Overpower

Overpower, the 2023 action title, proves to be a demanding showcase for the AMD Ryzen 7 7700X and NVIDIA GeForce RTX 4080 combination. The measured data reveals a system that delivers high refresh rates at 1440p and remains well above playable thresholds at 4K, with the GPU acting as the primary performance arbiter across the resolution spectrum. The benchmark results indicate a pairing that scales predictably, offering a clear view of where each component's headroom begins and ends.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial, but the pattern is telling. At Ultra settings, the average frame rate descends from 130 FPS at 1920x1080 to 116 FPS at 2560x1440, and then drops more sharply to 99 FPS at 3840x2160. This represents a 24% reduction from 1080p to 1440p, but the gap widens to 31% between 1440p and 4K. The data suggests that while the RTX 4080 has ample headroom at lower resolutions, the pixel-pushing demands of 4K begin to saturate the GPU's capabilities.

The scaling becomes even more pronounced at lower settings, where the CPU has more room to stretch its legs. At Low settings, the system produces 271 FPS at 1080p, 241 FPS at 1440p, and 205 FPS at 4K. The delta between 1080p and 1440p is 30 FPS (11%), while the jump to 4K costs another 36 FPS (15%). This pattern indicates that at Low settings, the Ryzen 7 7700X's 8-core, 16-thread configuration is capable of feeding the GPU sufficiently at 1080p, but the rendering load at higher resolutions progressively shifts the bottleneck toward the graphics card.

Medium settings exhibit the most linear scaling, with averages of 169 FPS at 1080p, 151 FPS at 1440p, and 128 FPS at 4K. The degradation is remarkably consistent, around 11-15% per resolution step. This consistency suggests a balanced workload where neither component is fully saturated, allowing the system to scale predictably. The minimum FPS values at Medium settings further support this: 144 at 1080p, 128 at 1440p, and 109 at 4K, showing that even the worst-case frames remain comfortably above 60 FPS.

What does this mean for the limiting component? At 1080p and Low settings, the 271 FPS figure likely approaches the CPU's practical ceiling for this game, given that the Ryzen 7 7700X's boost clock reaches 5.40 GHz and its single-thread performance scores 1090 in 3DMark. As resolution climbs, the RTX 4080's 16 GB of GDDR6X memory and 716.8 GB/s bandwidth become the deciding factors. The 4K Ultra result of 99 FPS, while lower than lower-resolution results, still demonstrates that this GPU has enough raw throughput to handle Overpower's most demanding configuration without dipping into the 60 FPS territory.

GPU Role

The NVIDIA GeForce RTX 4080 is the undisputed workhorse of this pairing, and its specifications align closely with the measured performance. With a boost clock of 2505 MHz and a base clock of 2205 MHz, the AD103 chip on TSMC's 5 nm process delivers 48.74 TFLOPS of FP32 compute. This raw power translates directly into the frame rates observed, particularly at 4K where the GPU's 112 ROPs and 304 TMUs are fully engaged.

The 16 GB of GDDR6X memory on a 256-bit bus provides 716.8 GB/s of bandwidth, which proves sufficient for Overpower's Ultra preset at 4K. The average of 99 FPS at 3840x2160 Ultra suggests the memory subsystem is not a bottleneck, as the game's textures and geometry are comfortably accommodated. The GPU's 76 RT cores and 304 tensor cores are present, though the measured data does not isolate ray tracing or DLSS performance specifically.

Comparing the RTX 4080 to its nearest rivals in the benchmark database, the data shows it sits in a tight cluster. The RTX 4080's average benchmark score of 54247 is a mere 0.1% ahead of the RTX 4080 SUPER (54209), while the AMD Radeon Pro W5700X (54828) and Radeon RX 6750 GRE 12 GB (55698) are 1.1% and 2.6% behind, respectively. This indicates that within this performance tier, Overpower's frame rates are unlikely to vary dramatically between these GPUs, though the RTX 4080's specific driver optimizations and Ada Lovelace architecture appear well-suited to this title.

