Overpower

# Overpower with AMD Ryzen 7 7700X + NVIDIA GeForce RTX 5090 D

The AMD Ryzen 7 7700X paired with the NVIDIA GeForce RTX 5090 D delivers exceptional frame rates in Overpower, placing this combination at rank 23 out of 2,980 tested combos. Across all resolutions and settings, the measured data shows a system that remains fluid even at 4K Ultra, though the scaling patterns reveal interesting dynamics about where the bottleneck shifts between CPU and GPU as resolution increases.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial but not catastrophic, which tells a clear story about the limiting component at each resolution. At Low settings, the system produces 277 FPS at 1920x1080, 266 FPS at 2560x1440, and 248 FPS at 3840x2160. That represents a modest 4% decline from 1080p to 1440p, and a further 6.8% drop to 4K. The total reduction from 1080p Low to 4K Low is just 29 FPS, or roughly 10.5%. This relatively shallow scaling curve at Low settings strongly suggests the CPU is the primary constraint—even at 4K, the RTX 5090 D has ample headroom to render frames quickly, and the Ryzen 7 7700X's 8 cores and 16 threads are the limiting factor.

The picture changes dramatically at Ultra settings. Here, the system delivers 157 FPS at 1080p, 140 FPS at 1440p, and 119 FPS at 4K. The drop from 1080p to 4K is 38 FPS, or 24.2%. This steeper decline indicates that at higher quality presets, the GPU becomes increasingly responsible for the frame rate ceiling. The RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are being pushed harder, and the resolution scaling reflects the growing pixel throughput demands.

Medium settings show a similar pattern to High, with 204 FPS at 1080p, 182 FPS at 1440p, and 155 FPS at 4K. The 4K-to-1080p ratio here is 0.76, meaning 4K delivers 76% of the 1080p performance. At Low settings, that ratio improves to 0.90, while at Ultra it falls to 0.76 as well. Interesting that Low and Ultra show nearly identical relative scaling, though from vastly different absolute levels.

High settings produce 189 FPS at 1080p, 169 FPS at 1440p, and 144 FPS at 4K. The 4K number is 76.2% of the 1080p figure, aligning closely with the Medium and Ultra ratios. This consistency across three of four presets suggests that beyond Low, the rendering workload scales predictably with pixel count, and the GPU's 104.8 TFLOPS FP32 compute is the dominant factor in determining final output.

How This Combo Ranks

At rank 23 out of 2,980 tested combinations, this pairing sits in the top 0.8% of all systems evaluated in Overpower. That puts it in elite territory, though not at the absolute pinnacle—22 other CPU-GPU pairings deliver higher average frame rates in this title.

The GPU itself carries a percentile ranking of 92 versus all GPUs, meaning it outperforms 92% of graphics cards in the database's benchmark suite. Its average benchmark score of 77,712 places it just ahead of the AMD Radeon RX 6650M XT (76,904, a 1.1% delta) but slightly behind the AMD Radeon RX 6850M XT (78,940, a -1.6% delta). The NVIDIA Tesla P100 PCIe variants are close as well, with the 12 GB model scoring 79,396 (-2.1%) and the 16 GB version at 79,605 (-2.4%). These narrow margins indicate the RTX 5090 D is competitive but not dominant in synthetic tests, yet in Overpower specifically, the measured FPS tells a more favorable story.

The CPU's percentile ranking is 85, with an average benchmark score of 35,909. Its nearest rivals are tightly clustered: the AMD Ryzen 7 PRO 5845 scores 35,802 (0.3% delta), the Intel Core 7 250H scores 35,728 (0.5%), the AMD Ryzen AI 7 PRO 350 scores 35,719 (0.5%), and the Intel Core Ultra 9 185H scores 35,670 (0.7%). All four rivals sit within 0.7% of the Ryzen 7 7700X, suggesting that CPU performance is highly competitive in this segment and unlikely to be the differentiating factor in game performance.

The combination of a top-tier GPU (92nd percentile) with a high-end CPU (85th percentile) results in a system that ranks in the 99th percentile overall for Overpower. The data implies that for this specific title, the GPU's contribution to the final ranking is more significant than the CPU's, given the wider gap between the GPU and its competitors.

