Overpower

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 2060 combination presents a curious case in the Overpower benchmark database. With a combo rank of 2933 out of 3713 tested combinations, this pairing sits in the lower third of all systems, yet the measured frame rates tell a story of a balanced, if not spectacular, performer. The data suggests a system that is more than capable of delivering playable experiences, though it requires careful attention to settings to maintain high frame rates at demanding resolutions.

Resolution Scaling

The measured FPS data reveals a clear and predictable pattern of performance degradation as resolution increases, but the rate of that degradation offers insight into where the bottleneck lies. At 1080p with Low settings, the system produces 118 FPS. Moving to 1440p drops this to 105 FPS, a relatively modest 11% decrease. However, the jump from 1440p to 4K at Low settings results in 89 FPS, a further 15% reduction. This scaling behavior is typical of a GPU-bound scenario; the CPU has enough headroom at lower resolutions, and the RTX 2060 becomes the limiting factor as pixel count climbs.

The pattern becomes more pronounced at higher graphical presets. At High settings, the system achieves 68 FPS at 1080p, which drops to 61 FPS at 1440p (a 10% reduction) and then to 52 FPS at 4K (a 15% reduction from 1440p). This consistent ~10-15% drop per resolution tier indicates that the GPU's rendering workload is scaling as expected. The RTX 2060, with its 192-bit memory bus and 6 GB of GDDR6, is being pushed harder at each step, and the frame rate responds accordingly.

The most telling data point for bottleneck analysis comes from comparing the Low and Ultra presets at the same resolution. At 1080p, the difference between Low (118 FPS) and Ultra (57 FPS) is a massive 61 FPS. This 51.7% performance hit from settings alone dwarfs the resolution scaling impact. This suggests that Overpower's graphical settings have a profound effect on GPU load, and the RTX 2060's compute resources—its 1920 shading units and 6.451 TFLOPS of FP32 performance—are the primary constraint when visual fidelity is maximized. The CPU, with its 8 cores and 16 threads, is likely not the limiting factor at 1080p Ultra, as the GPU is already saturated.

FAQ

Q: What is the best resolution for this combo to maintain a 60+ FPS average?

A: The data shows that 1080p is the only resolution where all tested settings achieve at least 57 FPS. At 1440p, only Low (105 FPS) and Medium (66 FPS) presets break the 60 FPS barrier. At 4K, only the Low preset (89 FPS) exceeds 60 FPS, while Medium falls just short at 56 FPS.

Q: How does the RTX 2060's performance compare to its nearest rivals in this game?

A: The RTX 2060's average benchmark score is 15290, placing it at the 58th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce GTX 580, has an average score of 15283, a delta of 0%. The AMD Radeon 680M is 0.1% faster, and the RTX 3050 OEM is 0.6% faster. The AMD Radeon RX 7600 is the closest competitor at 0.8% faster, with a score of 15171.

*Q: Is the Ryzen 7 5700G holding back the RTX 2060 in Overpower?*

A: Benchmark results indicate the CPU is not a bottleneck. The Ryzen 7 5700G scores 12830.5 in Cinebench R23 multi-core and 1494 in single-core, placing it in the 79th percentile of all CPUs. Its nearest rival, the Intel Core i9-9900K, is only 0.2% faster. The CPU's 8 cores and 16 threads provide ample processing power for the GPU to reach its potential.

Q: What is the FPS range at Medium settings across all resolutions?

A: The Medium preset is the only one with complete min/max data. At 1080p, the average is 74 FPS with a range of 63-85. At 1440p, the average drops to 66 FPS with a range of 56-76. At 4K, the average is 56 FPS with a range of 47-64.

Q: How does this combo rank among all tested systems?

A: The combo ranks 2933 out of 3713 tested combinations, placing it in the 79th percentile of all combos. This is a below-average ranking, but the measured FPS data shows it can still deliver playable frame rates at 1080p and 1440p with appropriate settings.

Settings Recommendations

The measured data points to a clear hierarchy of playable experiences for this hardware pairing. At 1080p, the Ultra preset delivers 57 FPS, which is borderline for smooth gameplay. The Medium preset, however, provides 74 FPS, a 29.8% improvement over Ultra, with only a minimal visual compromise. This makes Medium the sweet spot for 1080p, offering a substantial safety margin above the 60 FPS threshold.

At 1440p, the situation becomes more constrained. The High preset produces 61 FPS, which is technically above 60, but leaves little room for frame time spikes. The Medium preset at 66 FPS offers a more comfortable margin, and the min FPS of 56 confirms that even in demanding scenes, performance stays within a playable range. For 1440p, Medium is the recommended preset, as it balances visual quality with a stable frame rate.

At 4K, the options are more limited. The Low preset achieves 89 FPS, which is excellent for this resolution, but the visual quality will be significantly reduced. The Medium preset at 56 FPS is below the 60 FPS target, and the min FPS of 47 suggests that stutter may occur in intense action sequences. For 4K, Low is the only setting that provides a consistently smooth experience, while Medium may be acceptable for players who prioritize visual fidelity over absolute smoothness.

