Overpower

The AMD Ryzen 7 5800X and AMD Radeon RX 6600 combination lands at rank 1408 out of 1744 tested combos in Overpower. That places this pairing in the bottom quarter of all configurations tested for this title, which is a surprisingly low result given the components' individual benchmark standings. The CPU sits in the 84th percentile among all processors, while the GPU falls into the 69th percentile among all graphics cards. The data suggests that this pairing struggles to translate its component-level strengths into a competitive gaming position, likely due to how the game engine balances loads between the two parts.

How This Combo Ranks

The combo rank of 1408 out of 1744 represents a significant underperformance relative to what the individual parts might suggest. With the CPU at the 84th percentile and the GPU at the 69th percentile, one might expect a mid-pack or slightly above-average gaming result. Instead, this pairing sits in the bottom 19% of all tested combos, indicating that the interaction between these specific components creates a bottleneck that neither part alone would exhibit. The data shows that while the Ryzen 7 5800X is a strong processor in synthetic tests, and the RX 6600 holds its own in GPU benchmarks, their combined performance in Overpower falls well short of what their individual percentiles would predict. This suggests that Overpower's engine may not scale well with this particular combination of 8 cores and 8 GB of VRAM, or that the game's optimization favors different hardware pairings entirely.

GPU Role

The AMD Radeon RX 6600 brings 8 GB of GDDR6 memory on a 128-bit bus, delivering 224.0 GB/s of bandwidth. Its boost clock reaches 2491 MHz, with a game clock of 2044 MHz and a base clock of 1626 MHz. The GPU's 1792 shading units and 64 ROPs produce a pixel rate of 159.4 GPixel/s and a texture rate of 279.0 GTexel/s. In Overpower, the data shows that the GPU's 8 GB VRAM capacity becomes a limiting factor at higher resolutions and settings. At 4K with Ultra settings, the average FPS drops to 41.6, while at 1080p with Low settings, it reaches 117.5. The gap between Low and Ultra settings at the same resolution is substantial: at 1080p, the difference is 60.8 FPS (117.5 vs 56.7), while at 4K, it narrows to 47 FPS (88.6 vs 41.6). This pattern indicates that the GPU's memory bandwidth and capacity are being stressed more heavily as resolution increases, with the game clock of 2044 MHz representing the realistic sustained performance level during gameplay.

FAQ

Q: Is this combo capable of running Overpower at 1080p?

A: Yes, the data shows playable frame rates across all settings at 1920x1080. The average FPS ranges from 56.7 at Ultra settings to 117.5 at Low settings, with High settings delivering 69.5 FPS and Medium at 76 FPS.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the average FPS ranges from 41.6 at Ultra to 88.6 at Low. High settings produce 54.3 FPS and Medium yields 58.7 FPS. The 4K Ultra result falls below the 60 FPS threshold, while lower settings remain playable.

Q: What is the best resolution for this combo?

A: The data indicates that 2560x1440 offers a balanced experience, with High settings at 61.8 FPS and Medium at 67.3 FPS. Ultra at 1440p drops to 49 FPS, while Low reaches 105.7 FPS, making 1440p the highest resolution where all settings remain at least near playable levels.

Q: How does the RX 6600 compare to its nearest rivals in this game?

A: The GPU's average benchmark score of 25235 is essentially tied with the AMD Radeon 890M (25246, 0% delta) and the AMD Radeon RX 580 2048SP (25287, -0.2%). It sits 0.2% ahead of the AMD Radeon RX 6700M (25180) and 0.5% behind the NVIDIA GeForce RTX 3060 Ti (25120).

Q: Does the CPU bottleneck the GPU in this game?

A: The CPU's average benchmark score of 27606 is 0.3% above the AMD Ryzen 7 5800 (27535) and 0.4% below the AMD Ryzen 5 8500GE (27708). Given the combo's low rank of 1408, the data suggests that the GPU's 8 GB VRAM and 128-bit memory bus are the primary constraints in Overpower, rather than the CPU's processing power.

Q: What settings should be used for a 60 FPS target?

A: At 1080p, High settings (69.5 FPS) and Medium (76 FPS) both exceed 60 FPS. At 1440p, High (61.8 FPS) and Medium (67.3 FPS) also meet the target. At 4K, only Low settings (88.6 FPS) achieve 60 FPS, while Medium (58.7 FPS) falls just short.

Measured FPS Breakdown

At 1920x1080, the combo delivers 117.5 FPS on Low, 76 FPS on Medium, 69.5 FPS on High, and 56.7 FPS on Ultra. These numbers show a clear progression where each settings tier costs roughly 10-20 FPS, with the largest single drop occurring from Low to Medium at 41.5 FPS. The 1080p results are the strongest across all resolutions, with only Ultra failing to reach 60 FPS.

Moving to 2560x1440, the average FPS drops to 105.7 on Low, 67.3 on Medium, 61.8 on High, and 49 on Ultra. The delta between Low and Medium here is 38.4 FPS, nearly the same as at 1080p, but the overall scaling is less steep. High settings at 1440p lose 7.7 FPS compared to 1080p, while Ultra loses 7.7 FPS as well, indicating a consistent performance penalty from the resolution increase.

At 3840x2160, the results show 88.6 FPS on Low, 58.7 FPS on Medium, 54.3 FPS on High, and 41.6 FPS on Ultra. The gap between Low and Medium at 4K is 29.9 FPS, smaller than at lower resolutions, suggesting that the GPU is becoming the limiting factor. The 4K Ultra result is the lowest across all tested configurations, falling 15.1 FPS below the 1080p Ultra figure.

Resolution Scaling

The FPS drop from 1080p to 4K reveals how the limiting component shifts as resolution increases. At Low settings, the drop is 28.9 FPS (117.5 to 88.6), representing a 24.6% decrease. At Medium settings, the drop is 17.3 FPS (76 to 58.7), a 22.8% decrease. High settings see a 15.2 FPS drop (69.5 to 54.3), a 21.9% decrease, while Ultra settings drop 15.1 FPS (56.7 to 41.6), a 26.6% decrease. These percentages are relatively consistent across settings, which indicates that the GPU's memory bandwidth of 224.0 GB/s and 8 GB capacity are the primary constraints as resolution scales. The CPU's 51.2 GB/s memory bandwidth and 32 MB L3 cache are not being saturated at any resolution, as evidenced by the fact that even at 1080p Low, the frame rate does not exceed 120 FPS, suggesting the GPU is the bottleneck even at the lowest settings.

CPU Role

The AMD Ryzen 7 5800X provides 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.80 GHz and a boost clock of 4.70 GHz. Its 32 MB of L3 cache and 4,150 million transistors on a 7 nm process give it strong synthetic performance, with a Cinebench R23 multi-core score of 23571 and a single-core score of 3327. In Overpower, the CPU's role appears to be secondary to the GPU's limitations. The combo's rank of 1408 suggests that the game does not heavily utilize the CPU's 16 threads, as the 3DMark 16-thread score of 7586 is close to the max-thread score of 7578, indicating that additional threads beyond 16 provide no benefit. The CPU's nearest rival, the AMD Ryzen 7 5800, scores 27535 on average, a 0.3% difference, while the Intel Core i5-12600KF scores 27827, a -0.8% delta. These close margins in synthetic tests do not translate into meaningful differences in Overpower, as the game's frame rates are consistently limited by the GPU's 8 GB VRAM and 128-bit memory bus. The CPU's 105 W TDP and support for DDR4 memory via dual-channel at 51.2 GB/s are sufficient to feed the GPU, but the data shows that no amount of CPU headroom can overcome the GPU's constraints at higher resolutions and settings.