Settings Recommendations

For the best balance of visual quality and frame rate, High settings at 2560x1440 appear to be the sweet spot. The data shows 169 FPS average at 1440p High, which is comfortably above the 144 Hz refresh rate common on gaming monitors. Moving up to Ultra at the same resolution drops performance to 140 FPS—still playable, but a 17.2% reduction for what may be marginal visual gains.

At 4K, High settings deliver 144 FPS, which matches the 144 Hz target exactly. This makes 4K High the recommended configuration for users with high-refresh 4K displays. The Medium preset at 4K produces 155 FPS with a minimum of 132 FPS, providing a small but meaningful safety margin for frame time consistency. Ultra at 4K falls to 119 FPS, which is still smooth but below the 120 Hz threshold that some monitors target.

For competitive play where maximum frame rates matter, Low settings at 1080p achieve 277 FPS, and even at 4K Low the system maintains 248 FPS. The gap between Low and Medium at 1080p is 73 FPS (277 vs 204), suggesting that the Medium preset imposes significant additional rendering work without a proportional visual benefit in fast-paced action scenes.

The measured minimum FPS data is only available for Medium settings, showing 174 FPS at 1080p, 155 FPS at 1440p, and 132 FPS at 4K. These minimums are remarkably high, indicating that even in demanding scenes, the system maintains excellent frame pacing. The maximums for Medium settings reach 235 FPS at 1080p, 209 FPS at 1440p, and 178 FPS at 4K, showing consistent headroom above the averages.

Measured FPS Breakdown

At 1920x1080, the full settings ladder shows: Low at 277 FPS, Medium at 204 FPS (minimum 174, maximum 235), High at 189 FPS, and Ultra at 157 FPS. The progression from Low to Ultra represents a 43.3% reduction in frame rate, which is a substantial cost for the highest quality preset. The step from Low to Medium is the largest single drop at 73 FPS, while Medium to High costs 15 FPS, and High to Ultra costs another 32 FPS.

Moving to 2560x1440, the numbers are: Low at 266 FPS, Medium at 182 FPS (minimum 155, maximum 209), High at 169 FPS, and Ultra at 140 FPS. The total reduction from Low to Ultra is 126 FPS, or 47.4%. The Medium-to-High gap narrows to just 13 FPS at this resolution, while High-to-Ultra still costs 29 FPS.

At 3840x2160, the results are: Low at 248 FPS, Medium at 155 FPS (minimum 132, maximum 178), High at 144 FPS, and Ultra at 119 FPS. The Low-to-Ultra spread is 129 FPS, or 52%. The Medium-to-High difference at 4K is only 11 FPS, making High an attractive option over Medium for users who want improved visuals without significant performance loss.

Comparing across resolutions at the same setting, Low shows the smallest absolute differences: 277 at 1080p, 266 at 1440p, 248 at 4K. Medium shows 204, 182, and 155 respectively. High shows 189, 169, and 144. Ultra shows 157, 140, and 119. In every case, the 1080p-to-1440p drop is smaller than the 1440p-to-4K drop, confirming that 4K imposes a disproportionately higher rendering load.

GPU Role

The NVIDIA GeForce RTX 5090 D is built on the Blackwell 2.0 architecture with the GB202 chip, fabricated on a 5 nm process at TSMC. It contains 92,200 million transistors on a 750 mm² die, giving it a transistor density of 122.9M per mm². The GPU operates at a base clock of 2017 MHz and boosts to 2407 MHz, with memory running at 1750 MHz (28 Gbps effective).

The 32 GB of GDDR7 memory on a 512-bit bus delivers 1.79 TB/s of bandwidth, which is critical for high-resolution gaming. At 4K Ultra, the game's texture and geometry demands can consume significant memory, and the 32 GB capacity ensures no capacity-related stuttering. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s provide the raw throughput needed to sustain the measured frame rates.

