Overpower

The AMD Ryzen 7 9700X paired with the NVIDIA GeForce RTX 4060 delivers a highly playable experience in Overpower, but the data clearly reveals where this combination's strengths and limitations lie. The benchmark results show a system that can comfortably handle high refresh rates at 1080p and remains respectable at 1440p, though 4K demands significant settings compromises. This analysis breaks down the measured performance to help you decide where to set your expectations and your in-game graphics options.

Resolution Scaling

The FPS scaling across resolutions follows a predictable pattern, but the margins between them tell a critical story about what is bottlenecking this system. At 1920x1080 with Low settings, the combo produces an average of 155.7 FPS. Moving to 2560x1440 at the same settings drops that to 137.5 FPS, a reduction of roughly 13%. At 3840x2160 with Low settings, the average falls to 117.5 FPS, which is another 15% drop from 1440p. This relatively modest scaling from 1080p to 4K — a total decrease of about 25% — indicates that at Low settings, the CPU is still doing a significant amount of the work, and the GPU has enough headroom to absorb the increased pixel count without collapsing.

The picture changes dramatically when you switch to Ultra settings. At 1080p Ultra, the average is 75.6 FPS. At 1440p Ultra, it drops to 63.6 FPS, a 16% decline. However, the jump to 4K Ultra is punishing: the average plummets to 58.6 FPS. This is only a 8% drop from 1440p to 4K, but the absolute frame rate is now below the 60 FPS threshold. The narrowing percentage gap between 1440p and 4K at Ultra settings suggests that the GPU is now the primary limiting factor; it is so heavily loaded that adding more pixels has a diminished relative impact because it is already near its performance ceiling. In contrast, at Low settings, the GPU is less stressed, allowing the CPU's performance to be more influential, which is why the frame rates remain higher and scale more gracefully.

GPU Role

The RTX 4060's specifications directly explain the performance ceilings observed. With 8 GB of GDDR6 memory on a 128-bit bus delivering 272.0 GB/s of bandwidth, the card is well-suited for 1080p and capable at 1440p, but its memory subsystem is a constraint at higher resolutions with demanding presets. The boost clock of 2460 MHz is respectable, but the card's architecture is what it is; the data shows that the Ultra preset at 1440p and 4K pushes the GPU into a state where it cannot maintain the fluidity seen at lower settings. The card's 15.11 TFLOPS of FP32 performance is clearly sufficient for Overpower at lower settings, but the jump to Ultra at 4K exposes its limits, as seen in the sub-60 FPS result.

Compared to its nearest rivals, the RTX 4060 sits in a specific performance tier. Its average benchmark score of 23181 places it just 0.7% above the Intel Arc B580 and 0.8% above the AMD Radeon 760M. It is also only 0.6% behind the AMD Radeon RX 6600M. This confirms that the RTX 4060 is in a tight competitive cluster, and your experience in Overpower will be very similar to what you would get from those cards. The 66th percentile ranking among all GPUs indicates it is a solid mid-range performer, not a high-end enthusiast part. The data shows that the 8 GB VRAM capacity is likely the most significant factor preventing higher frame rates at 4K with Ultra settings, as the card is not running out of raw compute power but rather struggling with the memory demands of the high-resolution textures.

FAQ

*Q: Can this combo run Overpower at 4K with a smooth experience?*

A: Yes, but only with significant settings adjustments. At 3840x2160 with Low settings, the average FPS is 117.5, which is very smooth. At Medium settings, it drops to 70.9 FPS, and at High it is 68.3 FPS. However, at Ultra settings, the average falls to 58.6 FPS, which is below the common 60 FPS target for a "smooth" experience.

Q: What is the best resolution for this hardware?

A: The data strongly supports 1920x1080 as the best resolution. At 1080p, all settings presets produce playable frame rates. Even the most demanding Ultra preset averages 75.6 FPS, while High settings yield 90 FPS. This resolution allows you to use higher settings without worrying about frame rate dips.

Q: How much of a performance hit is taking the settings from High to Ultra?

A: The penalty is noticeable but not massive. At 1080p, moving from High (90 FPS) to Ultra (75.6 FPS) is a 16% reduction. At 1440p, the same settings change drops the average from 77.9 FPS to 63.6 FPS, an 18% decrease. At 4K, you go from 68.3 FPS to 58.6 FPS, which is a 14% drop and pushes you under 60 FPS.