How This Combo Ranks

The combo's rank of 2933 out of 3713 places it in the bottom 21% of all tested systems. This ranking is somewhat surprising given the measured FPS, which shows the system can handle 1080p and 1440p gaming well. The discrepancy suggests that many other combos in the database feature more powerful GPUs or CPUs, pushing this pairing down the list.

The CPU's percentile ranking of 79% is notably higher than the GPU's 58% percentile. This indicates that the Ryzen 7 5700G is a relatively stronger component compared to the RTX 2060. The CPU's average benchmark score of 27051 is nearly identical to its nearest rival, the Intel Core i9-9900K (27097, a -0.2% delta). In contrast, the GPU's average score of 15290 is closely matched by the GTX 580, a much older card, suggesting the RTX 2060 is showing its age.

The combination of a high-percentile CPU with a mid-range GPU results in a system that is likely CPU-limited in less demanding scenarios but GPU-limited in Overpower's more intensive settings. The combo rank reflects the overall balance, and while it is not a top-tier performer, the data shows it is a capable 1080p and 1440p machine.

GPU Role

The NVIDIA GeForce RTX 2060 is the primary driver of frame rates in Overpower, and its specifications illuminate why it performs as it does. The GPU has 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of memory bandwidth. This is a moderate amount of VRAM by modern standards, and at 4K Ultra settings, the game may be approaching the memory limit, contributing to the low 43 FPS average.

The GPU's clock speeds are 1365 MHz base and 1680 MHz boost, with memory running at 1750 MHz (14 Gbps effective). These clocks are respectable for a Turing architecture card, but the 12 nm process node means it runs at a 160 W TDP. The 1920 shading units and 48 ROPs are the workhorses for pixel rendering, and the 30 RT cores and 240 tensor cores are available for ray tracing and DLSS, though the measured FPS data does not indicate whether these features are enabled.

The RTX 2060's benchmark scores paint a picture of a mid-range performer. Its Passmark G3D score is 14111, and its 3DMark Steel Nomad DX12 score is 1242. The GPU's percentile ranking of 58% puts it just above the median, and its nearest rivals are all within 1% of its average score. This clustering suggests that the RTX 2060 is in a highly competitive performance tier, and its specific advantage in Overpower comes down to driver optimization and game-specific factors rather than raw compute power.

Measured FPS Breakdown

The complete set of measured FPS data provides a granular view of the system's capabilities across all tested configurations. At 1080p, the Low preset delivers 118 FPS, which is the highest frame rate recorded for this combo. The Medium preset drops to 74 FPS (with a min of 63 and max of 85), High reduces it to 68 FPS, and Ultra bottoms out at 57 FPS. This 61 FPS spread between Low and Ultra at 1080p highlights the significant impact of graphical settings on performance.

At 1440p, the pattern continues but with lower absolute numbers. Low produces 105 FPS, Medium 66 FPS (56-76 range), High 61 FPS, and Ultra 51 FPS. The drop from Low to Ultra is 54 FPS, slightly less than at 1080p, indicating that the GPU is becoming a more significant bottleneck at this resolution.

At 4K, the performance curve flattens considerably. Low achieves 89 FPS, Medium 56 FPS (47-64 range), High 52 FPS, and Ultra 43 FPS. The difference between Low and Ultra is only 46 FPS, and the Low to Medium drop is a substantial 33 FPS. This suggests that at 4K, even the Medium preset's additional rendering load overwhelms the GPU, making Low the only viable option for high frame rates.

CPU Role

The AMD Ryzen 7 5700G serves as the computational backbone of this system, and its specifications are well-suited for gaming workloads. The CPU features 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.80 GHz and a boost clock of 4.60 GHz. This is a 65 W TDP part, making it power-efficient, and it supports DDR4 memory in dual-channel configuration with a bandwidth of 51.2 GB/s.

The CPU's benchmark results demonstrate strong multi-threaded performance. Its Cinebench R23 multi-core score is 12830.5, and its single-core score is 1494. The Geekbench multi-core score of 9950 and single-core score of 1894 further confirm its capabilities. The CPU's Passmark multi-thread score of 24419 places it in the 79th percentile of all CPUs, with an average benchmark score of 27051.

In Overpower, the CPU's role is to feed the GPU with draw calls and game logic. The 8-core, 16-thread configuration ensures that even heavily threaded game engines have ample resources. The 16 MB of L3 cache is a significant asset for reducing memory latency. The nearest CPU rival, the Intel Core i9-9900K, is virtually identical in performance (0.2% faster), indicating that the Ryzen 7 5700G is a solid, if not exceptional, gaming CPU. The fact that the CPU's percentile ranking (79) is 21 points higher than the GPU's (58) underscores that the RTX 2060 is the limiting component in this pairing.