Overpower

Overpower, a 2023 Action title, responds predictably to the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 4080 pairing, but the specific frame rates reveal a system that is heavily GPU-bound at higher resolutions. The measured data shows a clear hierarchy where lowering resolution yields diminishing returns, indicating the RTX 4080 is the primary driver of performance in this combination. The following analysis breaks down the measured FPS across resolutions and settings, contextualizes the combo's rank, and examines the individual roles of the CPU and GPU using only the provided benchmark data.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 demonstrates classic scaling behavior for a high-end GPU. At Ultra settings, the average FPS drops from 130 at 1080p to 116 at 1440p, a reduction of 14 FPS. Moving to 4K Ultra, the average falls further to 99 FPS, which is 31 FPS lower than the 1080p result. This 24% drop from 1080p to 4K at Ultra settings is significant, but the absolute numbers remain high, suggesting the RTX 4080 is still well-suited for 4K gameplay.

The scaling pattern shifts when examining Low settings. At 1080p Low, the system achieves 194 FPS. At 1440p Low, it drops slightly to 186 FPS, and at 4K Low, it falls to 177 FPS. The total reduction from 1080p to 4K at Low is only 17 FPS, which is a smaller absolute delta than the 31 FPS drop observed at Ultra. This indicates that at lower settings, the CPU begins to play a more significant role in limiting performance, as the GPU has less work to do per frame. The gap between 1080p and 1440p at Low is just 8 FPS, suggesting the Ryzen 5 5500X3D is keeping pace with the GPU's output at these settings.

The most telling data point for identifying the limiting component comes from the Medium preset. Here, the measured minimum and maximum FPS are provided, offering a clearer picture of frame time consistency. At 1080p Medium, the average is 161 FPS with a minimum of 137 and a maximum of 186. At 1440p Medium, the average is 151 FPS with a minimum of 128 and a maximum of 173. At 4K Medium, the average is 128 FPS with a minimum of 109 and a maximum of 147. The spread between minimum and maximum FPS narrows as resolution increases, which is typical of a GPU-bound scenario where the GPU's consistent workload dominates the frame time. The fact that the average FPS at 4K Medium (128) is still above the 1080p Ultra average (130) reinforces that the GPU is the primary bottleneck at higher resolutions, while the CPU's influence becomes more apparent at lower resolutions.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 4080 holds a comboRankInGame of 461 out of 3713 tested combos. This places the pairing in the top 12.4% of all combinations tested in Overpower. The rank reflects the overall performance of the system across all measured settings and resolutions, indicating that this is a high-performing configuration for this title.

The ranking becomes more meaningful when considering the component-level percentiles. The CPU has a percentileVsAllCpus of 85, meaning it outperforms 85% of all tested CPUs in general benchmarks. The GPU has a percentileVsAllGpus of 86, outperforming 86% of all tested GPUs. The combo rank of 461 is consistent with these individual percentiles, as both components are above the 85th percentile in their respective categories. The slight difference between the CPU's 85th percentile and the GPU's 86th percentile suggests that the GPU is marginally stronger relative to its peers, which aligns with the resolution scaling analysis showing the GPU as the primary performance driver in Overpower.

The nearest rival data for the CPU shows it is closely matched with several other processors. The AMD Ryzen 5 5600F has an average score of 36945, which is just 0.2% lower than the 5500X3D's average of 37018. Similarly, the Intel Core Ultra 5 225 scores 36938, also 0.2% lower. On the other side, the AMD Ryzen AI 7 PRO 450 scores 37093, which is 0.2% higher, and the Intel Core i9-12900T scores 37112, which is 0.3% higher. These deltaPct values are all within a fraction of a percent, indicating that the 5500X3D's performance is essentially equivalent to these rivals in synthetic benchmarks, which likely translates to similar in-game CPU performance at lower resolutions where the CPU is more relevant.

