Overpower

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 D pairing in Overpower delivers a compelling 1080p and 1440p experience, but the data reveals a distinct shift in bottleneck behavior as resolution climbs. The measured frames per second (FPS) across all settings and resolutions show a system that is heavily GPU-bound at 4K, yet increasingly CPU-sensitive at lower resolutions.

Resolution Scaling

The FPS drop from 1080p to 4K is moderate but telling. At Medium settings, the average frame rate falls from 155 FPS at 1920x1080 to 141 FPS at 3840x2160, a reduction of 14 FPS. The gap widens at Low settings, where the average drops from 185 FPS at 1080p to 169 FPS at 4K, a 16 FPS difference. This pattern indicates that while the RTX 5090 D is powerful enough to push high frame rates at 4K, the scaling is not perfectly linear, suggesting that the CPU's six cores and twelve threads are beginning to limit performance at lower resolutions where the GPU has more headroom.

At Ultra settings, the resolution scaling is tighter. The average frame rate goes from 141 FPS at 1080p to 136 FPS at 1440p, and then down to 119 FPS at 4K. The 22 FPS drop between 1440p and 4K is the largest single-step decline in the data, highlighting that the GPU is being fully utilized at the highest resolution and preset. This is expected behavior for a high-end card like the RTX 5090 D, which carries a 575 W TDP and 32 GB of GDDR7 memory on a 512-bit bus.

The limiting component shifts based on preset. At Low settings, the CPU becomes the primary constraint, as evidenced by the relatively small 16 FPS drop from 1080p to 4K. The Ryzen 5 5600F, with its 3.00 GHz base clock and 4.00 GHz boost clock, can only feed the GPU so many frames per second. At Ultra settings, the GPU takes over as the bottleneck, with the 119 FPS average at 4K representing the GPU's raw compute limit under heavy shading and texture work. The data suggests that players targeting 4K should stick to High or Medium presets to stay above the 137 FPS mark, while 1080p players can push Ultra without sacrificing much performance.

CPU Role

The Ryzen 5 5600F is a Zen 3 Vermeer part built on TSMC's 7 nm process. It features 6 cores and 12 threads, with a 32 MB shared L3 cache. The CPU's PassMark multithread score of 19236 and single-thread score of 2872 place it in the 85th percentile of all CPUs. Its nearest rivals include the Intel Core Ultra 5 225 with an average score of 36938 and a deltaPct of 0, meaning they are statistically tied. The AMD Ryzen 5 5500X3D scores 37018, which is 0.2% higher, while the AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher.

In Overpower, the CPU's role is most apparent at 1080p with Low settings, where the average FPS of 185 is the highest recorded in the entire dataset. This suggests that the CPU is capable of driving high frame rates when the GPU is not under heavy load. However, the CPU's influence wanes as resolution increases. At 4K Ultra, the average FPS of 119 is likely dictated by the GPU's 104.8 TFLOPS FP32 performance and 1,636.8 GTexel/s texture rate, rather than the CPU's 51.2 GB/s memory bandwidth or dual-channel DDR4 support.

The boost clock of 4.00 GHz provides adequate single-thread performance for game logic, but the data shows that the CPU is not the primary limiting factor at higher resolutions. The PassMark physics score of 1043 and find prime numbers score of 120 are modest, but they do not directly translate to gaming performance. The CPU's 65 W TDP is low, indicating efficient power draw, but this does not appear to impact frame rates. The measured results show a system that is well-balanced at 1440p, where the difference between Low (178 FPS) and Ultra (136 FPS) is 42 FPS, a manageable spread that suggests neither component is severely overworked.

Settings Recommendations

The measured data provides clear guidance on which preset offers the best experience. At 1080p, the High preset delivers 151 FPS average, which is only 4 FPS less than Medium (155 FPS) but 10 FPS more than Ultra (141 FPS). The Low preset achieves 185 FPS, but this comes at the cost of visual fidelity. For most players, High at 1080p is the sweet spot, as it offers a 10 FPS advantage over Ultra while maintaining better image quality than Medium.

At 1440p, the Medium preset stands out with an average of 149 FPS and a minimum of 126 FPS, the only preset with a recorded minimum frame time. High follows closely at 145 FPS, while Ultra drops to 136 FPS. The 13 FPS difference between Medium and Ultra is noticeable, but the minimum FPS of 126 on Medium provides a smoother experience than the unrecorded minimums on High and Ultra. Players with high refresh rate 1440p monitors should choose Medium to ensure frame times stay consistent.