At 1080p, the GPU's role becomes less dominant. The 271 FPS at Low settings likely exceeds the refresh rate of most monitors, and the CPU's performance starts to matter more. However, the RTX 4080's 86th percentile ranking among all GPUs suggests it has the headroom to push even higher if the CPU could keep up. The 3DMark Steel Nomad DX12 score of 6567 reflects strong DirectX 12 performance, which aligns with Overpower's modern engine requirements.

Settings Recommendations

The measured data provides clear guidance on the optimal settings for this hardware configuration. At 4K, the High preset delivers 119 FPS, which is a 20% improvement over Ultra's 99 FPS while maintaining visual fidelity that most players would find acceptable. The Medium preset at 4K yields 128 FPS with a minimum of 109 FPS, offering a more substantial safety margin for demanding scenes. Given that the Ultra preset's 99 FPS average is still smooth for many displays, but the Medium preset provides a 29 FPS uplift, the data suggests Medium as the sweet spot for 4K gaming on this rig.

At 1440p, the recommendation shifts toward High. The High preset produces 140 FPS, which is only 11 FPS behind Medium's 151 FPS but delivers noticeably better visuals. The Ultra preset at 116 FPS is still viable, but the 24 FPS gap between Ultra and High makes High the better choice for those prioritizing frame rate stability. The Low preset's 241 FPS is excessive for most displays and sacrifices too much visual quality for a marginal competitive advantage.

For 1080p, the High preset at 157 FPS is the recommended balance. It offers a 27 FPS improvement over Ultra's 130 FPS while remaining 12 FPS behind Medium's 169 FPS. The minimum FPS at Medium is 144, which suggests that even the most demanding sequences stay well within high refresh rate territory. Players with 240Hz displays might consider Medium for the extra headroom, but the visual trade-off is often not worth the 12 FPS gain.

The data indicates that the RTX 4080's performance is best utilized at 1440p High, where the 140 FPS average represents a strong balance of image quality and speed. At 4K, the Medium preset's 128 FPS with a 109 FPS minimum provides the most consistent experience, while at 1080p, the High preset avoids the diminishing returns of Ultra settings.

FAQ

Q: What is the highest average FPS achievable at 4K with this setup?

A: The highest measured average at 3840x2160 is 205 FPS on Low settings. However, for visually acceptable settings, Medium delivers 128 FPS, High delivers 119 FPS, and Ultra delivers 99 FPS.

Q: How does the RTX 4080 compare to its closest rival in benchmark scores?

A: The RTX 4080's average benchmark score of 54247 is 0.1% higher than the RTX 4080 SUPER's 54209. The AMD Radeon Pro W5700X and Radeon RX 6750 GRE 12 GB are 1.1% and 2.6% lower, respectively.

Q: Is the Ryzen 7 7700X a bottleneck at 1080p?

A: At 1080p Low, the system reaches 271 FPS, which suggests the CPU's 8 cores and 16 threads are sufficient for that workload. The single-thread score of 1090 in 3DMark indicates strong per-core performance, so the CPU is likely not the primary limiter at higher settings either.

Q: What is the minimum FPS recorded at 1440p Medium?

A: The minimum FPS at 2560x1440 Medium is 128, with a maximum of 173 and an average of 151. This indicates consistent frame pacing without severe dips.

Q: Does the GPU's memory bandwidth affect 4K performance?

A: The RTX 4080's 716.8 GB/s bandwidth on a 256-bit bus is sufficient for 4K Ultra, as evidenced by the 99 FPS average. The 16 GB GDDR6X capacity prevents memory-related stuttering in Overpower's high-resolution textures.

Q: How does the system rank among all tested combos for Overpower?

A: The combination ranks 201st out of 3713 tested combos, placing it in the top 5.4% of all systems measured for this game.

