rates even when the game's simulation thread is heavily loaded. The measured data shows no min FPS recorded for 1080p Low, which suggests the frame pacing was consistent enough that a minimum wasn't flagged as noteworthy.
Synthetic benchmarks reinforce the CPU's capability. The Cinebench R23 multicore score is 22,807, and the single-core score is 2,228. The PassMark single-thread score is 4,704, and the multithread score is 41,318. These numbers place the CPU in the 92nd percentile versus all CPUs, confirming its position as a high-end gaming processor. The 8-core, 16-thread configuration is well-suited for modern games that can utilize multiple threads, and the 4 nm process node keeps power efficiency reasonable at 120 W TDP.
The CPU's memory support for DDR5 with dual-channel 89.6 GB/s bandwidth is adequate for feeding the GPU at high frame rates. The PCIe Gen 5.0 interface with 24 lanes ensures that the RX 9070 can communicate with the processor without bandwidth constraints. However, in Overpower, the CPU rarely appears to be the bottleneck except at the lowest resolution and settings, where the 199 FPS result at 1080p Low shows the processor's ability to push the GPU to its limits.
Measured FPS Breakdown
At 1920x1080, the system delivers an average of 199 FPS at Low settings, 125 FPS at Medium (min 106, max 143), 116 FPS at High, and 96 FPS at Ultra. The spread from Low to Ultra is 103 FPS, which is substantial. The Medium preset shows a min of 106 FPS, which is still well above 60 FPS, indicating smooth gameplay even during demanding scenes. The High preset at 116 FPS is 9 FPS below Medium, while Ultra is 20 FPS below High — this suggests that Ultra settings impose a significant additional load on the GPU, likely due to enhanced shadows, reflections, and anti-aliasing.
At 2560x1440, the results are 178 FPS at Low, 111 FPS at Medium (min 94, max 128), 103 FPS at High, and 86 FPS at Ultra. The Medium preset at 1440p has a min of 94 FPS, which is still above 90 FPS, providing a comfortable experience. The Ultra preset at 86 FPS is close to the 4K High result of 88 FPS, indicating that the GPU's workload at 1440p Ultra is similar to 4K High — both are heavy on the graphics pipeline. The 1440p Low result of 178 FPS is only 21 FPS below the 1080p Low figure, showing that the CPU can still deliver high frame rates at this resolution.
At 3840x2160, the average FPS drops to 151 at Low, 94 at Medium (min 80, max 109), 88 at High, and 73 at Ultra. The 4K Medium min of 80 FPS is the lowest minimum recorded in the entire dataset, suggesting that even Medium settings can cause frame drops at 4K. The 4K Ultra average of 73 FPS is below the 1440p Ultra figure by 13 FPS, and the 4K High result of 88 FPS is 15 FPS below 1440p High. The 4K Low result of 151 FPS is still highly playable, but the drop from 199 FPS at 1080p Low to 151 FPS at 4K Low represents a 24.1% reduction in performance.
The data shows a consistent pattern: Medium settings provide the best balance of visual quality and performance across all resolutions, with the min FPS always staying above 80 FPS. High settings are playable but show diminishing returns, and Ultra settings are only recommended for 1080p and 1440p where the average FPS remains above 86.
GPU Role
The AMD Radeon RX 9070 is built on the RDNA 4.0 architecture, codenamed Navi 48, and manufactured on TSMC's 4 nm process. It features 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. The boost clock is 2520 MHz, with a game clock of 2070 MHz and a base clock of 1330 MHz. The GPU has 3,584 shading units, 224 texture mapping units, and 128 raster operation pipelines, along with 56 ray tracing cores.
In Overpower, the GPU's role is most critical at 4K resolutions, where the average FPS drops below 100 for all settings except Low. The 16 GB VRAM is sufficient for the game's textures at 4K, but the GPU's compute throughput of 36.13 TFLOPS FP32 becomes the limiting factor. The texture rate of 564.5 GTexel/s and pixel rate of 322.6 GPixel/s are the specifications that determine how quickly the GPU can fill the screen with rendered frames.