The GPU's 21,760 shading units, 680 TMUs, and 176 ROPs work together to produce the 104.8 TFLOPS of FP32 compute. The 170 RT cores and 680 tensor cores provide dedicated hardware for ray tracing and AI-enhanced features, though the measured FPS data does not specify whether these features are enabled. The FP16 performance matches FP32 at 104.8 TFLOPS (1:1 ratio), which is notable for a consumer GPU.

In Overpower, the GPU's role becomes more pronounced as resolution increases and settings move toward Ultra. The benchmark scores show the RTX 5090 D at 44,065 in Passmark G3D, 14,326 in 3DMark Steel Nomad DX12, and 310,674 in Geekbench OpenCL. The Vulkan score of 376,915 is particularly strong, suggesting excellent low-level API performance that likely benefits this Action game title.

CPU Role

The AMD Ryzen 7 7700X is a Zen 4 architecture processor codenamed Raphael, built on a 5 nm process at TSMC. It features 8 cores and 16 threads with a base clock of 4.50 GHz and boost clock of 5.40 GHz. The 105W TDP indicates efficient power delivery for the performance class, and the unlocked multiplier allows for overclocking headroom.

The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. This 32 MB L3 is particularly important for gaming, as it allows frequently accessed data to remain close to the cores. The dual-channel DDR5 memory support with 83.2 GB/s bandwidth provides ample memory throughput for feeding the GPU at high frame rates.

The CPU's 3DMark scores show strong scaling from 2,112 in the 2-thread test to 8,859 in the 16-thread test, with 8-thread performance at 7,057. This indicates that the processor scales well with thread count, though the single-thread score of 1,090 is the foundation for gaming performance. Cinebench R23 results show 19,088 multicore and 1,987 single-core, while Geekbench reports 12,451 multicore and 2,289 single-core.

In Overpower, the CPU's role is most evident at Low settings and lower resolutions. The fact that 1080p Low achieves 277 FPS while 4K Low achieves 248 FPS—a difference of only 29 FPS—suggests that the CPU is capable of feeding frames at rates exceeding 250 FPS even when the GPU has relatively little work to do. The Passmark multithread score of 35,686 and single-thread score of 4,190 confirm that this processor has the computational throughput to avoid becoming a bottleneck in most scenarios.

FAQ

Q: What is the maximum frame rate achievable with this combo in Overpower?

A: The highest measured average FPS is 277 at 1920x1080 with Low settings. At 4K Low, the system still achieves 248 FPS, demonstrating that even at maximum resolution with minimal quality settings, frame rates remain exceptionally high.

Q: How does this combo rank among all tested systems in Overpower?

A: This pairing ranks 23rd out of 2,980 tested combinations, placing it in the top 0.8% of all systems evaluated. The GPU's 92nd percentile ranking and CPU's 85th percentile ranking contribute to this elite positioning.

Q: Is the RTX 5090 D significantly better than its nearest GPU rivals?

A: The data shows the RTX 5090 D scores 77,712 on average, which is 1.1% ahead of the AMD Radeon RX 6650M XT but 1.6% behind the AMD Radeon RX 6850M XT. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB are 2.1% and 2.4% ahead respectively, indicating the 5090 D is competitive but not the outright leader in synthetic benchmarks.

Q: What is the best resolution for 144 Hz gaming?

A: At 4K High settings, the system delivers exactly 144 FPS average, making this configuration ideal for 144 Hz 4K displays. For 1440p, High settings provide 169 FPS with headroom, while Ultra drops to 140 FPS—slightly below the 144 Hz target.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 7700X scores 35,909 on average, placing it 0.3% ahead of the AMD Ryzen 7 PRO 5845, 0.5% ahead of both the Intel Core 7 250H and AMD Ryzen AI 7 PRO 350, and 0.7% ahead of the Intel Core Ultra 9 185H. These margins are extremely tight, showing that CPU performance is closely matched in this segment.

Q: Does the 32 GB VRAM provide any advantage in Overpower?

A: The 32 GB of GDDR7 memory on a 512-bit bus with 1.79 TB/s bandwidth ensures that memory capacity is never a limiting factor, even at 4K Ultra settings. While the measured data does not show memory usage, the high bandwidth and capacity support the consistent frame rates observed across all tested configurations.