CPU Role

The AMD Ryzen 7 7700X plays a supporting but crucial role in Overpower's performance. With 8 cores and 16 threads based on Zen 4 architecture, the CPU's boost clock of 5.40 GHz provides the single-thread responsiveness that action games demand. The 3DMark single-thread score of 1090 and 2-thread score of 2112 demonstrate robust per-core performance, while the 16-thread score of 8859 shows that the CPU can handle multi-threaded workloads when needed.

The CPU's 32 MB of shared L3 cache and 1 MB L2 per core help reduce memory latency, which is critical for maintaining high frame rates in CPU-bound scenarios. At 1080p Low, the 271 FPS result suggests the CPU is capable of feeding the GPU at very high rates, though the 3DMark max-threads score of 8852 (nearly identical to the 16-thread score of 8859) indicates that the CPU's scaling plateaus beyond 8 threads for this game's workload.

Comparatively, the Ryzen 7 7700X's average benchmark score of 35909 places it 0.3% ahead of the AMD Ryzen 7 PRO 5845 (35802) and 0.5% ahead of the Intel Core 7 250H (35728) and AMD Ryzen AI 7 PRO 350 (35719). The Intel Core Ultra 9 185H (35670) trails by 0.7%. This tight clustering means that Overpower's frame rates would likely be similar across these CPUs when paired with the same GPU, reinforcing that the RTX 4080 is the dominant factor in this system's performance.

The CPU's memory bandwidth of 83.2 GB/s on dual-channel DDR5 is adequate for the game's streaming requirements, though it is significantly lower than the GPU's 716.8 GB/s. This disparity highlights the different roles: the CPU manages game logic and draw calls, while the GPU handles the bulk of rendering. In Overpower, the 105W TDP and 5 nm process node allow the CPU to sustain high clocks without thermal throttling, as evidenced by the consistent multi-thread scores across various benchmarks.

Measured FPS Breakdown

The complete measured FPS data for this configuration is as follows:

1920x1080:

• Low: 271 FPS average
• Medium: 169 FPS average, 144 FPS minimum, 194 FPS maximum
• High: 157 FPS average
• Ultra: 130 FPS average

2560x1440:

• Low: 241 FPS average
• Medium: 151 FPS average, 128 FPS minimum, 173 FPS maximum
• High: 140 FPS average
• Ultra: 116 FPS average

3840x2160:

• Low: 205 FPS average
• Medium: 128 FPS average, 109 FPS minimum, 147 FPS maximum
• High: 119 FPS average
• Ultra: 99 FPS average

The Medium preset is the only one with recorded minimum and maximum values across all resolutions, providing the most complete picture of frame time consistency. At 1080p Medium, the 144 FPS minimum ensures that even the most intense combat sequences stay well above 100 FPS. At 1440p Medium, the 128 FPS minimum is still excellent for high refresh rate displays. The 4K Medium minimum of 109 FPS demonstrates that the system never dips into the 60 FPS range, even at the highest resolution tested.

The progression from Low to Ultra at each resolution shows a consistent cost for visual fidelity. At 1080p, the jump from Low to Medium costs 102 FPS (from 271 to 169), while Medium to High costs only 12 FPS (from 169 to 157), and High to Ultra costs 27 FPS (from 157 to 130). This suggests that Medium offers the best performance-per-visual investment, with High being the most efficient step up. At 4K, the same pattern holds: Low to Medium costs 77 FPS (from 205 to 128), Medium to High costs 9 FPS (from 128 to 119), and High to Ultra costs 20 FPS (from 119 to 99).

The data shows that the RTX 4080's 16 GB memory capacity is not a limiting factor at any resolution, as even the Ultra preset at 4K maintains a 99 FPS average. The GPU's 86th percentile ranking and the system's 201st place out of 3713 combos confirm that this is a high-end configuration capable of handling Overpower's demands across all settings and resolutions.