The GPU's synthetic benchmarks show a PassMark G3D score of 25,381 and a 3DMark Steel Nomad DX12 score of 6,290. These numbers place the GPU in the 69th percentile versus all GPUs, which is notably lower than the CPU's 92nd percentile. The nearest rivals include the NVIDIA GeForce RTX 3080 Mobile (1.1% higher average score) and the AMD Radeon RX 6800S (0.8% lower), indicating that the RX 9070 is competitive with last-generation high-end laptop GPUs but not with current desktop flagships.
The GPU's 220 W TDP and dual-slot design suggest it is a mainstream power user card, and the 2x 8-pin power connectors indicate it requires substantial power delivery. The 550 W suggested PSU is reasonable for a system with this GPU and the 120 W TDP CPU. In Overpower, the GPU's performance at 4K Ultra (73 FPS) is below the 60 FPS threshold that many players consider ideal, but at 1440p Ultra (86 FPS) and 1080p Ultra (96 FPS), it delivers smooth gameplay.
Settings Recommendations
The measured FPS data points to Medium settings as the optimal choice for this combination across all resolutions. At 1080p Medium, the average is 125 FPS with a min of 106 FPS, providing a large margin above 60 FPS. At 1440p Medium, the average is 111 FPS with a min of 94 FPS, still well above the 60 FPS target. Even at 4K Medium, the average is 94 FPS with a min of 80 FPS, which is playable and smooth.
High settings are a viable alternative for players who prioritize visual fidelity over frame rate. At 1080p High, the average is 116 FPS; at 1440p High, it is 103 FPS; and at 4K High, it is 88 FPS. These numbers are all above 60 FPS, making High a solid choice for gamers with 144Hz monitors at 1080p or 1440p. However, the 4K High result of 88 FPS is 6 FPS lower than the 4K Medium average, and the visual difference between High and Medium may not justify the frame rate loss.
Ultra settings are only recommended for 1080p and 1440p gaming. At 1080p Ultra, the average is 96 FPS, which is still smooth, and at 1440p Ultra, the average is 86 FPS. However, at 4K Ultra, the average drops to 73 FPS, which is below the 80 FPS threshold that many players consider ideal for fast-paced action games. The 4K Ultra result also shows no min FPS data, suggesting that frame pacing may be inconsistent.
Low settings are unnecessary for this hardware combination, as even the most demanding preset at 4K (Ultra at 73 FPS) is playable. The Low preset at 1080p (199 FPS) and 1440p (178 FPS) is overkill for any monitor refresh rate currently available, and the visual quality sacrifice would be significant. Players with 240Hz or 360Hz monitors might consider Low at 1080p to maximize frame rate, but the Medium preset at 125 FPS is likely sufficient for most gaming scenarios.
The best experience per the measured rows is Medium settings at 1440p, which delivers an average of 111 FPS with a min of 94 FPS. This combination provides high visual quality with a frame rate that exceeds most 144Hz monitors' refresh rates, ensuring smooth gameplay without the performance penalty of Ultra settings. For 4K, Medium at 94 FPS is the recommended choice, as it maintains a min of 80 FPS, avoiding the frame drops that occur at High and Ultra.
Hardware Specifications
AMD Ryzen 7 9850X3D
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + AMD Radeon RX 9070 in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 151.0 |
| 3840x2160 | Medium | 94.0 |
| 3840x2160 | High | 88.0 |
| 3840x2160 | Ultra | 73.0 |
| 2560x1440 | Low | 178.0 |
| 2560x1440 | Medium | 111.0 |
| 2560x1440 | High | 103.0 |
| 2560x1440 | Ultra | 86.0 |
| 1920x1080 | Low | 199.0 |
| 1920x1080 | Medium | 125.0 |
| 1920x1080 | High | 116.0 |
| 1920x1080 | Ultra | 96.0 |
Overpower with Ryzen 7 9850X3D + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 9070 + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.