GPU Role

The NVIDIA GeForce RTX 4080 is the dominant component in this pairing for Overpower. Its specifications include 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 716.8 GB/s. This substantial memory bandwidth is crucial for handling the high-resolution textures and effects that Overpower's Ultra preset likely demands. The GPU's base clock is 2205 MHz with a boost clock of 2505 MHz, and its memory operates at an effective speed of 22.4 Gbps. These clock speeds, combined with the 9728 shading units and 112 ROPs, deliver the raw compute power necessary for the high frame rates observed.

The GPU's benchmark scores reinforce its high-end status. Its passmark_g3d score of 34457 is particularly relevant for gaming performance, and its percentileVsAllGpus of 86 confirms it is in the top 14% of all GPUs. The nearest rivals show it is closely matched with the RTX 4080 SUPER, which has an average score of 54209, just 0.1% higher than the RTX 4080's 54247. Interestingly, the AMD Radeon RX 6750 GRE 12 GB and AMD Radeon 8060S have higher average scores (55698 and 55757, respectively), with deltaPct values of -2.6% and -2.7% relative to the RTX 4080, meaning the RTX 4080 actually scores lower on average than these two rivals. However, these synthetic benchmark differences do not necessarily translate directly to Overpower-specific performance, as the measured FPS data shows the RTX 4080 delivering strong results across all settings.

The GPU's 16 GB of VRAM is a key asset for Overpower at 4K resolution. The data shows that at 4K Ultra, the system maintains an average of 99 FPS, which is well above playable thresholds. The large VRAM capacity ensures that texture streaming and high-resolution assets do not cause stuttering or frame drops, which is supported by the measured minimum FPS of 109 at 4K Medium. This minimum FPS figure indicates that even in demanding scenes, the GPU has enough memory and bandwidth to maintain consistent performance.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the user's priority for frame rate versus visual fidelity. For users with a 1920x1080 display, the Ultra preset delivers an average of 130 FPS, which is more than sufficient for smooth gameplay. The High preset at 1080p yields 157 FPS, and Medium yields 161 FPS, while Low reaches 194 FPS. The difference between Medium and High at 1080p is only 4 FPS (161 vs 157), suggesting that High is the better choice for a balance of visual quality and performance, as it offers improved graphics with a negligible frame rate cost.

At 2560x1440, the Ultra preset averages 116 FPS, which is still quite playable for most users. The High preset provides 140 FPS, and Medium provides 151 FPS. The jump from Ultra to High is a 24 FPS improvement, which is substantial. Given that the 1440p High average of 140 FPS is only 6 FPS lower than the 1080p High average of 157 FPS, the resolution upgrade is nearly free in performance terms. Therefore, High at 1440p is the most balanced recommendation, offering a high frame rate with excellent visual detail.

For 3840x2160, the Ultra preset drops to an average of 99 FPS, which is still above 60 FPS but may not satisfy users with high-refresh-rate 4K displays. The High preset at 4K averages 119 FPS, which is a 20 FPS improvement over Ultra. The Medium preset averages 128 FPS, with a minimum of 109 FPS, ensuring consistent performance. The Low preset reaches 177 FPS at 4K, but this sacrifices too much visual quality for most users. The data suggests that High at 4K is the sweet spot, providing 119 FPS average with a significant visual upgrade over Medium and a 20 FPS advantage over Ultra. Given that the 4K High average of 119 FPS is only 21 FPS lower than the 1440p High average of 140 FPS, the 4K experience is highly viable with this combo.

FAQ

Q: What is the average FPS at 1080p Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 130 FPS.

Q: How much faster is Low settings compared to Ultra at 4K?

A: At 3840x2160, the Low preset averages 177 FPS, while Ultra averages 99 FPS, making Low approximately 78 FPS faster.

Q: What is the combo's rank among all tested combinations in Overpower?

A: This combo ranks 461st out of 3713 tested combinations, placing it in the top 12.4%.

Q: Does the 4K Medium preset provide a minimum FPS above 60?

A: Yes, the 4K Medium preset has a minimum FPS of 109, which is well above 60.

Q: Which resolution shows the smallest FPS difference between Low and High settings?

A: At 1920x1080, the difference between Low (194 FPS) and High (157 FPS) is 37 FPS, which is the smallest absolute difference among all resolutions.