At 4K, the High preset is the recommended choice, delivering 137 FPS average. Medium is slightly lower at 141 FPS, but the difference of 4 FPS is negligible. Ultra drops to 119 FPS, which is playable but represents a 18 FPS penalty over High. Low at 4K achieves 169 FPS, but the visual quality reduction is likely too severe for a game like Overpower with detailed textures. The data suggests that High at 4K is the best balance of performance and visual quality, as it stays above the 120 FPS threshold that many players consider the minimum for smooth gameplay.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 D ranks 258th out of 2980 tested combos in Overpower, placing it in the top 8.7% of all combinations. This is a strong showing, but it is not the top tier, which indicates that the CPU is holding back the GPU to some extent. The GPU alone sits in the 92nd percentile of all GPUs, while the CPU is in the 85th percentile, suggesting that the CPU is the weaker link in this pairing.

The ranking reflects the CPU's position relative to its rivals. The Ryzen 5 5600F has an average benchmark score of 36945, which is nearly identical to the Intel Core Ultra 5 225 (36938) and slightly below the AMD Ryzen 5 5500X3D (37018). These rivals are within 0.5% of each other, so the CPU's performance is not a differentiator in this combo. The GPU, however, is a standout, with an average benchmark score of 77712, placing it well above the AMD Radeon RX 6850M XT (78940, deltaPct -1.6) and the NVIDIA Tesla P100 PCIe 16 GB (79605, deltaPct -2.4).

The rank of 258 out of 2980 suggests that there are many combos with faster CPUs that achieve higher frame rates, particularly at lower resolutions. At 4K, the combo performs admirably, but at 1080p, the CPU's limitations are more apparent. The data shows that the combo is better suited for 1440p and 4K gaming, where the GPU's 32 GB of memory and 1.79 TB/s bandwidth are fully utilized. The 170 RT cores and 680 tensor cores also contribute to the GPU's strong showing, but the CPU's 6 cores and 12 threads are adequate rather than exceptional for this workload.

FAQ

*Q: What is the best resolution for this combo in Overpower?*

A: The data shows that 1440p offers the best balance, with High settings achieving 145 FPS average and Medium achieving 149 FPS. At 4K, the combo still performs well, with High settings at 137 FPS, but the CPU becomes less of a factor.

Q: How does the Ryzen 5 5600F compare to its nearest rivals?

A: The CPU's average benchmark score of 36945 is essentially tied with the Intel Core Ultra 5 225 (36938, deltaPct 0). The AMD Ryzen 5 5500X3D scores 0.2% higher, and the AMD Ryzen AI 7 PRO 450 scores 0.4% higher. The Intel Core i9-12900T scores 0.5% higher.

Q: Is the RTX 5090 D the limiting factor at 4K?

A: Yes, at 4K Ultra, the average FPS of 119 is lower than at 1440p Ultra (136 FPS), indicating that the GPU is the primary constraint. The GPU's 104.8 TFLOPS FP32 performance and 1,636.8 GTexel/s texture rate are being fully utilized.

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 185, recorded at 1920x1080 resolution with Low settings. The lowest average FPS is 119, recorded at 3840x2160 with Ultra settings.

Q: Does the combo have any recorded minimum FPS values?

A: Yes, only the Medium settings presets have recorded minimum FPS values. At 1080p, the minimum is 131 FPS; at 1440p, it is 126 FPS; and at 4K, it is 120 FPS.

*Q: How does the combo rank overall in Overpower?*

A: The combo ranks 258th out of 2980 tested combos, placing it in the top 8.7% of all combinations tested in the game.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best performance. Low settings produce an average of 185 FPS. Medium settings yield 155 FPS average, with a minimum of 131 FPS and a maximum of 178 FPS. High settings achieve 151 FPS average, while Ultra settings drop to 141 FPS average. The spread between Low and Ultra is 44 FPS, indicating that the CPU can handle the frame generation at this resolution.

At 2560x1440, the performance remains strong but the gaps narrow. Low settings average 178 FPS. Medium settings average 149 FPS, with a minimum of 126 FPS and a maximum of 171 FPS. High settings average 145 FPS, and Ultra settings average 136 FPS. The difference between Low and Ultra is 42 FPS, nearly identical to 1080p, suggesting that the GPU is starting to become more involved in the rendering pipeline.

At 3840x2160, the GPU takes center stage. Low settings average 169 FPS. Medium settings average 141 FPS, with a minimum of 120 FPS and a maximum of 162 FPS. High settings average 137 FPS, and Ultra settings average 119 FPS. The gap between Low and Ultra is 50 FPS, the largest in the dataset, confirming that the GPU is the primary limiting factor at 4K. The minimum FPS of 120 at Medium settings is the lowest recorded value in the entire dataset, but it still represents a smooth experience for most players.