Q: Is the CPU or the GPU the limiting factor in this combo?

A: It depends on the settings. At Low settings, the frame rate difference between 1080p (155.7 FPS) and 4K (117.5 FPS) is relatively small, suggesting the CPU is playing a larger role. At Ultra settings, the frame rates are much closer across resolutions, indicating the GPU is the primary bottleneck, particularly at 4K where it averages 58.6 FPS.

Q: How does this RTX 4060 compare to other GPUs in its class?

A: The data shows it is extremely competitive with its direct rivals. Its average benchmark score of 23181 is just 0.7% higher than the Intel Arc B580 (23021) and only 0.6% lower than the AMD Radeon RX 6600M (23321). Performance in Overpower should be nearly identical to those cards.

Q: What is the ideal settings preset for a 1440p monitor?

A: For 2560x1440, the High preset offers a strong balance. It averages 77.9 FPS, which is well above the 60 FPS target. The Medium preset is also viable at 83.2 FPS, but Ultra (63.6 FPS) is close to the edge and may dip in demanding scenes.

How This Combo Ranks

In the comprehensive database of tested CPU and GPU combinations for Overpower, this pairing of the AMD Ryzen 7 9700X and NVIDIA GeForce RTX 4060 holds a rank of 991 out of 1744 tested combos. This places it in the middle of the pack, which is a reasonable position for a mid-range CPU and GPU pairing. It is not a top-tier combination that will dominate high-refresh-rate 4K gaming, but it is far from a low-end setup. The ranking suggests that there are many more powerful and expensive combinations, but this one is positioned to beat a large portion of the field.

The CPU itself is a strong performer, with an average benchmark score of 36029 and a percentile ranking of 89 among all CPUs. This indicates that the Ryzen 7 9700X is not the weak link in this system; it is a high-end processor that can easily keep up with more powerful GPUs. Its nearest rival, the Intel Core i5-14500HX, scores 35940, which is a negligible 0.2% difference. This means the CPU is providing a solid foundation, and the overall combo rank is primarily a reflection of the RTX 4060's mid-range performance level. The GPU's 66th percentile ranking is the more limiting factor, and it is what keeps this combo from climbing higher in the overall standings.

Measured FPS Breakdown

The following table details the exact average frame rates measured for this combo, organized by resolution and settings preset.

| Resolution | Settings | Average FPS |

| :--------- | :------- | ----------: |

| 3840x2160 | Low | 117.5 |

| 3840x2160 | Medium | 70.9 |

| 3840x2160 | High | 68.3 |

| 3840x2160 | Ultra | 58.6 |

| 2560x1440 | Low | 137.5 |

| 2560x1440 | Medium | 83.2 |

| 2560x1440 | High | 77.9 |

| 2560x1440 | Ultra | 63.6 |

| 1920x1080 | Low | 155.7 |

| 1920x1080 | Medium | 93.8 |

| 1920x1080 | High | 90.0 |

| 1920x1080 | Ultra | 75.6 |

Settings Recommendations

For a 1080p display, the Ultra preset is the best choice. The 75.6 FPS average is well within the range of a high-refresh-rate monitor and provides the best visual fidelity without sacrificing playability. If you are sensitive to frame rate drops, the High preset at 90 FPS offers a significant buffer and is a more conservative but equally excellent choice.

At 1440p, the High preset is the clear winner. It delivers 77.9 FPS, which is smooth and visually impressive. While Medium (83.2 FPS) offers a small performance boost, the visual quality difference is likely worth the small FPS cost. Avoid Ultra (63.6 FPS) unless you have a variable refresh rate monitor, as it can dip below 60 FPS.

At 4K, you must compromise on settings to maintain high frame rates. The Low preset is the only one that provides a truly high frame rate experience at 117.5 FPS. However, if you prefer higher visual quality, the High preset at 68.3 FPS is a good balance, and Medium at 70.9 FPS is nearly identical. The Ultra preset at 58.6 FPS is not recommended for a "smooth" experience, as it is below the 60 FPS standard. In this scenario, the data suggests prioritizing frame rate over maximum graphical detail.