Q: How does the CPU's average benchmark score compare to its nearest rival?

A: The AMD Ryzen 5 5500X3D has an average benchmark score of 37018, which is 0.2% higher than the AMD Ryzen 5 5600F's score of 36945.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. The CPU features a 96 MB shared L3 cache, which is a critical asset for gaming performance, as it allows for more data to be stored closer to the cores. The CPU's TDP is 105 W, and it supports DDR4 memory with a dual-channel bus, providing a memory bandwidth of 51.2 GB/s.

In the context of Overpower, the CPU's role becomes more apparent at lower resolutions and settings. The measured FPS data shows that at 1080p Low, the system achieves 194 FPS, while at 4K Low, it achieves 177 FPS. The gap of 17 FPS indicates that the CPU is capable of feeding the GPU at lower resolutions, but the GPU's workload at 4K reduces the overall frame rate. The CPU's passmark_multithread score of 20363 and passmark_single_thread score of 2941 suggest it has solid multi-threaded and single-threaded performance, which is sufficient for Overpower's engine.

The CPU's percentileVsAllCpus of 85 places it above 85% of all tested CPUs. Its nearest rivals are all within a 0.3% deltaPct of its average score of 37018, indicating that the 5500X3D's performance is essentially on par with these alternatives. The Intel Core i9-12900T has the highest average score among the rivals at 37112, which is 0.3% higher, while the AMD Ryzen 5 5600F is 0.2% lower. These small differences are unlikely to produce meaningful variations in Overpower's frame rates, especially given that the GPU is the primary bottleneck at higher resolutions.

The CPU's cache configuration and clock speeds are well-matched to the RTX 4080. The 96 MB L3 cache helps reduce memory latency, which is beneficial for game logic and physics calculations. The boost clock of 4.00 GHz ensures responsive single-threaded performance, which is important for maintaining high frame rates in CPU-bound scenarios. However, the data shows that the CPU is not the limiting factor in most measured configurations, as the frame rate scaling from 1080p to 4K is primarily driven by the GPU's rendering workload.

Measured FPS Breakdown

The complete measured FPS data for this combo is as follows:

1920x1080:

• Ultra: Average 130 FPS
• High: Average 157 FPS
• Medium: Average 161 FPS, Minimum 137 FPS, Maximum 186 FPS
• Low: Average 194 FPS

2560x1440:

• Ultra: Average 116 FPS
• High: Average 140 FPS
• Medium: Average 151 FPS, Minimum 128 FPS, Maximum 173 FPS
• Low: Average 186 FPS

3840x2160:

• Ultra: Average 99 FPS
• High: Average 119 FPS
• Medium: Average 128 FPS, Minimum 109 FPS, Maximum 147 FPS
• Low: Average 177 FPS

The Medium preset is the only setting with complete minimum and maximum FPS measurements. Across all resolutions, the Medium preset shows a consistent pattern: the average FPS decreases with increasing resolution (161 at 1080p, 151 at 1440p, 128 at 4K), and the minimum FPS also decreases (137, 128, 109). The maximum FPS follows the same trend (186, 173, 147). The spread between minimum and maximum FPS narrows as resolution increases: 49 FPS at 1080p, 45 FPS at 1440p, and 38 FPS at 4K. This narrowing spread indicates that at higher resolutions, the frame times become more consistent, which is a hallmark of GPU-bound performance where the GPU's consistent workload dominates.

The Low and High settings show a similar resolution scaling pattern. At Low, the FPS drops from 194 at 1080p to 186 at 1440p, a 4.1% decrease, and then to 177 at 4K, a 4.8% decrease from 1440p. At High, the FPS drops from 157 at 1080p to 140 at 1440p, a 10.8% decrease, and then to 119 at 4K, a 15% decrease from 1440p. The larger percentage drop at High settings compared to Low settings further supports the notion that the GPU becomes more of a bottleneck as the graphical workload increases. The Ultra setting shows the largest percentage drop from 1080p to 4K (23.8%), reinforcing that Ultra is the most demanding preset for the GPU.